• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.98-103
• /
• 2010

A series of fire experiments have been performed to examine the measurement bias of the bare bead thermocouple widely used in fire testing and analyze the measurement bias of bare bead thermocouple comparing with the measured temperature using the aspirated thermocouple. The measured temperature of the bare bead thermocouple was lower than that of the aspirated thermocouple in the hot upper layer while it showed opposite trends in the upper layer. Also, the bare bead thermocouple showed higher measurement bias in the lower layer rather than upper layer in the compartment fire. The maximum relative percentage error of the bare bead thermocouple against the aspirated thermocouple reached 250% in the present study. The present study points out the need of correction process of the measured temperature by bare bead thermocouple for improving the reliability of the fire tests.

• Tunnel and Underground Space
• /
• v.29 no.1
• /
• pp.38-51
• /
• 2019

Barcelona Basic Model (BBM) can describe not only swelling owing to decrease in effective stress, but also wetting-induced swelling due to decrease in suction. And the BBM can also consider increase in cohesion and apparent preconsolidation stress with suction, and decrease in the apparent preconsolidation stress with temperature. Therefore, the BBM is widely used all over the world to predict and to analyze coupled thermo-hydro-mechanical behavior of bentonite which is considered as buffer materials at the engineered barrier system in the high-level radioactive waste disposal system. However, the BBM is not well known in Korea, so this paper introduce the BBM to Korean rock engineers and geotechnical engineers. In this study, Modified Cam Clay (MCC) model is introduced before all, because the BBM was first developed as an extension of the MCC model to unsaturated soil conditions. Then, the thermo-elasto-plastic version of the BBM is described in detail.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.369-370
• /
• 2003

여러 가지 실내공기 오염물질중 라돈은 주로 자연 발생원으로부터 기인하는 물질로써 우리가 원하지 않는 비자발적 위험 요인(unwanted and involuntary risk factor)이며 전체 자연 방사성물질의 노출량에서도 많은 비율을 차지하는 것으로 알려져 있다(환경부, 2002). 라돈은 무색, 무취의 가스로 이를 흡입하는 경우 폐암을 유발하는 것으로 알려져 있다. 토양중 라돈은 지하수로 용해되어 지하수를 섭취하는 경우 노출될 수 있는데, 이로 인한 위해도보다는 실내공기로 인한 흡입 노출시의 위해도가 매우 크고, 이로 인해 실내 공기중 라돈의 위해도가 라돈으로 인한 전체 위해도의 90% 수준에 달하는 것으로 알려져 있다(NAS, 1999; 김순애 등, 2002). (중략)

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.06a
• /
• pp.32-44
• /
• 1990

유압 Vane pump는 carming, rotor, vane에 의하여 둘러싸인 공간체적이 rotor의 회전과 함께 변화하면서 pump 작용을 한다. 즉 공간체적이 증가하는 동안은 유압이 저압으로 되어 흡입구에서 유압유를 흡입하고 vane의 존환점 (vane이 가장 많이 출한 점)을 지나면 공간용적이 감소하여 유압류는 고압으로 될 수 있도록 되어있다. 이때 vane은 관성력과 점성력 그리고 유압류의 압력에 의한 힘으로 vane 선단이 캠링의 내면에 밀착되어 회전하도록 되어있다. 유압 vane pump 베인 선단부의 윤활문제와 관련된 지금까지의 연구로서는 Hibi 등에 의한 압력평형형 베인모터, W.D Beck, T.C Edwards에 의한 베인형 콤푸렛셔 Ujiie 등에 의한 베인형 진공펌프, Ueno 등에 의한 가변용량형 베인펌프의 마찰특성에 관한 연구 및 베인 이간 현상에 관한 실험적 연구가 있다. 그러나 이와 같은 연구들의 베인과 캠링 슬라이딩 부분에 관한 취급들은 베인선단 슬라이딩 부분에 가해지는 변동가중이 불명확했기 때문데, 단순히 슬라이딩 부분의 면적이 작다는 이유로 단성유체 윤활상태일 것이라는 확정을 하였을 뿐, 실제적으로 어느 정도의 윤활 상태를 파악하기 위하여 회전하는 vane의 가학적인 거동을 확실하게 규명하고자 함이 본 연구의 목적이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.833-839
• /
• 2010

Over the past years, many research works have been carried out to investigate the factors which govern the performance of diesel engine. The air pollutant emission from the diesel engine is still a significant environmental concern in many countries. In the present study, new system of smoke reduction of diesel engine is proposed. This new system is using vacuum equipment for capture smoke. To confirm new system experiments were performed at engine dynamometer. As a result of this experiment, the smoke reduction of this system was identified.

• Journal of KSNVE
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2004

균열 현상은 모든 필터에서 발생하였다. 1997년 9월 원심 압축기 B에서 발생한 지나친 진동현상으로 여러 필터 중 한 필터가 부서져 임펠러 흡입부로 빨려 들어갔다. 1997년 10월 기동중에 선회실속 문제가 임펠러에서 발생하였고, 이 원인은 임펠러 eye가 부분적으로 막혔기 때문이었다. 압축기 입구와 출구의 전체 유량과 압력 상태는 정상이었기 때문에 어떠한 서지현상도 anti-surge 시스템에 의해서 감지되지 않았다. 고장상태를 진단함으로써 압축기의 재가동을 방지하여 필터들이 부서졌다는 것을 확인하게 되었다. 이번 기계 점검과정을 통하여 원격진단의 중요성을 확인하였으며, 이에 회사는 원격서비스(remote service) 계약을 체결하여 현재 원격 진단 서비스 점검이 계약 기간에 따라 정기적으로 이루어지고 있다. 이와 같이 기계에 대한 정기적인 점검을 실시하는 목적은 기계의 결함이나 고장문제를 조기에 발견함으로써 중대한 고장으로의 진행을 사전에 예방하거나 또는 최소화하는데 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.298-304
• /
• 1995

유동이 있는 경우 발생하는 소음에 대한 실험적 연구는 풍동과 무향실이 결합된 음향풍동에서 수행될 수 있다. 이러한 음향풍동은 팬, 수축부, 수집부, 확산부 그리고 무향실에 주의해서 설계되어야 하고 특히 각 부분에서 발생할 수 있는 이차소음을 최소화하도록 설계되어야 한다. 최종적으로 소음기와 흡음재를 이용해서 팬소음과 이차소음의 전파를 줄인다. 본 음향풍동은 개방형 흡입식(open suction type)으로 시험부에서 유속 62.8m/s, 난류강도 0.1%이하, 배경소음 50-55dB 이하로 설계되었다. 이러한 조건을 만족시키기 위하여 하니콤과 6장의 스크린이 있는 정체실과, 21:1의 수축비를 갖는 수축부를 이용하여 난류강도를 낮추고, 흡음재와 90도 각도의 모서리 그리고 공명형과 소산형 소음기로 소음의 전파를 줄였다.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.3
• /
• pp.307-312
• /
• 1995

The present study has been carried out to assess the diagnostic usefulness of radioaerosol lung scan in complete bronchial obstruction (n=7) and bronchial narrowing (n=1) of varying causes. $^{99m}Tc$-phytate lung scan was performed using the aerosol generated by a BARC nebulizer. Scan alterations were correlated with those of chest radiography, bronchography, lung CT and/or brochoscopy. In every case scan showed characteristic intense deposition of radioaerosol in a short slightly dilated, bronchial segment immediately proximal to obstruction or stenosis. Characteristically it was accompanied by an airspace aerosol deposition defect distally. The finding of a short, clubbed, bronchial radioaerosol deposition with distal airspace defect is a sensitive, specific indicator of bronchial obstruction or stenosis. It was especially useful in the detection of the obstruction of a small bronchus at the lobar and sublobar levels. We propose to name it the prestenotic aerosol deposition sign.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.815-824
• /
• 2022

Among the main facilities of the power plant, the circulating water used for cooling the power generation system is supplied through the Circulation Water Intake Basin (CWIB). The vortexes of various types generated in the Pump Sump (PS) of CWIB adversely affect the Circulation Water Pump (CWP) and pipelines. In particular, the free surface vortex accompanied by air intake brings about vibration, noise, cavitation etc. and these are the causes of degradation of CWP performance, damage to pipelines. Then power generation is interrupted by the causes. Therefore, it is necessary to investigate the hydraulic characteristics of CWIB through the hydraulic model experiment and apply an appropriate Anti Vortex Device (AVD) that can control the vortex to enable smooth operation of the power plant. In general, free surface vortex is controlled by Curtain Wall (CW) and the submerged vortex is by the anti vortex device of the curtain wall. The detailed specifications are described in the American National Standard for Pump Intake Design. In this study, the circulating water intake part of the Tripoli West 4×350 MW power plant in Libya was targeted, the actual operating conditions were applied, and the vortex reduction effect of the anti vortex device generated in the suction tank among the circulating water intake part was analyzed through a hydraulic model experiment. In addition, a floor splitter was basically applied to control the submerged vortex, and a new type of column curtain wall was additionally applied to control the vortex generated on the free surface to confirm the effect. As a result of analyzing the hydraulic characteristics by additionally applying the newly developed Column Curtain Wall (CCW) to the existing curtain wall, we have found that the vortex was controlled by forming a uniform flow. In addition, the vortex angle generated in the circulating water pump pipeline was 5° or less, which is the design standard of ANSI/HI 9.8, confirming the stability of the flow.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.85-91
• /
• 2021

Aggregate waste separator with rotating separating net was designed for applying classification process of construction waste. In order to evaluate the performance of the aggregate waste separator, according to the type of waste, standardized waste samples are prepared using acrylic. The appropriate operating point was evaluated by the classification efficiency and misclassification rate of recycled aggregate according to the control frequency of the blower operating and inlet position of the separating net. The classification efficiency at the operating point of the aggregate waste separator was evaluated through flow analysis assuming recycled aggregate and waste sample as particles. As a result of the performance test, when the distance. between the conveyor belt and the inlet was 0.2m, the classification efficiency was 95%, but the misclassification rate of recycled aggregate was 2% or more, which satisfies the classification efficiency and the misclassification rate of less than 2%. The operating point was shown at a control frequency of 58Hz at a suction distance of 0.254m. As a resu lt of flow analysis, there was no misclassification of recycled aggregate. In order to redu ce constru ction waste in the existing recycled aggregate production process, adsorption system using a rotating separating net that can be operated as an installation type was built.