• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.123-129
• /
• 2006

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is desirable that the fatigue life is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A. Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type bellows using the finite element analysis. The design factors, mountain height, length, thickness, and the number of convolutions are considered and the proper values are chosen for the simulation. The results shaw that as the number of convolutions reduces, the volume decreases while the stress increases. However, as the number of convolutions increases, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the mass and stress are decreasing at a certain lower value region. Also, we investigated shape optimization with considering maximum stress distribution tendency.

• Journal of Environmental Science International
• /
• v.20 no.4
• /
• pp.465-482
• /
• 2011

To preserve atmospheric environment of urban areas, it needs to create urban space considering air pollution sources and natural and geographical properties such as wind circulation. According to this study could examine climate and environmental characteristics of Daegu and accordingly suggest a climate map in urban environment and an "advice map" in urban planning. The urban area(area paved with asphalt and concrete) of Daegu has increased by more than five times since 1960. In addition, the analysis of thermal environment through satellite data shows that the surface temperature between a place paved with artificial structures and a farmland shows $10{\sim}20^{\circ}C$ difference during the daytime in the summer. Regarding the parks inhibiting the heat island of a city have the small area of trees, and the road paved with concrete is wide so that they hardly serve as the source of heat absorption. As Apsan is located to the south of Daegu and Palgonsan to the north and Daegu has east high west low type, mountain wind from mountains in the south and north passes a city and delivers heat and air pollutions at night. In the west of Daegue, there is the poorest environment and industrial facilities and environmental basic facilities are mostly located, so large residential complexes that are being built around the industrial facilities as if they set up a folding screen and therefore the poor environment is increasingly worse.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.39-47
• /
• 2016

The houses are formed in the lower part of the mountain slope face in most agricultural areas of Korea, and old residents accounting for a large portion of the agricultural populations cannot respond to the evacuation quickly when the landslide happens, and the possibility the life damage occurs is high. Therefore, it is urgent to arrange the measure on this. This study is intended to develop the personal disaster evacuation apparatus that can be installed in the house to minimize the life damage by the landslide and to develop the self-initiative evacuation apparatus. This study suggested the load applicable to the personal disaster evacuation apparatus by quantitatively analyzing the effect of the load of rockslides and avalanches caused by the landslide on the structure. Also, the material property of materials was calculated through the tension and bending intensity test after making the specimen of glass fiber reinforced plastic (GFRP) member. The load weight and material property drawn from this study can be used as the basic material for the stability analysis of the personal disaster evacuation apparatus.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.1
• /
• pp.19-33
• /
• 1997

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorological processes. In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification process through observation is emphasized.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.47-57
• /
• 2011

This study monitored forest plant species vulnerable to climate change in Jiri Mountain, one of Korea's representative alpine regions, in order to securely preserve plant genetic resources susceptible to climate change and to utilize the results as basic data for bioclimatology prediction and management on a long-term basis. A majority of indicator plants tended to blossom one week to one month later in 2010 than in 2009. As with the blooming dates, the falling dates of blossoms became later in most species, with the exception for Weigela florida and Oplopanax elatus. Leaf bursting as well fell on later dates in a majority of species excluding Carpinus laxiflora and Cupressus sempervirens, displaying the most obvious differences among the data of analysis of the 2009-2010 physiological cycle changes. It is believed that was due to the fact that temperatures in February, March and April, which affect plants' blossoming and leaf bursting, were lower in 2010 than in 2009 and that cold temperatures in the winter lasted for a longer period in 2010 than in 2009. The dates of leaves being changed to red were similar in 2009 and 2010 by being or later or earlier by several weeks in 2010 than in 2009 without any regularity. Most species' leaves began to fall at similar dates in 2009 and 2010 or at later dates by one to two weeks in 2010 than in 2009. The temperature differences in late 2009 and late 2010 were not so large, resulting in similar dates of falling leaves, and gaps in several indicator plants' physiological cycles without any regularity can be attributed to each individual plant's physiological and environmental characteristics.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.393-402
• /
• 2021

The first TBM introduced in Korea was the gripper TBM, which was applied to the Gudeok Waterway Tunnel in 1985. In the initial stage of the introduction of the gripper TBM, many applications were mainly focused on waterway tunnels (Tunnel Mechanized Construction Design, 2008). Currently, the construction range of gripper TBM in Korea is widely applied to not only waterway tunnels, but also subways, railway tunnels, and TBM+NATM expansion. Overseas, gripper TBM is generally applied, and even when NATM tunnel is applied, it is applied as an exploration tunnel because of the excellent advance rate of gripper TBM and used as an evacuation tunnel after completion. Due to the fast excavation speed, the application of the gripper TBM in the rock section of weathered rock or higher can minimize the environmental and civil complaints caused by creating a large number of work areas when planning long tunnels or mountain tunnels. In this study, the work process of the general gripper TBM was analyzed by analyzing the construction cycle and the gripper TBM with a diameter of 2.6~5.0 m, which was applied the most in Korea. Downtime was investigated and analyzed.

• Korean Journal of Environment and Ecology
• /
• v.35 no.5
• /
• pp.490-502
• /
• 2021

This study was conducted to analyze the current status of fish fauna and characteristics of the fish community according to the habitat of Woraksan National Park, Korea. The spatially balanced sampling selected 20 stations from major streams of Woraksan National Park, and three surveys were conducted in each season. The physical environments of the habitat were mostly mountain streams (Aa), with large stones and gravels scattered over the stream. The average altitude of the habitat was 304.4 m, and the average depth of water was 40.3 cm, being less than 1 m in most cases, and the river water level was distributed from 3rd to 5th streams. The principal component analysis of the physical environmental factors by habitat showed that the substrate properties differed according to the altitude. The survey identified a total of 2,183 individuals in 16 species belonging to 7 families. The dominant species was Zacco koreanus(86.2%), and the subdominant species was Rhynchocypris oxycephalus(3.8%). Pseudopungtungia tenuicorpa, classified as the endangered wildlife II, was the first endangered legally protected species found in this survey. Analysis of the rank abundance curve model in the fish community showed the Zipf model at 9 out of 20 points, the Lognormal model in 3 points, and the Preemption model in 4 points. The remaining 4 habitats showed only one species and were not analyzed. The canonical correspondence analysis of 20 stations and fish species was performed to understand the characteristics of the fish community according to environmental factors. The fish communities were divided according to differences in habitat environment by the altitude.

• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.42-53
• /
• 2017

One of the negative ecological effects following road construction is roadkill; animals die on the roads after being struck by vehicles. Roadkills have been a major concern in South Korea due to the large mountain areas in the country and have been mentioned as a causal factor for the decline in wildlife. Although snake roadkills frequently occur, as with mammals, birds, and amphibians, there are not many related studies done on snake roadkills. In this study, we determined snake roadkill patterns in the northeast part of South Korea including most of the Gangwon-do areas and parts of Gyeonggi-do, Chungcheongbuk-do, and Gyeongsangbuk-do by analyzing the snake roadkills found between May 2007 and Aug 2012. We identified a total of 155 roadkilled snakes from 10 different species. Red-sided water snake (Rhabdophis tigrinus), Red-tongue viper snake (Gloydius ussuriensis), Cat snake (Elaphe dione), Red-banded snake (Dinodon rufozonatus), and Viper snake (Gloydius brevicaudus) accounted for more than 90% of the total cases. It was found that more active forager snakes were killed than sit-and-wait foragers, more male snakes were killed than female snakes, and more adult snakes were killed than subadult snakes. The snake roadkill frequency was the highest in September between the altitudes of 200 and 400 m, and on roads between either a mountain and a body of water or between a mountain and a crop field. Our results are expected to enhance the understanding of snake roadkills in general and to determine the areas, specific sites and species for planning projects for snake roadkill reduction in the northeast of South Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.1 s.108
• /
• pp.93-108
• /
• 2005

Fresh Kills is the largest landfill in the world located in the west side of Staten Island, New York. The landfill served as a storage area for New York City's trash for more than 50 years. After years of civilian and political pressure, state and local legislation decided its closure of landfill operation in Fresh Kills in March 2001. Soon after, Department of City Planning announced a Fresh Kills international design com-petition: 'Landfill to Landscape'. The winning entry was promised to be outline for the redevelopment of the 2,200 acre site which the size of three times Central Park. Forty-eight teams representing more than 200 offices from around world submitted proposals, from which six finalists that mostly led by landscape architects were selected. In December 2001, a jury of architects, landscape architects and city officials unanimously selected Field Operations as the winner. The plan, named Lifescape, visualizes the gradual 20-year transformation of the whole Staten Island into a 'natural lifestyle island' recognizing that Staten Island is home to coastal wetlands that shelter one of the most diverse ecosystems in the New York metropolitan area. It suggested that an ecologically reconstituted Fresh Kills could become the center of integrated parks and greenways system on the island otherwise fragmented. The project will be one of the largest and most ambitious undertakings in the metropolis in years developing a complex web of habitats and parklands on top of mountain of trash. This study tries to achieve two goals: One is to provide general explanations on the project, Lifescape, breaking down to its background, geographical context, design concepts and phased development plan. Another is to introduce the unique and innovative design approaches by Field Operations that are different from a conventional landscape architectural attitude. Since this project was well published through many magazines and newspapers, main focus will be upon aspects that differentiate this project from usual landscape projects. Conceptually Lifescape brought provocative notions on nature/culture relationship and the role of urban park as an active agency rather than just a green rest area. Also this project introduced pioneering graphics like plan collage, diagrammatic plan, phasing diagram and photo montage as vehicles conveying information, imagination and provocation. Witnessing the influence of the project gradually in the field of academic and practice in the States, this study is intended to become a constructive reference to similar landscape projects dealing with large and complex urban context in conjunction with restructure of contemporary city.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.11-18
• /
• 2012

Increasing concern about biodiversity has lead to a rise in demand on the spatial assessment of biological resources such as biodiversity assessment, protected area selection, habitat management and restoration in Korea. The purpose of this study is to create species richness map through data collection and modeling techniques for wildlife habitat assessment. The GAM (Generalized Additive Model) is easy to interpret and shows better relationship between environmental variables and a response variable than an existing overlap analysis and GLM (Generalized Linear Model). The study area delineated by a large watershed contains Jirisan national park, Mt. Baekun and Sumjin river with three kinds of protected areas (a national park, a landscape ecology protected area and an otter protected area). We collected the presence-absence data for wildlife (mammals and birds) using a stratified random sampling based on a land cover in the study area and implemented natural and socio-environmental data affecting wildlife habitats. After doing a habitat use analysis and specifying significant factors for each species, we built habitat suitability models using a presence-absence model and created habitat suitability maps for each species. Biodiversity maps were generated by taxa and all species using habitat suitability maps. Significant factors affecting each species habitat were different according to their habitat selection. Although some species like a water deer or a great tit were distributed at the low elevation, most potential habitats for mammals and birds were found at the edge of a national park boundary or near a forest around the medium elevation of a mountain range. This study will be used for a basis on biodiversity assessment and proected area selection carried out by Ministry of Environment.