• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.165-174
• /
• 1999

Boar semen can be frozen successfully. However, there is a large variability in the extent of damage boar semen samples experiences during cryopreservation. This experiment was undertaken to find out factors that affect a post-thaw viability of boar spermatozoa. For this purpose, cryodiluents(BF5, LEY, Soejima and M-Soejima), cryoprotectants(glycerol. ethylene glycol, and propylene glycol), pre-freezing method(dryice-pellet, dryice-straw and L$N_2$vapour-st-raw) and total time required for freezing(2. 5, and 7 h) were compared as a factors. To investigate quality of semen during freezing process, motility(%), normal apical ridges(%, NAR), and proportion of living sperm(%) by flow cytometic analysis were assessed after collection, cooled, pre-frozen and post-thawing. Post-thaw motility of semen diluted with M-Soejima was 52.0%, respectively. When heparin, caffeine or heparin＋caffeine was added to 2nd cryodiluent of M-Soejima during freezing process, the highest motility after thawing was shown at the addition of caffeine (2mM), with 61.7$\pm$2.9% of motility. M-Soejima with heparin or caffeine was significantly higher than that of controI(p＜0.05). The result using glycerol(Gly), ethylene glycol(EG), propylene glycol(PG), and their mixture (Gly＋EG and Gly＋PG) as cryoprotectants, the highest motility was shown at the mixture treatment with Gly plus PG. However, the highest proportion of live spermatozoa was shown at Gly＋EG, there was no significantly difference among treatments(p＞0.05). When semen was pre-frozen with three manners(dryice-pellet, dryice-straw, and L$N_2$ vapor-straw), motility(%) of post-thaw spermatozoa was the highest in the L$N_2$ vapor-straw pre-freezing method of M-Soejima cryodiluent with 57.5% of motility, For a simple, economical and timesaving approach to freezing boar semen, total time required for freezing were 2, 5, and 7 hours, post-thaw motility were 43.8, 45.0 and 38.8%, NAR were 19.5, 22.7 and 28.5%, and viability were 20.8, 19.9 and 22.1%, respectively. This data suggests that boar semen diluted with M-Soejima cryodiluent contained caffeine, using mixture of glycerol and propylene glycol or ethylene glycol as cryoprotectants, frozen with 2 hours, can be taken better motility, NAR, and proportion of live spermatozoa.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.181-192
• /
• 2015

The aim of this study is to obtain optimum process condition for using two tower distribution to recycle the waste Propylene Glycol Monomethyl Ether Acetate (PGMEA) that is formed after washing LCD. The optimum process condition for the content of PGMEA, which is dependent variable, at 1st distillation was calculated according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures, and the optimum process conditions and optimum factors for the content of PGMEA at 2nd distillation according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures. At 1st distillation, Reflux amount, Feed amount, and Feed temperature are significant variables. However, it is found that the BTM temperature range is not significant in the range of process condition used in this study. The optimum process conditions are based on $5700{\ell}$ of Feed amount, $2500{\ell}$ of Reflux amount, $165^{\circ}C$ of BTM temperature, and $130^{\circ}C$ of Feed temperature. For the this condition, the predicted content of PGMEA was calculated as 92.12~94.62%. Significant factors at 2nd distillation are Reflux amount, Feed amount, and BTM temperature. Multicollinearity is between Reflux amount and BTM temperature. BTM was omitted in the multiple regression equation because there is a strong positive correlation between Reflux amount and BTM temperature. Base on $199^{\circ}C$ of BTM temperature, The optimum process conditions are based on $4275{\ell}$ of Feed amount, $6200{\ell}$ of Reflux amount and $130^{\circ}C$ of Feed temperature. In this condition, the predicted content of PGMEA was calculated as 99.0~99.5%.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.259-266
• /
• 2010

Porous poly(propylene) supported gel polymer electrolytes (GPE) were synthesized by thermal polymerization of DEGDMA [Di(ethylene glycol) dimethacrylate] in electrolyte solutions (1 M solution of $LiPF_6$ in EC/DEC 1 : 1 mixture) at $70^{\circ}C$. AC impedance spectroscopy and cyclic voltammetry were used to evaluate its ionic conductivity and electrochemical stability window of the GPE membranes. Lithium ion battery (LIB) cells were also fabricated with $LiNi_{0.8}Co_{0.2}O_2$/graphite and GPE membranes via thermal polymerization process. Through the thermal polymerization, self sustaining GPE membranes with sufficient ionic conductivities (over $10^{-3}\;S/cm$) and electrochemical stabilities. The LIB cell with 5% monomer showed the best rate-capability and cycleability.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.107-112
• /
• 2002

To investigate the feasibility of developing a novel melatonin plaster, the effects of vehicles and drug loading dose on the in vitro permeation of melatonin across dorsal hairless mouse skin from pressure-sensitive adhesive (PSA) matrices were examined. Vehicles employed were propylene glycol laurate (PGL), propylene glycol monocaprylate (PGMC) and diethylene glycol monoethyl ether (DGME). Among PSAs used, only $Duro-Tak^{\circledR}$ 87-2196 showed a good peeling property. The release from $Duro-Tak^{circledR}$ 87-2196 was proportional to the square root of time, and dose-dependent. The fluxes increased as the loading dose increased over the doses under solubility. The relatively high permeation flux $(3.03{\pm}1.37\;{\mu}g/cm^2/hr)$ was obtained when using PGMC at the melatonin loading dose of $45\;mg/140\;cm^2$. Lag time was not affected by the vehicles used but by the thickness spread. The melatonin plasters prepared using PGMC showed a good adhesive property onto skin, and showed no crystal formation.

• Archives of Pharmacal Research
• /
• v.27 no.7
• /
• pp.763-768
• /
• 2004

To investigate the feasibility of developing a new quercetin transdermal system, a preformulation study was carried out. Therefore, the effects of vehicles and pressure-sensitive adhesives (PSA) on the in vitro permeation of quercetin across dorsal hairless mouse skin were studied. Among vehicles used, propylene glycol monocaprylate (PGMC) and propylene glycol mono-laurate were found to have relatively high permeation flux from solution formulation (i.e., the permeation fluxes were 17.25$\pm$1.96 and 9.60$\pm$3.87 $\mu\textrm{g}$/$\textrm{cm}^2$/h, respectively). The release rate from PSA formulations followed a matrix-controlled diffusion model and was mainly affected by the amount of PSA and drug loaded. The overall permeation fluxes from PSA formulations were less than 0.30 $\mu\textrm{g}$/$\textrm{cm}^2$/h, which were significantly lower compared to those obtained from solution formulations. The lower permeation fluxes may be due to the decrease of solubility and diffusivity of quercetin in the PSA layer, considering the fact that the highest flux of 0.26 $\mu\textrm{g}$/$\textrm{cm}^2$/h was obtained with the addition of 0.2％ butylated hydroxyanisole in PGMC-diethyl-ene glycol monoethyl ether co-solvents (80-85 ： 15-20, v/v). Taken together, these observations indicate that improvement in the solubility and diffusivity of quercetin is necessary to realize fully the clinically applicable transdermal delivery system for the drug.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.560-565
• /
• 1997

The physicochemical properties of melatonin (MT) in propylene glycol (PG) and 2-hydroxypropyl-.betha.-cyclodextrin $(2-HP{\beta}CD)$ vehicles were characterized. MT was endothermally decomposed as determined by differential scanning calorimetry (DSC). Melting point and heat of fusion obtained were $116.9{\pm}0.24^{\circ}C $.and $7249{\pm}217 cal/mol$., respectively. MT as received from a manufacture was very pure, at least 99.9%. The solubility of MT in PG solution increased slowly until reaching 40% PG and then steeply increased. Solubility of MT increased linearly as concentration of $2-HP{\beta}CD$ without PG INCREASED$(R^2=0.993)$. MT solubility in the mixtures of pg and $2-HP{\beta}CD$ also increased linearly but was less than the sum of its solubility in $2-HP{\beta}CD$ and PG individually. The MT solubility was low in water, simulated gastric or intestinal fluid but the highest in the mixture of PG(40v/v%) and $2-HP{\beta}CD$ (30w/v%) although efficiency of MT solubilization in $2-HP{\beta}CD$ decreased as the concentration of PG increased. MT was degraded in a fashion of the first order kinetics $(r^2>0.90)$. MT was unstable in strong acidic solution (HCl-NaCl buffer, pH 1.4) but relatively stable in other pH values of 4-10 at $70^{\circ}C$. In HCl-NaCl buffer, MT in 10% PG was more quickly degraded and then slowed dpwm at a higher concentration. However, the degradation rate constant of MT in 2-HP.betha.CD was not changed significantly when compared to the water. The current studies can be applied to the dosage formulations for the purpose of enhancing percutaneous absorption or bioavailability of MT.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.88-96
• /
• 1983

The effect of lowering water activity of various humectants has been reported in the previous papers. In this study, that effect of humectants used in combination with each other was discussed. Additionally, the Aw measurements were also compared to the predicted values of Aw derived from the equation of Raoult's law and the linear slope method by Sloan and Labuza. Each mixed humectant was thought to be salted-out by the other, and thus Aw values were observed to be somewhat lower as the result in all model preparations. The effect of lowering water activity by NaCl was the highest, and the efficiency of reduction of Aw was decreased in the order of NaCl, sodium lactate, glycerin, propylene glycol and sorbitol when each of them was combinated with other humectants. Aw values calculated by the equation of Raoult's law were not agreed so well to the measured Aw, so it was likely not to be the useful method for predicting Aw values in mixed humectants to far as they have showed higher ability for lowering Aw in the previous papers. The equations of prediction were derived from Aw values to be measured actually in the model Kamaboko.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.41-62
• /
• 2003

In this research, we manufactured the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent, and compared the composition of solvents, the coefficient of thermal expansion, the particle size distribution, the viscosity and bonding strength to metal, and the tone with those of the commercial products(Duceram Plus, Duceram GmbH; VMK 95, Vita Co.; Noritake EX-3, Noritake Co.)used in the clinical field. The results of the research were as follows: 1. The result of solvent analysis indicated that the solvents included in the paste opaque porcelains of the control group were mainly composed of Glycols. 2. From the Coefficient of thermal expansion measurement, we drew out the following results; testing group: $14.0\times10^{-6}/^{\circ}C$, Duceram Plus: $13.9\times10^{-6}/^{\circ}C$, VMK 95: $14.3\times10^{-6}/^{\circ}C$, and Noritake EX-3: $13.3\times10^{-6}/^{\circ}C$. 3. Seen from the result of particle size distribution measurement, the experimental group was similar to the control group in 1$\mu m$ below, but the experimental group marked the highest distribution of 61% in the case of between 1$\mu m$ and 5$\mu m$. Between 5$\mu m$ and 10$\mu m$, they showed relatively similar distribution, and Noritake EX-3 was turned out the highest distribution of 29% in 10$\mu m$ above. 4. From the result of viscosity measurement, Duceram plus showed the highest viscosity throughout all the measurements followed by Noritake Ex-3, experimental group and VMK 95 in decreasing order. 5. The result of bonding strength measurement was EX 35.53 $\beta\acute{A}$, DU 40.88 $\beta\acute{A}$, VM 39.43 $\beta\acute{A}$, and NO 35.39 $\beta\acute{A}$, and no significant difference was found between the experimental group and the control groups(P>0.05). 6. The measurement of the tone indicated that the $L^*$ value of the experimental group was 86.89 0.63 in average, which is higher than the control group in its brightness. In the case of the $a^*$ value, Duceram Plus, VMK 95 and EX-3 showed positive value, whereas the testing group was turned out negative value. In $b^*$ value, Duceram Plus proved the highest. From the results of this research, the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent did not make differences from the commercial products that are actually used in the clinical fields. Therefore, it is possible to utilize Propylene Glycol (PG) and Buthylene Glycol (BG) for the paste opaque porcelains of P.F.M crown. It is also recommended that further researches concerning the compositions and forms of powder, the types of organic solvent components and the ratio of mixture proceeded in order to improve the level of productivity in the future.

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.49-53
• /
• 2003

Polyurethane (PU) layer and copolymer consisted of the different molecular weights (1000 and 2000 g/mol) of poly(propylene glycol) (PPG) were prepared. The damping and mechanical properties of these materials were compared with PU 1000 made by PPG having the molecular weight of 1000 g/mol. The optimum composition of PU2000 used for PU layer and copolymer was diphenylmethane diioscynate (MDI)/propylene glycol (PPG)/butanediol (BD) (1/0.3/0.7) based on the damping and mechanical properties. The damping peak of PU copolymer was higher than those of PU layer and PUI 1000 in low temperature range (-30- $10^{\circ}C$). For application in noise reduction, the transmission loss of the mechanical vibration through solid structure was measured. PU layer and copolymer were used as a damping layer. The transmission loss of PU copolymer was more effective than those of PU layer and PU 1000 in the experimental frequency range.

• Korean journal of food and cookery science
• /
• v.33 no.2
• /
• pp.198-208
• /
• 2017

Purpose: To improve the quality of basic gluten-free rice bread composed of white rice flour, salt, sugar, yeast, skim milk powder, olive oil, and water, the effects of transglutaminase (TGase), whey protein (WP), propylene glycol alginate (PGA), and hydroxypropylmethylcelluose (HPMC) were investigated. Methods: TGase, WP, PGA, and HPMC were added to rice flour cumulatively. The pasting properties of rice flour blends as well as volume, shape, color value, textural properties and sensory evaluation of basic rice bread (RB1) RB1+TGase (RB2), RB1+TGase+WP (RB3), RB1+TGase+WP+PGA (RB4), and RB1+TGase+WP+PGA+HPMC (RB5) were compared. Results: Consistency of rice batter increased upon addition of TGase, WP and PGA, and RB3 and RB4 had higher specific volumes than others. PGA improved volume, crumb air cell uniformity, and resilience but lowered elasticity and moistness of RB. HPMC increased, hardness, moistness and softness, and slightly reduced volume. Conclusion: Therefore, it is suggested that hydrocolloids, PGA and HPMC may be necessary to improve volume, crumb structure, textural properties and overall eating quality of gluten-free rice bread.