• Clean Technology
• /
• v.24 no.1
• /
• pp.55-62
• /
• 2018

The adsorbent used in water-adsorption cooling system utilizing low-temperature heat of below $90^{\circ}C$ is required to exhibit high water uptake capacity at a relative humidity ($P/P_0$) between 0.1 and 0.3. Mesoporous silica (MCM-41) and MOF(MIL-101) exhibit quite large water adsorption capacity under saturated water vapor at $35^{\circ}C$. However, these adsorbents show small water adsorption capacity ($0.027{g_{water}\;g_{ads}}^{-1}$, $0.074{g_{water}\;g_{ads}}^{-1}$, respectively) in the relative humidity ($P/P_0$) range of 0.1 to 0.3. In this study, the surface properties of mesoporous silica and MOF were modified by simple methods to develop an adsorbent having a higher water uptake than the conventional water adsorbents at a relative humidity ($P/P_0$) of 0.1 ~ 0.3. In the case of mesoporous silica (MCM-41) exhibiting mainly water adsorption at $P/P_0=0.5{\sim}0.7$, aluminum species was functionalized on the mesopore walls and then cations existing near the aluminum were exchanged with various cations (e.g., $Na^+$, ${NH_4}^+$, and $(C_2H_5)_4N^+$). In addition, 20 wt% (to total weight of the composites) of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MCM-41. In the case of the MIL-101 (MOF), 20 wt% of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MIL-101. The MCM-41 which was ion-exchanged with various cations has main adsorption branch around 0.5 of $P/P_0$ which was slightly shifted with low-pressure direction in comparison with pristine MCM-41. However, tiny increases were observed on the adsorption in the range of $P/P_0$ between 0.1 and 0.3. After salt impregnation on the MCM-41, the adsorption capacity under $P/P_0=0.1{\sim}0.3$ at $35^{\circ}C$ was increased from $0.027{g_{water}\;g_{ads}}^{-1}$ to $0.152{g_{water}\;g_{ads}}^{-1}$. In the case of MIL-101, the amount of water adsorption at $35^{\circ}C$ under $P/P_0=0.1{\sim}0.3$ was increased from $0.074{g_{water}\;g_{ads}}^{-1}$ to $0.330{g_{water}\;g_{ads}}^{-1}$ after the salt impregnation.

• Journal of radiological science and technology
• /
• v.26 no.4
• /
• pp.27-32
• /
• 2003

To evaluate usefulness of a functional tracheobronchial phantom for interventional procedure. The functional phantom was made as a actual size with human normal anatomy used silicone and a paper clay mold. A tracheobronchial-shape clay mold was placed inside a square box and liquid silicone was poured. After the silicone was formed, the clay was removed. We measured film density and tracheobronchial angle at the human, animal and phantom, respectively. The film density of trachea part were 0.76(${\pm}0.011$) in human, 0.97(${\pm}0.015$) in animal, 0.45(${\pm}0.016$) in phantom. The tracheobronchial bifurcation part measured 0.51(${\pm}0.006$) in human, 0.65(${\pm}0.005$) in animal, 0.65(${\pm}0.008$) in phantom. The right bronchus part measured 0.14(${\pm}0.008$) in human, 0.59(${\pm}0.014$) in animal and 0.04(${\pm}0.007$) in phantom. The left bronchus were 0.54(${\pm}0.004$) in human, 0.54(${\pm}0.008$) in animal and 0.08(${\pm}0.008$) in phantom. At the stent part were 0.54(${\pm}0.004$) in human, 0.59(${\pm}0.011$) in animal and 0.04(${\pm}0.007$) in phantom, respectively. The tracheobronchial angle of the left bronchus site were $42.6({\pm}2.07)^{\circ}$ in human, $43.4({\pm}2.40)^{\circ}$ in animal and $35({\pm}2.00)^{\circ}$ in phantom, respectively. The right bronchus site were $32.8({\pm}2.77)^{\circ}$ in human, $34.6({\pm}1.94)^{\circ}$ in animal and $50.2({\pm}1.30)^{\circ}$ in phantom, respectively. The phantom was useful for in-vitro testing of tracheobronchial interventional procedure, since it was easy to reproduce.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.231-237
• /
• 2005

This study was carried out to evaluate the breeding values for economic traits in Korean native chicken on the basis of 11,583 birds of record along 7 generations collected from 1995 to 2001 at National Livestock Research Institute, Korea. The results obtained are summarized as follows : The breeding value estimates of the body weights at 150 and 270 days in Dark Brown, Light Brown, Gray Brown, Black and White strains were $-16.563\~0.474\;and\;-18.836\~21.700,\;-14.714\~9.272\;and\;-23.025\~11.297,\; -25.186\~12.953\;and\;-28.368\~18.156,\;-15.549\~6.329\;and\;-18.264\~4.963,\;-10.708\~20.284\; and\;-25.112\~10.132g$, respectively. The breeding value estimates of the ages at first egg in Dark Brown, Light Brown, Gray Brown, Black and White strains were $-1.236\~0.047,\;-1.509\~0.298,\;-1.362\~0.114,\;-1.436\~0.199\;and\;-1.385\~0.718$, respectively. The breeding value estimates of the egg weight at first egg and at 270 days were $-0.105\~0.075\;and\;-0.120\~0.398,\;-0.109\~0.042\;and\;-0.205\~0.173,\;-0.166\~0.084\;and\;-0.256\~0.091,\;-0.119\~0.066\;and\;-0.051\~0.132,\;-0.112\~0.027\;and\;-0.070\~0.101g$, respectively. The breeding value estimates of the egg Production to 270 days in Dark Brown, Light Brown, Gray Brown, Black and White strains were $0.298\~l.807,\;-0.049\~l.146,\;-0.396\~l.125,\;-1.206\~l.173\;and\;-0.474\~2.641$, respectively.

• 한국해양학회지
• /
• v.12 no.1
• /
• pp.41-47
• /
• 1977

The present paper deals with nine kinds of trace metal contents among 79 samples, more than 20 species of edible marine algae collected during 1973∼1975 along the coasts of Korea. Among the metals detected by the atomic absorption spectrometer, Mg content is variable in 2.09∼13.84mg/g-dry on an average and 5.31mg/g-dry in a mean of green, brown and red algae, whereas Fe is 0.148∼2.343 and 0.747mg/g-dry; Mn 0.015∼0.191 and 0.063mg/g-dry; Zn 0.007∼0.082 and 0.030 mg/g-dry; Cu 0.005∼0.054 and 0.017mg/g-dry; Pb 0.0017∼0.082 and 0.0043mg/g-dry Co 0.0009∼0.0024 and 0.0016mg/g-dry; Cd 0.0002∼0.0034 and 0.0011mg/g-dry, and Cr is 0.0007∼0.0074 and 0.0021mg/g-dry, both on an average and in a mean respectively. The trace metal contents in the seaweeds investigated are variable according to species, collecting seasons, places and kinds of metal It is interesting that in Sargassum thunbergii some metal contents such as Fe, Mn, and Zn are specially high in September1974 through the year investigated.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.3
• /
• pp.125-128
• /
• 1997

The most effective cytokinin source for adventitious shoot regeneration of in vitro grown leaves from 'Gala' apple was BA with the concentration of 4.0 mg/L, while auxin source was IAA, IBA and NAA with the concentration of 0.1 mg/L, respectively. As the result of combinational treatment of BA and NAA, 6.0 or 8.0 mg/L BA with 0.5 mg/L NAA was effective for adventitious shoot regeneration from leaf tissues of 'Gala', 0.1 mg/L NAA + 8.0 mg/L BA and 1.0mg/L NAA + 8.0 mg/L BA for internode, and 0.1 mg/L NAA + 4.0 mg/L BA for petiole.

• Korean Journal of Plant Resources
• /
• v.34 no.6
• /
• pp.566-574
• /
• 2021

This research was carried out to investigate the correlation between soil chemical properties and bioactive compounds of Acer tegmentosum Maxim. The methods of determining bioactive compounds were determined by high performance liquid chromatography, that contained (-)-gallocatechin (0.04±0.01 ~ 0.43±0.28%), salidroside (0.90±0.06 ~ 3.86±0.59%), tyrosol (0.03±0.00 ~ 0.43±0.00%), (-)-catechin (0.05±0.01 ~ 0.37±0.14%), 6'-O-galloylsalidroside (0.02± 0.01 ~ 0.31±0.06%), (-)-epicatechin-gallate (0.01±0.00 ~ 0.04±0.01%). The soil chemical properties analysis such as soil pH, electric conductivity (EC), organic matter (OM), total nitrogen (TN), available phosphate (Avail. P₂O₅), exchangeable cation and cation exchange capacity (CEC) were performed following the standard manual. The correlation analysis between soil chemical properties and bioactive compounds of A. tegmentosum, soil pH, available phosphate and exchangeable cation (Ca²⁺ and Mg²⁺) were negatively correlated with content of salidroside. On the other hand, soil exchangeable cation (Na⁺) showed positive correlation with content of salidroside. The results of this study was able to investigate the correlation between soil chemical properties and bioactive compounds of A. tegmentosum.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.356-361
• /
• 2015

$Cd_{0.5}Zn_{0.5}S/ZnO$ composite photocatalysts were synthesized using the precipitation method and characterized by XRD, UV-vis DRS, PL and FE-SEM. Photocatalytic activities of the materials were evaluated by measuring the degradation of rhodamine B under visible light irradiation. Contrary to ZnO, $Cd_{0.5}Zn_{0.5}S/ZnO$ materials absorb visible light as well as UV and their absorption intensities in visible region increased with increasing the $Cd_{0.5}Zn_{0.5}S$ amount. The increment in the $Cd_{0.5}Zn_{0.5}S$ content in $Cd_{0.5}Zn_{0.5}S/ZnO$ also leads to reducing the particle size and consequently increasing the specific surface area. $Cd_{0.5}Zn_{0.5}S/ZnO$ materials with the larger $Cd_{0.5}Zn_{0.5}S$ content showed the higher activity in the photocatalytic degradation of rhodamine B under visible light irradiation. Therefore, the heterojunction effect between $Cd_{0.5}Zn_{0.5}S$ and ZnO as well as the adsorption capacity seems to give important contributions to the photocatalytic activity of the $Cd_{0.5}Zn_{0.5}S/ZnO$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.183-191
• /
• 2005

This study is designed to compare the performance of established samplers (personal air sampler and MiniVOL portable air sampler) commonly used in the air environment or work environment with that of the sampler made by remodeling the air bubble generator for aquarium fishes. Sampling method used in this study is the filter collection method for PM10 and total suspended particles (TSP), the liquid collection method for sulfur dioxide ($SO_2$) and nitrogen dioxide ($NO_2$), and the solid collection method for toluene, respectively. There is not a significant difference in the average concentration of TSP between the Gilian personal air sampler (1st, $0.316{\pm}0.095$; 2nd $0.191{\pm}0.090$; 3rd, $0.185{\pm}0.073mg/m^3$) and the remodeled sampler (1st, $0.317{\pm}0.106$, 2nd $0.201{\pm}0.050$; 3rd $0.189{\pm}0.081mg/m^3$). There are also not significant differences in the average concentration of PM10 among the Gilian personal air sampler ($0.058{\pm}0.006mg/m^3$), the remodeled sampler ($0.052{\pm}0.008mg/m^3$) and the MiniVOL portable air sampler ($0.054{\pm}0.007mg/m^3$). The average concentration of the SO2 by the established sampler and the remodeled one is $3.79{\pm}0.21ppb$ and $3.45{\pm}0.15ppb$, respectively. In addition, there are not sigmficant differences in the average concentration of the NO2 between the Gilian personal air sampler (1st, $0.325{\pm}0.068$; 2nd $0.341{\pm}0.206$; 3rd, $2.971{\pm}0.078{\mu}g/m^3$) and the remodeled sampler (1st, $0.300{\pm}0.062$; 2nd $0.332{\pm}0.144$, 3rd, $2.968{\pm}0.085{\mu}g/m^3$). There are not significant differences in the average concentration of toluene between the Gilian personal air sampler (1st, $0.499{\pm}0.072$; 2nd $0.598{\pm}0.112$; 3rd $2.284{\pm}0.077{\mu}g/m^3$) and the remodeled sampler (1st, $0.463{\pm}0.133$; 2nd $0.603{\pm}0.082$; 3rd $2.353{\pm}0.115{\mu}g/m^3$). From these results, we can conclude that the performance of the remodeled sampler is not different from that of established samplers. There is possibility that the remodeled sampler can be used as a alternative device for Gilian personal air sampler in area and personal air sampling.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.199-204
• /
• 2004

Height has become one of the most important factors to determine the pulmonary function test index, and there is a high correlation between them, so that they have been utilized for evaluating pulmonary function test predictive value or nomogram. Therefore, we have tried to find out that difference and if there is any correlation and linear relationship between height and forced expiratory flow curve. There were a total of 163 subjects, male 93 and female 70. This study was done at the Department of Pulmonary Function Test of Jeon-Ju Presbyterian Hospital and we measured the index at the forced expiratory flow curve of FVC, $FEV_{1.0}$, $FEV_{1.0}$/FVC, $FEF_{25-75%}$, and $FEF_{200-1200m{\ell}}$. When we subjected the group of height more than 160cm, there were gradual increments at FVC(p<0.001), $FEV_{1.0}$(p<0.001), $FEF_{25-75%}$(p<0.05) and $FEF_{200-1200m{\ell}}$(p<0.001), but no changes at $FEV_{1.0}$/FVC in terms of forced expiratory flow curve index. We have analyzed the relationship between height and forced expiratory flow curve, there was a close relationship at FVC(r=0.670, p<0.01), $FEV_{1.0}$(r=0.491, p<0.01), $FEF_{25-75%}$ (r=0.175, p<0.05) and $FEF_{200-1200m{\ell}}$(r=0.370, p<0.01) but there was reciprocal relationship at $FEV_{1.0}$/FVC(r=-0.215, p<0.01). We have tried simple regression analysis to see if height affects forced expiratory flow curve index as a sector, and the result was $FVC(\ell)=0.0642{\times}height(cm)-7.2978$(p<0.01, $R^2=0.449$), $FEV_{1.0}(\ell)=0.0407{\times}height(cm)-4.2774$ (p<0.01, $R^2=0.2411$), $FEV_{1.0}/FVC(%)=-0.2892{\times}height(cm)+121.44$(p<0.01, $R^2=0.0464$), $FEF_{25-75%}(\ell/sec)=0.0176{\times}height(cm)-0.7876$(p<0.05, $R^2=0.0237$), $FEF_{200-1200m{\ell}}(\ell/sec)=0.0967{\times}height(cm)-11.037$(p<0.01, $R^2=0.1214$) this was approved statistically. According to this study, if height is taller than average, forced expiratory flow curve index were increased, there was a close relationship between height and forced expiratory flow curve, and there was a linear relationship as sector between height and forced expiratory flow curve index. Therefore, researches that study other factors such as sex, age, weight, body surface area, and obesity indexes other than height should be done to see if there are any further relationships.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.1-5
• /
• 2012

$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ hollow fiber with o.d. 1.02 mm and i.d. 0.437 mm were fabricated by a phase-inversion spinning technique.The starting $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ precursor was synthesized by the polymerized complex method and then calcined at $900^{\circ}C$. As-prepared powder was dispersed in a polymer solution, and extruded as form of hollow fiber through a spinneret. Finallydense $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ hollow fiber membrane was obtained by sintering for 2 h at $1,080^{\circ}C$ for the application of oxygen separation. In addition, despite a very thin membrane with 0.58 mm, the BSCF hollow fiber membrane possessed a proper mechanical strength of 602.5 MPa.