• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.608-614
• /
• 1999

The counter-diffusion of aromatic compounds such as coronene and tetra-phenylporphine by injection of acetone or tetra-phenylporphine solution was studied on aluminas and silica-alumina used widely as catalysts support. The counter-diffusivity was determined from simulation results by using the counter-diffusion model employing ideal adsorbed solution theory. The counter-diffusivities of aromatic compounds in the catalyst supports were ranged in ${\sim}10^{-15}m^2/sec$ in the desorption process by the injection of excess acetone. In the counter-diffusion process with tetra-phenylporphine solution which have similar concentration with adsorption solution, the counter-diffusivities of coronene were also ${\sim}10^{-15}m^2/sec$, and that of tetra-phenylporphine into pores were determined as ${\sim}10^{-11}m^2/sec$. The counter-diffusivities of coronene desobed from the adsorbent were significantly redyced in comparison with the effective diffusivities when there is counter-diffusion flux. The values mainly depended on the existence of counter-diffusion flux, but not concerned with the species and amount of desorbates.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.403-411
• /
• 1984

Amberlite XAD-7 and XAD-4 resins impregnated with DXHQ (5,7-dihalo-8-hydroxyquinoline) were prepared for the adsorption, separation and recovery of heavy metal ions from aqueous solutions. The characteristics of the impregnated resins, DXHQ (X : Cl, Br, I)-XAD were studied to find out the proper pairs of resin and DXHQ for the adsorption of metal ions. The increasing order of the impregnated amount of DXHQ onto XAD-7 resin was as follows: DCHQ < DBHQ < DIHQ. It was observed from the plot of log $K_d$ vs. pH that the optimum pH range for the adsorption of DIHQ onto XAD-4 resin was from 3.0 to 7.0. The stabilities of the DXHQ-XAD resins were investigated by measuring the amount of DXHQ remained on the XAD resin after shaking the DXHQ-XAD resins in various solutions of pH ranging from 2 to 12 and hydrochloric acid solutions. The impregnated resins were considerably stable in both acidic and neutral solutions. The amount of DIHQ leached from DIHQ-XAD-4 resin by eluting with various HCl solutions (1 ∼ 5M) was negligible, but in the case of XAD-7 resin it increases as the concentration of HCl solution increases. The optimum pH ranges, absorption mole ratio (M : DXHQ) and adsorption capacities (mmol metal per gram of resin) for the adsorption of metal ions onto the DXHQ-XAD resins were determined respectively. The stability of metal ion absorbed by the DXHQ-XAD resins was observed as the following order: M-DCHQ-XAD-7 < M-DBHQ-XAD-7 < M-DIHQ-XAD-7. The adsorbed metal ions were quantitatively recovered by eluting with HCl (0.5 ∼ 5M) and DXHQ-XAD resins could be reused over 5 times without re-impregnation of DXHQ.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.3
• /
• pp.187-195
• /
• 2002

다환방향족탄화수소류 화합물의 증기상-입자상간의 분배평형의 설명을 위해 흔히 입자상의 흡착지점이 균질하고 총흡착면적은 TSP에 비례한다는 가정을 사용하는데 본 연구의 목적은 이러한 가정의 타당성을 평가하는 것이다. 본 연구를 위해 도심에서 6단의 다단계 대기중입자채집기를 사용하여 대기 중의 입자를 포집하였으며 이들 입자에 흡착된 phenanthrene, anthracene, fluoranthene, pyrene을 분석하여 입경별 분포를 측정하였다. 특히 연구기간 중에 황사현상이 일어나 입경분포나 입자의 기원이 매우 다른 경우에 대한 연구가 가능하였다. 주요연구결과로서 우선 야마사키가 제안한 분배평형의 온도 의존식은 제한된 범위에서 사용되어야 한다는 것이 관측되었다. 즉, 황사현상이 일어나는 경우와 같이 입자의 흡착특성과 입경분포가 보통때와 다른 경우에는 log Kp와 l/T의 관계에서 선형성이 상당히 저하되었다. 또한 특히 낮은 온도에서는 입자의 입경분포가 달라지면 전체적인 분배평형이 달라지게 되는 것으로 평가되었으며 입자의 흡착특성도 분배평형의 온도의존성에 결정적인 영향을 줄 수 있는 것으로 나타났다. 따라서 입자의 기원이 다양하거나 입경분포가 달라지면 흡착평형이 바뀌기 때문에 흡착특성의 균질성과 단순한 TSP를 전제로 하는 분배평형의 평가나 예측은 실제 대기조건에서는 정확하지 않을 수가 있으며 제한적인 조건에서 사용되어야 할 것이다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.107-113
• /
• 1986

Laboratory experiments were carried out to investigate the effects of pH, gibbsite, and organic matter on sulfate adsorption by soils. Samples of five soil series (Songjeong, Gopyung, Yeasan, Gyorae, and Namwon), different in physical and chemical properties, were used in this study. The results obtained from sulfate adsorption experiment with sulfate solutions of the concentrations ranging from 50 to 400 ppm were as follows: 1. The adsorption phenomena for five soils were well described by the Freundlich adsorption isotherm over a given range of sulfate concentration. 2. The amounts of sulfate adsorbed and K value of Freundlich adsorption isotherm increased as the initial pH of the suspension decreased. 3. Although the changes in pH of the suspension on the adsorption equilibrium were hardly observed in the soil treated with gibbsite, the sulfate adsorption rates were increased with amount of gibbsite treated. 4. The effects of pH of the suspension on the adsorption rates in the soils treated with gibbsite were remarkable at the level of 0.1% but were little at the level of 1.5%. 5. The adsorption rates of soils, treated with organic matter and incubated for three weeks, were in the order: starch > straw > compost. At the relatively high levels (5 and 10%) of treatments, compost treatment resulted in the sulfate desorption phenomena.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.380-385
• /
• 1988

The urease adsorption on zeolite and the various properties of adsorbed urease were investigated to find out the influence of zeolite on activity and properies of urease. Free urease in solution was adsorbed on zeolite untill the max. adsorption, and the amount of max. adsorption was 11.3mg urease/100mg zeolite at pH 7.0. It is apparent that free urease was adsorbed on the outer surface of zeolite by cation exchange reaction, and more than 70% of urease adsorption was adsorbed within 30 min. The activity of adsorbed urease was decreased by 89.6%, whereas Km value was increased to 34.4mM, which is higher than that of free urease. The optimum pH of adsorbed urease was widened 6.5 to 7.0, compared to that of free urease 7.0. The resistance of urease to protease became weaker by adsorption, however substrate specificity and thermal stability were not affected.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.1
• /
• pp.25-30
• /
• 1996

The adsorption mechanism of Chromium(VI) uptake in silk fibroin fibers was discussed. The adsorption equilbrium of Chromium(VI) is significantly influenced by the initial adsorption rate and it showed 52% of the equilibrium uptake. The Chromium(VI) uptake by silk fibroin in increased with the acidic range of pH, which react upon Chromium(VI) oxidations. The enthalpy change in the Chromium(VI) on the temperatures, $\Delta$H, was found to be 39.7 KJ.mol-1, It means that the Chromium(VI) adsorption proceeds via a certain complex chemical reaction and the Chromium complex was found to be coordinated with carbonyl group of amides from the result of infrared spectra. The chroming of silk fibroin fibers in moderated in the conditions of 5$0^{\circ}C$, pH 2.4, and 3 hours, which prevent from the loss of physical properties. The equilibrium adsorption is attained at 5 X 10-3M of Chromium(VI) solutions.

• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.75-93
• /
• 1995

This study investigates the adsorption capacity of the gibbsite and the clay on the development of admixed liner. The gibbsite is produced as a by-product in the pretreatment process for cleaning and coloring of Alurninurn sash. From the study, following conclusions were obtained: 1) The adsorption of metals such as Cu(II), Cd(II), and Ni(II) and phenol on gibbsite and l:entonite was equilibrated rather quickly(12 ~48 hrs ). 2) The rate and extent of adsorption is a function of surface area the adsorbent having. 3) The Larigmuir isotherm is found to be more suitable than Freundlich isotherm for the adsorption analysis of heavy metals on gibbsite and bentonite. 4) In case of phenol, Freundlich isotherm, whose N value is close to 1, i.e., close to linear isotherm, is more fit to describe the adsorption on gibbsite and bentonite. 5) The amount of metals and phenol adsorbed is found to be in the following order : Adsorbent : $2{\mu}m-Al(OH)_3$ > Mixed Solid > $12{\mu}m-Al(OH)_3$ > Na-Bentonite > $30{\mu}m-Al(OH)_3$

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.266-270
• /
• 1998

The Ag-treated activated carbon was prepared by the impregnation of Ag on the home made activated carbon. We investigated the nitrogen adsorption property, surface structure, and antibacterial activity of the carbon. The BET surface areas of Ag impregnated activated carbon are distributed to $740-1112.2m^2/g$ region. The results of nitrogen adsorption property show that BET surface areas move gradually to lower value with increasing $AgNO_3$ mole concentration. From the SEM results, we observed window blocking effect for micropores of external surface of adsorbent by Ag impregnation. Escherichia coli which is a kind of colon bacillus was used as bacteria for antibacterial test. From these results, we also observed that activity increase gradually to larger range with increasing $AgNO_3$ mole ratio.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.248-251
• /
• 2004

일반적으로 유기오염 물질의 경우 sequestration 또는 aging 현상에 의해 탈착저항성을 띠게 되는 것으로 알려져 있다. 그러나 중금속의 경우 흡/탈착반응은 탈착저항성이 없는 가역적 반응이라는 보고가 있는 반면 홉/탈착 반응은 비가역적이며 탈착저항성이 존재한다는 보고도 있다. 본 연구에서는 해양 연안 퇴적물에 대한 납의 흡/탈착 실험을 통하여 탈착 저항성을 화인하고 연속추출 실험을 수행함으로써 탈착 저항성 부분의 크기를 규명하고자 하였다. 그리고 각기 다른 pH(4, 6)에서 흡착 실험을 수행함으로써 pH에 따른 흡착친화도를 규명하였다. 그 결과 퇴적물에 대한 납의 흡착량은 높은 pH(6)에서 더 많았고, 각 pH 범위에서 납은 탈착저항성을 가지는 것으로 나타났으며, 연속추출결과 Organic Material bound부분에 66% 정도가 흡착되어 있음을 알 수 있었다.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.461-469
• /
• 1994

Trace vanadium was determined by Adsorptive stripping voltammetry with HMDE in PIPES buffer solution. N-Benzoylphenylhydroxylamine was used as a ligand. The calibration curve of vanadium was linear over the range of $10{\sim}70{\mu}g/L$ on accumulation potential of +0.15V and on accumulation time of 10 sec. The various metal ions did not interfere with the determination of vanadium(V) in this case.