• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.671-680
• /
• 2006

As a mathematical technique with which we can find the minimum duration time needed to fire all the transitions at least once and coming back to the initial marking in a timed net, the minimum cycle time method has been widely used in computer system analysis. A timed net is a modified version of a Petri net where a transition is associated with a delay time. A delay time used in a timed net is a constant even though the duration time associated with an event in the world is a stochastic number in general. In the consequence, the result of minimum cycle time analysis is not realistic. Therefore, we propose ‘Stochastic Timed Net' where a transition can be associated with a stochastic number and introduce a minimum cycle time analysis method for ‘Stochastic Timed Net’ As an example of the application of ‘Stochastic Timed Net’, we introduce a ‘Stochastic Timed Net' model of a Location Based Service Providing Multimedia System and the result of minimum cycle time analysis of it. Whereas the typical form of the result of the existing minimum cycle time analysis is 'It takes at least 10 time units', the typical form of the result of minimum cycle time analysis of a ‘Stochastic Timed Net' is in the probability form such as "The probability of the events in which it finishes its job within 10 time units is 85%."

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.196-203
• /
• 2022

Purpose: This study aimed to evaluate the accuracy and clinical usability of an identification model using deep learning for 79 dental implant types. Materials and Methods: A total of 45396 implant fixture images were collected through panoramic radiographs of patients who received implant treatment from 2001 to 2020 at 30 dental clinics. The collected implant images were 79 types from 18 manufacturers. EfficientNet and Meta Pseudo Labels algorithms were used. For EfficientNet, EfficientNet-B0 and EfficientNet-B4 were used as submodels. For Meta Pseudo Labels, two models were applied according to the widen factor. Top 1 accuracy was measured for EfficientNet and top 1 and top 5 accuracy for Meta Pseudo Labels were measured. Results: EfficientNet-B0 and EfficientNet-B4 showed top 1 accuracy of 89.4. Meta Pseudo Labels 1 showed top 1 accuracy of 87.96, and Meta pseudo labels 2 with increased widen factor showed 88.35. In Top5 Accuracy, the score of Meta Pseudo Labels 1 was 97.90, which was 0.11% higher than 97.79 of Meta Pseudo Labels 2. Conclusion: All four deep learning algorithms used for implant identification in this study showed close to 90% accuracy. In order to increase the clinical applicability of deep learning for implant identification, it will be necessary to collect a wider amount of data and develop a fine-tuned algorithm for implant identification.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.12
• /
• pp.12-20
• /
• 1993

In a conventional adaptive echo canceller, an ADF(Adaptive Digital Filter) with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to compute the coefficients, and NET detector using energy comparison method prevents the ADF to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yields more accurate detection of the start point of the NET signal.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.3
• /
• pp.277-283
• /
• 1999

For the purpose of leading horse mackerel Trachurus japonicus schools, mackerel Scomber japonicus schools and arrow squid Todarodes pacificus schools, which migrate to the Cheju coast and are caught by the set-net, to the set-net by attracting lamps, we made five attracting lamps and took a practical experiment in the Gwiduk and Dongbuk set-net fishing ground. In the set-net with two bag-nets, we compared the amount of catch of both bag-nets by the means of switching on and off the each attracting lamps in order, switching off the attracting lamps in order which had been switched on and moving an attracting lamp.In the bag-net with an attracting lamp, horse mackerel, mackerel and arrow squid were caught the most, on the other hand, yellow tail Seriola quinqueradiata, striped mullet Mugil cephalus were caught in large quantities in the bag-net without attracting lamp. File fish Stephanolepis cirrhifer, Dusky spinefoot Siganus fuscescens were caught evenly in both bag-nets regardless of an attracting lamp.This result indicates that the amount of horse mackerel, mackerel, arrow squid can be increased by the use of attracting lamps in the set-net fishing method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.23-28
• /
• 1992

The purpose of this paper is to develop a new adaptive echo canceller improving convergence speed and near-end-talker detection performance of the conventional echo canceller. In a conventional adaptive echo canceller, an adaptive digital filter with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to cote the coefficients, and NET detector using energy comparison method prevents the adaptive digital filter to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF(Adaptive Digital Filter) output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yield more accurate detection of the start point of the NET signal.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.2
• /
• pp.7-15
• /
• 1986

In order to investigate the performance for the mackerel purse seine of one boat purse seiner using in the sea area of Cheju Island, a model net is made of the scale of 1/400 of its full scale, and model test on the shape of net and the tension of purse line is carried out in the stagnant water channel of the circulating water tank. Designing and testing for the model net are based on the Tauti's law. The obtained results are as follows; 1. The sinking rate of net is maximized the value of 6.40 m/min from 5 to 10 minutes after shooting net, and the mean value is 6.13 m/min. 2. The enclosed area formed with the float line after pursing operation is 76-84% of the area which is formed immediately after the shooting operation. At that time, purse seine is pulled inward the circle of surrounding net about 26.5% of the diameter. 3. In operating, when longitudinal section area of the central part of the net is maximized, the split area of both the wing-ends is 31-32% of the former. 4. When the time for the completing of pursing is 20 minutes, the maximum tension of the purse line is about 10.2 tons.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.3
• /
• pp.127-133
• /
• 2006

An estimation of the headline height of a bottom trammel net set across under uniform current was achieved numerically from a differential equations describing the forces of the net and compared with the measured value in a flume tank experiment. The analysis on the shape of the bottom trammel net with the headline free was based on the equilibrium equation of the bottom gill net which was modified and slack of the trammel net was varied with net depth as shown in the tank experiment. The differential equations were solved by a forth-order Runge-Kutta method. The estimated headline heights with varied slack was found to be closer than that with constant slack when compared with the actual values.

• Language and Information
• /
• v.12 no.1
• /
• pp.27-65
• /
• 2008

This paper presents a set of methodologies for aligning hypernym-hyponym noun pairs between Korean and English, based on the EuroWordNet approach. Following the methods conducted in EuroWordNet, our approach makes extensive use of WordNet in four steps of the building process: 1) Monolingual dictionaries have been used to extract proper hypernym-hyponym noun pairs, 2) bilingual dictionary has converted the extracted pairs, 3) Word Net has been used as a backbone of alignment criteria, and 4) WordNet has been used to select the most similar pair among the candidates. The importance of this study lies not only on enriching semantic links between two languages, but also on integrating lexical resources based on a language specific and dependent structure. Our approaches are aimed at building an accurate and detailed lexical resource with proper measures rather than at fast development of generic one using NLP technique.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.11a
• /
• pp.81-83
• /
• 2005

The Plant Signaling Network Research Center (SigNet) is a government-funded (by Korea's Ministry of Science and Technology (MOST)/ Korea Science and Engineering Foundation (KOSEF)) research center established at the School of Life Sciences and Biotechnology of Korea University in 2003. The SigNet conducts plant biological studies, especially in the field of developmental and defense biology. The research purpose of SigNet is dissection and analysis of plant development and defense signaling network through multiscientific approaches. Knowledge acquired from SigNet research scientists will provide new integrated view of understanding and potential application of plant development and defense mechanism. The other important mission of the SigNet is nurturing Center of Excellence for future outstanding research scientists of Korea. The SigNet will continue to expend every effort to achieve the goals for the future. Through passionate research endeavor of each laboratory and partnerships within inside and outside laboratories, we will continue to develop world-leading plant research group and to educate new generations of innovative researchers. As the SigNet looks toward the future, the SigNet will try to achieve its mission of research, education and service to the community. And the defense response research of our lab will be presented at later part.

• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.51-60
• /
• 2012

In this paper, we provide the analysis of device model and method between device models for compatible M&S V&V of the NetSPIN. First of all, we analysis features, structure, and classification of the NetSPIN. The second, as a part of reliable V&V process, we analysis network system modeling process, correlation between device modeling process for M&S of the NetSPIN. The third, we suggest making a kind of pool of reference model and module of devices for the increase factor of reuse between device model. We also, at the point view of M&S V&V, conclude that there is the validity of the fidelity in device modeling process. Through the analysis of the NetSPIN device model and suggestion of the method for higher compatibility between device modes, the development process of device model be clearly understood. Also we present the effective method of the development for reliable device mode as the point of V&V.