• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.43-50
• /
• 2002

In the design of structure, the forces acting on tai structure are key parameter fur noise and vibration control. However, in the complex structure, the forces at the injection point on the structure cannot be measured directly. So, it is necessary to find out Indirect force evaluation method. In this paper, forces have been measured with In-situ vibration responses and system information. And, three existing techniques of indirect force measurement, vita. direct inverse. principal component analysis and regularization have been compared. This paper shows that multi-vibration responses are essential for talc precise estimation of the forces. To check these conditions, rotary compressor is adopted as test sample, because it is very difficult to measure the injection forces from internal excitation to shell. It alas also been obtained that relatively higher force is transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation with curvature shell and plate.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.14-20
• /
• 2001

The mass-spring system with four arms for the force-balance servo accelerometer was designed and fabricated. The response characteristics of a mass-spring system was calculated with the change of arms thickness and seismic mass by the finite element method (FEM). Furthermore, the response characteristics of accelerometer was measured using the change of interference pattern and response voltage value by Michelson interferometer. The response characteristics with changing length and thickness of arm was changed drastically, and changing seismic mass was minor effect for the response characteristics of mass-spring system. The measured resonant frequencies have good agreement with that of numerical analysis within 5％ range.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.200-207
• /
• 2001

The transmission of harmonic vibratory power form a vibrating rigid body into a supporting plate through passive and active isolators is investigated theoretically and experimentally. The theoretical model allows for the transmission of vertical and horizontal harmonic forces and moments about all three coordinate sun. The experiment is to use vibration actuators attached to the intermediate mass of the two-stage mount to minimize the rotational and translational vibration of the intermediate mass. The performance is done by measuring the vibration at the error sensors due to the primary vibration source and measuring the transfer functions from the control sources to the error sensors. Results show that over a frequence range from 1 to 100Hz, transmission into the supporting plate can be reduced substantially by employing in parallel with existing passive isolators, active isolators adjusted to provide appropriate control force amplitudes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.77-80
• /
• 2005

Local probe techniques such as scanning probe microscopy (SPM) or atomic force microscopy (AFM) extended our perception into ultra small world. Specially, the sense of touching was extended by AFM into the micro- and nanoworld and has provided complementary new insights of the microscopic world. In addition, touching objects is an essential step before trying to manipulate things. SPM as a touch sensor not only measure the mechanical properties but also detect different properties such as magnetic, electrical, ionic, thermal, chemical and biophysical properties in nanoscale and even less. Obtaining biophysical measurements, monitoring dynamics and processes together with high-resolution imaging of the biomolecules and cells with rather simpler sample preparation than any other techniques give great attractions to the scientists experimenting with biological samples. Among the many AFM capabilities we will specifically introduce the force plot which is used to measure tip-sample interactions and its application this time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.751-752
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1015-1016
• /
• 2010

• Explosives and Blasting
• /
• v.20 no.1
• /
• pp.61-66
• /
• 2002

화약의 힘을 결정하는 요인은 폭속, 가스량, 폭발열등이 있다. 이중 폭속은 화약의 힘을 결정하는 중요한 요인이다. 이러한 폭속을 결정하는 조건은 화약내 구성성분에 따라서 달라진다. 그러나 동일한 화약조성일 경우 폭발속도는 공기중과 같은 개방상태, 천공 내와 같은 밀폐상태에서 차이가 있을 것이며, 또한 이론상 약경, 장전밀도, 뇌관의 위력, 장전방법 등에 의해 지배를 받는다고 알려져 있다. 이에 본 연구에서는 국내 산업용화약류를 대상으로 상기의 조건들을 달리하여 폭속을 측정하고, 그 결과를 바탕으로 실제 폭약의 폭속에 영향을 미치는 조건을 찾아내고 이러한 조건의 변화에 따라 폭속이 어떻게 변화는 지를 알아보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.211-217
• /
• 2010

It is important to measure the mechanical properties of nanostructures because they are required to determine the lifetime and reliability of nanodevices developed for various fields. In this study, tensile tests for a multi-walled carbon nanotube (MWCNT) and a ZnO nanorod were performed in a scanning electron microscope (SEM). The force sensor was a cantilever type and was mounted in front of a nanomanipulator placed in the chamber. The nanomanipulator was controlled using a joystick and personal computer. The nanostructures dispersed on the cut area of a transmission electron microscope (TEM) grid were gripped with the force sensor by exposing an electron beam in the SEM; the tensile tests were the performed. The in situ tensile loads of the nanostructure were obtained. After the tensile test, the cross-sectional areas of the nanostructures were observed by TEM and SEM. Based on the TEM and SEM results, the elastic modulus of the MWCNT and ZnO nanorod were calculated to be 0.98 TPa and 55.85 GPa, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.42.2-42.2
• /
• 2018

신도시 및 대규모 도시 개발이 진행됨에 따라 안정적이고 효율적인 전력 공급을 위해 다수의 지상 배전함이 설치되고 있으며, 이에 따라 불법 광고물 및 스티커의 부착으로 인한 문제가 발생하고 있다. 이를 해결하기 위하여 여러 기관 및 산업체에서는 부착 방지용 코팅 도료 및 시트에 대하여 다양한 연구개발을 진행하고 있으며, 현장에 적용 된 다수의 제품이 존재한다. 하지만 현재 대부분의 제품들은 약 1년 정도의 시간이 지나면 부착 방지 기능을 상실하며, 도료와 기판 또는 시트와 기판 사이의 박리가 일어나 도시의 미관을 더욱 해치는 결과를 초래하고 있다. 이러한 원인으로는 부착력(Peel resistance, N/cm)을 측정하는 기존의 제시된 방법(KS T 1028, Peel test)으로는 정확한 측정이 어렵기 때문에 제품 선별에 어려움이 있다. 일반 기판의 경우 규격에서 요구하는 각도($90^{\circ}$, $180^{\circ}$)가 잘 유지되어 정밀한 부착력 측정이 가능하지만, 저점착 기능성 코팅소재(Anti-adhesion coating)의 경우 부착 자체가 어렵기 때문에 요구 각도를 유지하기 어려워 정밀한 측정을 할 수 없다. 이러한 문제점들을 해결하고자 압입자(Probe)를 이용한 새로운 평가 장치와 방법(Tack test)을 개발 및 제시하였다. 평가 지표로는 최대 점착력(Adhesive force, N), 최대 점착력일 때 점착제가 늘어난 총 길이(Extension of adhesive, mm), 탈착 에너지(Energy, J)가 있으며, 인가하는 힘(N)이 커질수록, 탈착 속도(Velocity)가 빨라질수록 평가 지표 모두 값이 상승하는 경향성을 보인다. 각 시험방법(Peel test, Tack test)에 대한 테이프류 점착제와 기판과의 결합이 끊어지는(Debonding, 탈착) 메커니즘(Mechanism)은 점착제 기공(Cavity)의 형성, 결합이 끊어지는 힘(Debonding force, N), 힘의 평형(Force balance)로 설명 가능하며, 상호간의 관계성을 도출한다. 이와 같은 평가 지표를 활용하여 저점착 기능성 코팅소재에 대해 정밀한 평가를 하는 것으로, 향후 개발될 다양한 제품에 대한 성능 분별력을 높이고, 현장에 적용 될 제품들의 성능을 끌어 올려 기존에 발생한 다양한 문제점들을 해결 할 수 있다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.226-232
• /
• 1982

The measurements of the jerking force and the tail beat by hooked carp were carried out using a strain gauge at a fish pond from July to August 1981. The maximum jerking force was sustained for a while in the initial state after a carp was hooked, but the jerking force was gradually decreased as a function of the time elapsed until the fish was utterly exhausted, and it converged to the body weight at last. The results are as follows : 1. The maximum jerking force $F_m(g)$ can be expressed with empirical formula : $$F_m=3.23W+105$$ where W (g) is the body weight. 2. Dynamic change of the maximum jerking force $F_n(g)$ by one tail beat with time $t_{n}(-10T/2{\leq}\;t_n{\leq}10T/2)$ can he induced with the equation as follows : $$F_n=(0.27W-6.52)(|t_n|+C)^{-2.10}$$ where the period T (sec) is given by the following equation with the body weight : T=0.000385W+0.193 3. The jerking force at each of the peak points $F_p$ (g) varies with the time elapsed t (sec) as following equation : $$F_{p}=(2.23W+105)e^{-{\beta}t}+W$$. The value of durability index $\beta$ was nearly zero in the initial state and about 1.7 in the exhausted state at last. 4. It was clearly shown that the change of jerking force by hooked carp was closely related to the tail beat from a paired difference T-test.