• Analytical Science and Technology
• /
• v.14 no.4
• /
• pp.1075-1081
• /
• 2001

Instrumental Neutron Activation Analysis as a representative method of nuclear analytical technique, has advantages of non-destructive, simultaneous multi-element analysis with the characteristics of absolute measurement method. Up to date, $k_0$-quantitative method which is accurate, convenient and user-friendly, has been generalized world-widely. In this study, it is intented to introduce the general concept of $k_0$-method and to measure $k_0$-parameters for the future implementation to our NAA system. For this objectives, the definition of relevant factors for the quantitative analysis and the equation for the experimental determination of parameters such as $Q_0$(${\alpha}$) and f were summarized. Furthermore, a foundation for the $k_0$-standardization method was prepared through the measurement of ${\alpha}$ and f-value which depend on the specific character of irradiation hole at NAA#1-hole of HANARO research reactor.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.191-195
• /
• 2008

최근 데이터 방송은 새로운 콘텐츠의 부재로 어려움을 겪고 있지만 사용자 중심의 서비스와 플랫폼을 지향하는 웹 2.0의 개념과 기술의 도입을 통해 콘텐츠 활성화에 기여할 것으로 보인다. 그에 대한 기대와 요구가 있으나 구체적인 구현 사례는 존재하지 않으므로 이에 본 논문에서는 웹 2.0으로 각광받고 있는 RSS를 통해 웹에서 지속적으로 업데이트가 이루어지는 최신 정보를 별도의 수집과정 없이 데이터 방송서비스를 생성하는 시스템을 개발했다. 지상파 DMB 데이터 방송의 경우 실시간으로 업데이트가 이루어지는 콘텐츠의 경우 지속적인 반영이 어렵지만 RSS를 통해 콘텐츠를 생성함으로써 저작 단계 및 시간을 줄여 보다 웹의 다양한 내용의 최신 정보를 사용자에게 제공할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.49-60
• /
• 1991

Fatigue behavior of carbon fiber reinforced polyimide composite materials was studied experimentally and analytically. The physical variables, such as cyclic displacements and hysteresis loop energy were observed during fatigue tests. Fatigue life of the investigated [0/90]$_{2S}$ laminates was predicted by H'||'&'||'H models which was proposed based on the fatigue modulus and resultant strain. The predicted fatigue life by H'||'&'||'H curves was reasonably close to the experimental data. Fractography study shows that fatigue failure mechanism of [0/90]$_{2S}$ laminated composite materials involves failure break, matrix tearing and fiber-matrix debonding as well as delamination of layers.

• Journal of Korean Library and Information Science Society
• /
• v.39 no.2
• /
• pp.169-186
• /
• 2008

Social Network has been known as friendship basis human relation service in online network. But a broad sense of Social Network can be explained as a mechanism which makes web evolve to information-ecosystem by human relation and network data which has been generated by the mass of people's cooperation and interchange. Social Network has been expanding their domain from friendship basis relation service to broad social relationship focus of matter of concern. It has been applied to diverse domain. Library community begins to take an interest in Social Network concept to apply user's interchange for information. This paper considers the concept of Social network and it's appliance to a library service. For the more, suggest basic element for vitalizing library user's Social network.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.5
• /
• pp.61-72
• /
• 2022

Web 3.0 is also called the "next-generation Internet" and is a new concept that started in 2018 and is attracting attention as the beginning of the "distributed Internet era". As Web 3.0 became mainstream, non-fungible tokens (NFTs) serving as content as services were distributed, and companies started to introduce NFTs in their marketing campaigns. This is because NFTs can be used to promote brands to new consumers. In this study, using Japan's 「HARTi」 NFT Art as an example, we investigate a new method using urban infrastructure and spaces, not NFTs that exist only in the Japanese art market and online. By analyzing social issues following the introduction of a new digital marketing method based on NFT Art, we will discuss issues and countermeasures in the domestic NFT Art market and present a positive outlook.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.533-541
• /
• 2015

We investigate the Japan's Master Plan of Comprehensive Sewerage System (JMPS) and Lake Biwa basin sewerage and suggest future development direction of the Watershed Sewerage System Maintenance Plan in Korea enforced on February 2, 2013. The JMPS is designed for compliance with the environmental standard for water quality under the Environmental Policy Act. The effluent standards applied in the master plan of Lake Biwa's Sewerage Plan for the Lake Biwa is tougher than the national standards. Therefore the Lake Biwa Baisn Sewerage System was the first in Japan to adopt facilities that perform advanced treatment for nitrogen and phosphorus removal. BOD, SS, T-N and T-P concentrations of discharge water of sewage are 0.9, 0.6, 5.5, 0.06 mg/L, respectively. Especially removal efficiency for BOD is 99.5 percent. It is necessary to study the diversification of the evaluation criteria, cost minimization approach, subsidy system improvement, economic concept of discharge load adjustment system and establishment of basin sewerage concept for the development of the basin sewerage plan in Korea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.974-984
• /
• 2000

A CMOS voltage driver circuit for voltage down converter is proposed. An adaptive biasing technique is used to enhance load regulation characteristics. The proposed driver circuit uses the NMOS transistor as a driving transistor, so it does not suffer from large Miller capacitances which is one of the problems with conventional PMOS driving transistor, and hence achieves good phase margin and stable frequency response. No additional complex circuit for frequency compensation such as compensation capacitor is required in this implementation. For the same current capability, the size of NMOS transistor in driver circuit is smaller than that of PMOS counterpart. So the smaller die area can be achieved. The circuits is implemented using a 0.8 ${\mu}{\textrm}{m}$ CMOS process and has a die area of 150 ${\mu}{\textrm}{m}$ x 360 ${\mu}{\textrm}{m}$. Proposed circuit has a quiescent power of 60 . In the current driving range from 100 $mutextrm{A}$ to 50 ㎃, load regulation of 5.6 ㎷ is measured.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.240-245
• /
• 1995

제어이론의 역사적 발전사를 고찰해보면 1930년대부터 1960년대까지를 고전 제어(classical control) 시대로 분류되고 이때 주로 사용되었던 용어들은 주파수역(frequency domain)에서 사용된 개념인 극점(pole), 영점(zero), Nyquist, 근궤적(root-Locus) 선도(plot)등으로 대표된다. 그 다음단계인 현대 제어(modern control) 시대 (1960년대-1980년대)때는 새로운 개념들이 도입 되었는데 시간역(time domain)에서 사용되는 상태공간(state-space) 모델, 가제어성(controllability), 가관측성(observability), Kalman 필터, LQG 제어 등이다. 1980년대부터 현재까지를 강인제어(robust control) 시대로 분류하는데 이것의 특징들은 극점이나 영점 대신 상태공간 모델을 사용하여 주파수역에서 정의되는 개념들인 H$_{\infty}$ 합성법, .$\mu$ 해석법, LQG/LTR 및 QFT, Lyapunov 등으로 대표된다. 현대제어시대때는 제어기 K는 공칭 플랜트 모델 G$_{0}$를 기준으로 설계되었으나 실제로 공칭 플랜트 모델은 실제 플랜트와 항상 같을 수가 없었다. 따라서 실제 플랜트 G는 G=G$_{0}$ + .DELTA.G로 표현되며 여기서 .DELTA.G는 플랜트 불 확실성(plant uncertainty), 즉 실제 플랜트와 공칭 플랜트의 차이를 나타낸 다. 이 플랜트 불확실성은 제어기가 실제 응용되어 사용되었을 때 제대로 작동하지 않는 주요 이유중에 하나이다. 이와 같은 상황에서 안정도 강인성 (stability robustness) 및 성능 강인성(performance rosubtness)의 보장은 상 당히 중요한 문제로 대두되었으며 주어진 플랜트 불확실성하에서 이러한 강이성들이 보장되는 제어이론들 중 H$_{\infty}$ 제어이론이 많이 연구/응용 되고 있다. 특히 공칭 플랜트 모델과 함께 사용되는 플랜트 모델과 함께 사용되는 플랜트 불확실성 모델은 직접적으로 성능 및 안정도에 영향을 미치므로 주의 깊게 선정해야 한다.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.229-234
• /
• 2022

The non-destructive method of easily evaluating concrete strength through the concept of maturity has been verified by many researchers. The current work introduced such a concept in concrete strength assessment that involved 843 variables and specific values that 11 papers used in experiments, including constant temperatures (5, 10, 20, 30, 40, 50℃) with a W/B range of 18 to 70% and different curing ages (0.5 to 182 days). The classification of concrete as being of normal-strength concrete (40MPa or less), high-strength concrete (40~70MPa), and Super high-strength concrete (70MPa or more) enabled this study to identify the relationship between maturity and concrete strength using the most convenient and easily applicable maturity model in the construction field. A regression formula of lowest guaranteed concrete strength on the basis of maturity was presented.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2009.05a
• /
• pp.164-172
• /
• 2009

본 연구는 국내 종합물류기업에 있어 SaaS(Software as a Service) 방식의 로지스틱스 정보시스템의 도입과 활용에 대한 시사점을 제공하는데 목적이 있다. 연구의 목적을 달성하기 위하여 국내 대표적인 종합물류기업인 한진택배, 현대택배, 대한통운, CJ-GLS의 물류정보시스템 현황을 살펴보았으며, SaaS에 대한 개념 및 공급업체 현황 국내 물류기업 활용 현황 등에 대하여 살펴보았다.