• 제목/요약/키워드: 1/100 scale model

검색결과 191건 처리시간 0.032초

규모문제를 고려한 수문응답의 해석: 2. 적용 및 분석 (Hydrologic Response Analysis Considering the Scale Problem: Part 2. Application and Analysis)

  • 성기원;선우중호
    • 물과 미래
    • /
    • 제28권5호
    • /
    • pp.117-127
    • /
    • 1995
  • 해상도를 고려하는 GIUH 모형에 대한 적용과 분석을 평창강 유역의 소유역인 이목정유역에 대하여 수행하였다. 모형의 적용과 Fractal 분석을 위해 1:25,000, 1:50,000 그리고 1:100,000 축척의 지도를 이용하였다. 따라서 축척간의 비율이 일정한 값을 갖는다. 링크의 길이는 해상도 1mm의 구장기를 이용하였고 Fractal 차원은 Richardson 방법을 사용하였다. 지도의 축척에 따라 매개변수들의 현저한 변화를 발견하였으며 이러한 경향은 매개변수의 물리적 의미를 상실하게 한다. 그런데 Fractal 변환과 의 Melton지형법칙은 이러한 규모문제를 효과적으로 조정해주는 역할을 할 수 있다. 그리고 이 방법은 하도망과 유역간의 연관성을 모형에 반영할 수 있는 장점이 있다. 이 연구에서 제안한 GIUH의 적용성을 검증하기 위해 지수형 GIUH 모형과 비교하였다. 그 결과 제안된 2모수 gamma GIUH 모형이 좋은 재현성을 보였다. 따라서 Fractal 이론을 도입한 2모수 gamma GIUH 모형은 축척을 고려하는 IUH를 유도하는데 있어서 적절하다고 할 수 있다.

  • PDF

EQUIPARTITION JET MODEL FOR THE SEYFERT 1 GALAXY 3C120

  • Hyung, Siek
    • Journal of Astronomy and Space Sciences
    • /
    • 제20권3호
    • /
    • pp.163-174
    • /
    • 2003
  • The motion of 3C 120 Jet relative to the core is reasonably uniform and the VLBI scale jet connects outwards to a VLA ~ 100kpc scale. We measured the jet width variation from the center and found some indication of a power law which indicates the jet expands roughly with a constant opening angle and a constant flow velocity, $V_{f}{\cong}c$, from subparsec scales to ~ 100 kpc. With such a constant flow velocity and based on other physical parameters deduced from observed emission characteristics of the jet, we have established an equipartition jet model which might accommodate the basic parameters of the jet on subparsec scales, with which one can fit the radio intensities over all the scale of the jet even to ~100 kpc.

축소모델 기법을 이용한 대규모 접지계의 특성분석 (Characteristic Analysis elf Large Grounding system by Using Reduced Scale Model Method)

  • 장석훈;이재복;명성호;조연규;김점식
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권3호
    • /
    • pp.162-167
    • /
    • 2004
  • The scale model grounding systems to study the behavior of grounding system in uniform soils have been designed and fabricated. Constructional details and instrumentation have been discussed. To verify the accuracy of the results obtained from the experimental tests, they have been compared with computer calculation results. Also, in order to assess the effectiveness of bonding two grounding systems, grounding grid conductors which were downsized as a scale factor of 100:1 were analyzed by using the scale model method. A profile of GPR(Grounding Potential Rise) of each case was measured. The scale model grounding system presented in this paper can be valuable tool to analyze the ground potential profile and ground resistance of practical grounding system.

Monitoring system for the wind-induced dynamic motion of 1/100-scale spar-type floating offshore wind turbine

  • Kim, C.M.;Cho, J.R.;Kim, S.R.;Lee, Y.S.
    • Wind and Structures
    • /
    • 제24권4호
    • /
    • pp.333-350
    • /
    • 2017
  • Differing from the fixed-type, the dynamic motion of floating-type offshore wind turbines is very sensitive to wind and wave excitations. Thus, the sensing and monitoring of its motion is important to evaluate the dynamic responses to the external excitation. In this context, a monitoring system for sensing and processing the wind-induced dynamic motion of spar-type floating offshore wind turbine is developed in this study. It is developed by integrating a 1/00 scale model of 2.5MW spar-type floating offshore wind turbine, water basin equipped with the wind generator, sensing and data acquisition systems, real-time CompactRIO controller and monitoring program. The scale model with the upper rotatable blades is installed within the basin by means of three mooring lines, and its translational and rotational motions are detected by 3-axis inclinometer and accelerometers and gyroscope. The detected motion signals are processed using a real-time controller CompactRIO to calculate the acceleration and tilting angle of nacelle and the attitude of floating platform. The developed monitoring system is demonstrated and validated by measuring and evaluating the time histories and trajectories of nacelle and platform motions for three different wind velocities and for eight different fairlead positions.

Reynolds number and scale effects on aerodynamic properties of streamlined bridge decks

  • Ma, Tingting;Feng, Chaotian
    • Wind and Structures
    • /
    • 제34권4호
    • /
    • pp.355-369
    • /
    • 2022
  • Section model test, as the most commonly used method to evaluate the aerostatic and aeroelastic performances of long-span bridges, may be carried out under different conditions of incoming wind speed, geometric scale and wind tunnel facilities, which may lead to potential Reynolds number (Re) effect, model scaling effect and wind tunnel scale effect, respectively. The Re effect and scale effect on aerostatic force coefficients and aeroelastic characteristics of streamlined bridge decks were investigated via 1:100 and 1:60 scale section model tests. The influence of auxiliary facilities was further investigated by comparative tests between a bare deck section and the deck section with auxiliary facilities. The force measurement results over a Re region from about 1×105 to 4×105 indicate that the drag coefficients of both deck sections show obvious Re effect, while the pitching moment coefficients have weak Re dependence. The lift coefficients of the smaller scale models have more significant Re effect. Comparative tests of different scale models under the same Re number indicate that the static force coefficients have obvious scale effect, which is even more prominent than the Re effect. Additionally, the scale effect induced by lower model length to wind tunnel height ratio may produce static force coefficients with smaller absolute values, which may be less conservative for structural design. The results with respect to flutter stability indicate that the aerodynamic-damping-related flutter derivatives 𝘈*2 and 𝐴*1𝐻*3 have opposite scale effect, which makes the overall scale effect on critical flutter wind speed greatly weakened. The most significant scale effect on critical flutter wind speed occurs at +3° wind angle of attack, which makes the small-scale section models give conservative predictions.

축소모형실험을 통한 토목섬유 보강토옹벽의 수평변위 및 수직응력 평가 (Evaluation of Lateral Deformation and Vertical Stress of Geosynthetics Reinforced Walls by the Scale Model Test)

  • 조삼덕;이광우;유승경
    • 한국지반신소재학회논문집
    • /
    • 제16권4호
    • /
    • pp.119-127
    • /
    • 2017
  • 보강토체 상부에 작용하는 상재하중과 보강재의 인장강도 및 포설 단수가 보강토옹벽의 변형거동에 미치는 영향을 평가하기 위해 7종류의 축소모형 보강토옹벽을 축조하여 상재하중 재하실험을 수행하였다. 축소모형 보강토옹벽은 $100cm{\times}140cm{\times}100cm$ 크기의 모형토조 내에서 1m 높이로 축조하였으며, 인장강도가 상이한 3종류의 보강재를 사용하여 포설 단수를 5단, 7단, 9단으로 변화시키고, 5종류(50, 100, 150, 200, 250kPa)의 상재하중을 단계적으로 재하하면서 전면벽체의 수평변위와 보강재의 인장변형률 및 보강토체 저면의 수직응력 등을 측정하여 분석하였다. 분석 결과, 전면벽체의 수평변위는 보강토옹벽 하단부에서 가장 작고 보강토옹벽 하단으로부터 0.7H (H : 옹벽 높이) 지점에서 가장 큰 비선형적인 형태를 보여주며, 상재하중이 작고 보강재의 인장강도가 클수록 보강재의 상대적인 보강효과가 크게 발현되어 보강토체 하부의 수직응력이 작게 나타남을 알 수 있었다.

방조제 전면 해안침식 방지를 위한 수제공 설치 방안 수리모형실험 (Hydraulic scale model test on design of groin to protect coast against erosion)

  • 박영진;장정렬;조진훈;권순국
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2003년도 학술발표논문집
    • /
    • pp.455-458
    • /
    • 2003
  • A hydraulic scale model test with movable bed was performed to obtain design data for groins to protect the coast in front of the Sang-ri seadike in Sukmodo, located in the Han-river estuary area. The vertical scale of the model is 1/100 and the horizontal scale 1/250 according to Froude similitude. The result of test for original coast and groins showed that the coast in front of the Sang-ri seadike was eroded by tidal current. Three alternatives for the planning of new groins were tested. It is concluded that the alternative B-3 test scheme was the best plan to protect the coast among others.

  • PDF

Review of Operational Multi-Scale Environment Model with Grid Adaptivity

  • Kang, Sung-Dae
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제10권S_1호
    • /
    • pp.23-28
    • /
    • 2001
  • A new numerical weather prediction and dispersion model, the Operational Multi-scale Environment model with Grid Adaptivity(OMEGA) including an embedded Atmospheric Dispersion Model(ADM), is introduced as a next generation atmospheric simulation system for real-time hazard predictions, such as severe weather or the transport of hazardous release. OMEGA is based on an unstructured grid that can facilitate a continuously varying horizontal grid resolution ranging from 100 km down to 1 km and a vertical resolution from 20 -30 meters in the boundary layer to 1 km in the free atmosphere. OMEGA is also naturally scale spanning and time. In particular, the unstructured grid cells in the horizontal dimension can increase the local resolution to better capture the topography or important physical features of the atmospheric circulation and cloud dynamics. This means the OMEGA can readily adapt its grid to a stationary surface, terrain features, or dynamic features in an evolving weather pattern. While adaptive numerical techniques have yet to be extensively applied in atmospheric models, the OMEGA model is the first to exploit the adaptive nature of an unstructured gridding technique for atmospheric simulation and real-time hazard prediction. The purpose of this paper is to provide a detailed description of the OMEGA model, the OMEGA system, and a detailed comparison of OMEGA forecast results with observed data.

  • PDF

축소모형법을 이용한 흡음재와 확산체 배치조건별 교실의 음향성능 측정 및 평가 (The Measurements and Evaluations on the Configurations of Absorptive and Diffusing Treatments in Classrooms using a Scale Model)

  • 최영지
    • 교육시설 논문지
    • /
    • 제20권1호
    • /
    • pp.37-44
    • /
    • 2013
  • The present study examines the effects of periodic type diffusers for producing the preferred acoustics for speech and determines the more successful configurations of sound-absorbing and diffusing treatments for achieving good acoustics in classrooms. The measurements were carried out in a 1/10 scale model classroom systematically adding diffusers to one or more of four surfaces of the room. A total of 13 combination of diffusers with absorptive treatments were investigated. Adding diffusers on the ceiling were more effective to increasing the early-arriving reflection energy($G_{50}$) than adding absorptive materials on the entire ceiling. The late arriving reflection energy($G_{late}$) was decreased with increasing amounts of diffusing treatments of upper front or rear wall and this resulted in achieving higher early-to-late ratios($G_{50}$). Adding diffusers on the upper front wall($AC_{100}DUFW_{26}$) achieved more uniform acoustical conditions over the receiver positions than adding diffusers on the upper rear wall($AC_{100}DUFW_{26}$). Adding diffusers on the ceiling and absorptive materials on the lower front wall($AC_{75}DC_{25}ALFW_{26}$) achieved better acoustical conditions than adding the absorptive materials on the entire ceiling and lower front wall($AC_{100}ALFW_{26}$).

PSCF 모형의 개발과 제어변수의 결정 (Development of PSCF Model and Determination of Proper Values of Control Parameters)

  • 정장표;이승훈
    • 한국대기환경학회지
    • /
    • 제22권1호
    • /
    • pp.135-143
    • /
    • 2006
  • The objective of this study is to develop PSCF (potential source contribution function) program and determine the optimal values of control parameters to enhance the prediction of PSCF modeling. This study provides an important information and methodologies that can be used to get better results of locating influencing sources, especially unknown and fugitive sources. To determine proper values of control parameters in PSCF model, the diagnostic assessment on the results obtained by the various input conditions was carried out. PSCF model has created and improved from version 1.0 to version 7.0 since 200 I and the measured data (at least > 100) of receptor, and the values of control input parameters should be arranged and determined to obtain reliable results in PSCF modeling. The size of modeling domain must be determined to include enough trajectories to get reliable results. And the size of grid is recommended to be 2.5 $\sim$ 5 degrees for global scale, 0.2 $\sim$ 1 degrees for regional scale and 0.05 degree for local scale.