• Sleep Medicine and Psychophysiology
• /
• v.8 no.2
• /
• pp.129-137
• /
• 2001

Objectives: The purpose of this study is to investigate the effects of 38-hour sleep deprivation on fine motor performance. The Motor Performance Series (MPS) in the Vienna Test System (computerized neurocognitive function tests) was used in this study. Methods: Twenty four subjects participated in this study. Subjects had no past history of psychiatric disorders and physical illness. Subjects had normal sleep-waking cycle without current sleep disturbances and were all right-handed (Annett's Hand Preference Questionnaire: above +9 points). To minimize the learning effects, familiarization with the Vienna Test System was performed one day before the study. Subjects were to get up at 6:00 in the morning after getting enough sleep according to his or her usual sleep-wake cycle. After awakening, subjects remained awake for 38 hours under continuous surveillance. During two consecutive study days, the subjects tested MPS at 7 AM and 7 PM each day, which means the MPS was done four times in total. During the experiment, anything that could affect the subjects' sleep such as coffee, tea, alcohol, a nap, tiring sports, and all medications were prohibited. Results: In MPS, the fine motor functions of both hands decreased after 38 hours of sleep deprivation. The decrement in motor performance was prominent in the dominant right hand. In the right hand, the total number of tapping was reduced (p<.005), and the number of misses (p<.05) and the length of misses (p<.05) of line tracking, the total length of inserting a short pin (p<.01), the total length of inserting a long pin (p<.05), and the number of misses in aiming (p<.05) increased. Such performance decrement was distinct in the morning sessions. Conclusions: These results suggest that fine motor performance decrement during sleep deprivation is predominant in the right hand, which exerts maximal motor function. The finding of decrement in motor function in tapping during sleep deprivation also suggested that the time required for exhaustion of muscles is shortened during sleep deprivation. More deterioration of motor performance was shown in the morning, which could be explained as circadian rhythm effects.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.6
• /
• pp.540-549
• /
• 2001

Background : Usual interstitial pneumonia (UIP) is a progressive fibrous lung disease with occasional fatal outcomes. However, the extent and rate of progression varies markedly from one patient to another. As a result, it is difficult to determine the time of the initial treatment and assess the disease activity and course. Fibroblast foci (FF) is well known to synthesize collagen actively by their myofibroblasts component. However, the prognostic value of the FF have not been evaluated in patients with VIP. Therefore this study was undertaken to determine how the number of fibroblastic foci can reflect the disease activity and progression. Methods: Twenty patients with UIP(M : F=13 : 7), who were diagnosed by a surgical lung biopsy. The number of fibroblastic foci was analyzed in terms of its correlation with the clinical manifostations, pulmonary function test, arterial blood gas analysis, and a bronchoalveolar lavage(BAL). Results : The number of fibroblastic foci did not correlate with the various lung function tests and the other clinical parameters. Interestingly, the percentage of neutrophils in the bronchoalveolar lavage fluid did correlate with the quantity of the normalized Vv of FF(r=0.60, p<0.05). The patients were divided into 2 groups, group I and II, arbitrarily, according to the value of the normalized Vv. The clinical parameters and the PIT results were not different between the two groups. In particular, the survival rate between the two groups according to the Kaplan-Meier analysis were not different. Conclusion : A large number of FF does not imply a bad prognosis in patients with UIP.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.461-468
• /
• 2008

To obtain basic da1a on the preparation of Cudrania tricuspidata leaves tea, the quality and anti-oxidative characteristics of dried raw leaves (RT), pan-fired leaves tea (PT) and fermented leaves tea (FT) were investigated. General characteristics of RT, PT and FT, respectively, were: moisture content 18.47, 6.23 and 8.50%; crude protein content 17.77, 20.46 and 19.13%; and carbohydrate content 54.42, 62.52 and 61.96%. The crude lipid and ash contents were in the range 0.05 - 0.07% and 9.27 -10.74% respectively; the water soluble solid content was in the order FT > PT > RT and ranged from 23.10 - 37.38%; there were no significant differences in the total polyphenol content (815.24 - 835.16 mg%). Although $L^*$ values of PT (20.94) and FT (20.85) were lower than those of RT (34.71), the $a^*$ value in PT and the $b^*$ value in FT were highest. In all ethanol extracts the reducing power, electron-donating ability and superoxide dismutase (SOD)-like activity increased in a concentration-dependent manner. Furthermore, the activity in FT was higher than in PT or RT. The total free amino-acid content was higher in FT (1429.93 mg%) than RT (1108.94 mg%) or PT (833.13 mg%). The major amino acids were L-asparagine and L-valine in RT, L-cysteine and L-glutamic acid in PT and L-proline in FT. In a sensory evaluation of PT and FT, bitter and astringent tastes were decreased relative to RT, while sweet and savory tastes, flavor, color and overall acceptability were increased. These results indicate that FT bas a higher antioxidant effect and free-amino-acid content than PT, while the sensory quality of FT is similar to that of PT.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.77-93
• /
• 1999

This study is aiming at identifying the foreward and backward lingkage effects of the farm land base development project. Korean Government has continuously carried out farmland base development projets including the integrated agricultural development projects. large and medium scale irrigation projects and the comprehensive development of the four big river basin including tidal land reclamation and estuary dam construction for the all weather farming since 1962. the starting year of the five year economic development plans. Consequently the irrigation rate of paddy fields in Korea reached to 75% in 1998 and to escalate the irrigation rate, the Government had procured heavy investment fund from IBRD. IMF and OECF etc. To cope with the agricultural problems like trade liberalization in accordance with WTO policy, the government has tried to solve such problems as new farmland base development policy, preservation of the farmland and expansion of farmland to meet self-sufficiency of foods in the future. Especially, farmland base development projects have been challanged to environmental and ecological problems in evaluating economic benefits and costs where the value of non-market goods have not been included in those. Up to data, in evaluating benefits and costs of the projects, farmland base development projects have been confined to direct incremental value of farm products and it's related costs. Therefore the projects'efficiency as a decision making criteria has shown the low level of economic efficiencies. In estimating economic efficiencies including Leontiefs input-output analysis of the projects could not be founded in Korea at present. Accordingly this study is aimed at achieving and identifying the following objectives. (1) To identify the problems related to the financial supports of the Government in implementing the proposed projects. (2) To estimated backward and foreward linkage effects of the proposed project from the view point of national economy as a whole. To achieve the objectives, Hwangrak benefited area with reservoir which is located in Seosan-haemi Disticts, Chungnam Province were selected as a case study. The main results of the study are summarized as follows : a. The present value of investment and O & M cost were amounted to 3,510million won and the present value of the value added in related industries was estimated at 5.913million won for the period of economic life of 70 years. b. The total discounted value of farm products in the concerned industries derived by the project was estimated at 10,495million won and the foreward and backward linkage effects of the project were amounted to 6,760 and 5,126million won respectively. c. The total number of employment opportunities derived from the related industries for the period of project life were 3,136 man/year. d. Farmland base development projects were showed that the backward linkage effects estimated by index of the sensitivity dispersion were larger than the forward linkage effect estimated by index of the power of dispersion. On the other hand, the forward linkage effect of rice production value during project life was larger than the backward linkage effect e. The rate of creation of new job opportunity by means of implementing civil engineering works were shown high in itself rather than any other fields. and the linkage effects of production of the project investment were mainly derived from the metal and non-metal fields. f. According to the industrial linkage effect analysis, farmland base development projects were identified economically feasible from the view point of national economy as a whole even though the economic efficiencies of the project was outstandingly decreased owing to delaying construction period and increasing project costs.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.625-628
• /
• 2015

POLARBEAR is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic inflation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1.274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.720-725
• /
• 2003

Effects of Gastrodiae Rhizoma on serum lipids and body fat in rats fed high-fat diet supplemented with 10% (w/w) lard during 11-week experimental period were investigated. Ninety-six male rats were randomly divided into eight groups: A, negative control (lard 10%); B, positive control (lard 10%+rat chow+5 brix water extract); C, lard 10%+1% G. Rhizoma powder; D, lard 10%+5% G. Rhizoma powder; E, lard 10%+2 brix 50% ethanol extract; F, lard 10%+10 brix 50% ethanol extract; G, lard 10%+2 brix water extract; H, lard 10%+10 brix water extract. Body weight gain, although slightly higher in groups A, B, and G, did not differ significantly among dietary groups. Weights of liver, spleen, kidney, and testis were significantly higher among dietary groups. Serum total cholesterol and triglyceride concentrations were markedly higher in both control groups than group H (p<0.05). Serum HDL concentration was significantly higher in group E, and lower in group A (p<0.05). Serum LDL+VLDL concentration was significantly lower in groups E, G, and H (p<0.05). Serum testosterone level was slightly higher in groups E, D, and H. Blood glucose level was significantly higher in groups B and G, whereas lower in group H (p<0.05). Epididymal fat pad (EFP) was markedly higher in control groups than G. Rhizoma diet-fed groups (p<0.05). The results indicated that decrease in serum lipids (TC, TG, LDL+VLDL) and body fat, and increase in serum HDL and testosterone levels were higher in groups E and H extracts than groups fed G. Rhizoma powder.

• Journal of Life Science
• /
• v.27 no.12
• /
• pp.1421-1429
• /
• 2017

The present study was undertaken to investigate the effects of dietary provision of lactic acid bacteria (LB) and sea tangle (ST) on the obesity-associated intestinal microbiota in rats with obesity induced by a high-fat diet. Forty-eight 8-wk-old Sprague-Dawley rats were fed a basal diet (CON), a high fat diet (HFD; CON supplemented with 10% lard), HF supplemented with LB [HFL; $5{\times}10^8cfu$ of each of Lactobacillus rhamnosus, Lactobacillus johnsonii, Bifidobacterium longum and Bifidobacterium lactis], or HFL containing 10% ST (HFLS), with 4 replicates (cages) of 3 rats per dietary treatment, for 6 wk, and the intestinal microbiota were determined by pyrosequencing. The HFL and HFLS groups exhibited reduced rates of weight gain than the HF group, and the former groups had smaller ratios of Firmicutes and greater ratios of Bacteriodetes, with decreased Firmicutes/Bacteroidetes ratios, than the latter at the level of the phylum. Compared with the results for the HF group, HFL and HFLS had reduced ratios of the families of Roseburia, Mollicute, Erysipelotrichi, and Oscillibacter within Firmicutes associated with obesity and increased ratios of the families of Prevotella, Alistipes and Bacteroides within the Bacterioidetes phylum known to have an anti-obesity effect. The content of butyric acid in feces was greater in the HFLS group vs. HF and HFL. In conclusion, the present results suggest that dietary provision of LB plus ST has an anti-obesity effect and induced changes in intestinal microorganisms, and enhanced the content of butyric acid, which is an intestinal metabolite.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Archives of design research
• /
• v.12 no.4
• /
• pp.33-44
• /
• 1999

Fashion is subjected to newness and change by itself. Fashion trend and tendency which could predict next season akeady indicated that digital and cybel11ation environment lliould be factors in fashion. Changes in future life styles and values caused by digital environment must be variables as fashion objects by themselves. Therefore digital environment of a fashion itself and that all encountered in fashion will not only be an existing situation but also an objective and a factor which must be pursued with fashionable sense in future fashion. Advanced technology and social change in relation to digital environment requires that educational method as well as its content will be changed on the scene of education for future. Thus we should seek an educational direction in fashion design for future society in which digital environment requires new paradigm. Subject to these backgrounds this study has an intension to study the change in fashion extensively influenced by expanded digital environment on a limited situational level of fashion design education and to suggest an educational direction for professional in future fashion design who will serve as a core of fashion area in the future. It is essential that education of professional in fashion for future should be achieved by digital-minded level that eagerly understands and accepts future society in which digital environment will be a main axis. It is necessary for this to make them expetience computers, digital media including CAD program. We have to note that education of digital media is more effective and applicable when accomplished in CAI level which can be related and expetienced with fashion education rather than mere functional training in media themselves. Intellectual creativity will be a vety source of producing values and national competence in 21st centtury. Education of design professional in fashion area must positively accept these environmental charactetistics in future society, as well as deeply reflect the education for the future.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.195-205
• /
• 2016

Sugar beet cyst nematode, Heterodera schachtii, causes serious economic losses worldwide in Brassicaceae crops. In 2011, this nematode was first found in highland vegetable cultivation areas in Korea, and thereafter spread to the surrounding healthy Chinese cabbage fields. However, little has been documented on the biological and ecological characteristics of the sugar beet nematode in highland vegetable cultivation areas. In this study the dispersal of the sugar beet cyst nematode was examined, focusing on spreading through soil and/or water infested with the nematode. When farmers with work boots trampled on Chinese cabbage fields for 10 minutes, the number of cysts recovered from the soil attached to the working differed depending on the research sites. Under irrigation conditions of 2, 4, and 8 liters of water per $m^2$, the amounts of soils attached on the bottom of the work boots and the number of healthy cysts in the soils increased significantly with the increase in soil moisture, although the total number of cysts, eggs, and juveniles did not increase significantly. After driving on the farm road adjacent to cabbage fields infested with the sugar beet cyst nematode, cysts were also recovered from the soil attached to the vehicle's tires, suggesting that the sugar beet cyst nematode can spread to new fields through soil carried by vehicles and by farmers. An excavator and a motor truck could deliver 41 kg and 224 g, respectively, of soil on the shovel shoes and the wheels to other locations during the Chinese cabbage harvest, suggesting that farming equipment and transportation vehicles may be vital means by which the cyst nematode spreads to non-infested fields in the highland area of Korea. Runoff water also contained cysts, whose amounts increased after water irrigation onto the ridges to simulate rainy conditions, with no significant difference in the number of cysts with increasing amounts of irrigation water. All of these results confirmed that the sugar beet cyst nematode spreads through soil attached to work boots, harvesting tools, and transportation vehicles, especially during the harvest time, and through runoff water on rainy days. These observations suggest that personal sanitization and cleaning of working tools and vehicles are one of the most important means to prevent the dispersal of the sugar beet cyst nematode in fields.