• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.5
• /
• pp.31-36
• /
• 2015

As one of the most promising propulsive systems in the future, the dual-mode scramjet engine has drawn the attention of many researches. Detailed flow features concerned with the isolator play an important role in the dual-mode scramjet system. The 2D numerical method has been used for the dual-mode scramjet with wind tunnel. To validate the ability of the numerical model, numerical results have been compared with the experimental results. Overall pressure distributions show quite good match with the experimental results. Back pressure has been studied for maximum pressure rising. According to the results, pressure distribution of supersonic inlet section is not influenced by back pressure. The shock train is pushed towards upstream as the back pressure increases. The maximum value of back pressure without inlet unstart goes up rapidly and then keeps constant when the isolator length increases. The optimal length of isolator section ($L/H_{th}$) is 8.7 in this model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.10-18
• /
• 2010

Scramjet engine is one of the core parts of hypersonic vehicle of next generation and being investigated by many countries. Korea Aerospace Research Institute performed a ground test of the model scramjet engine S1 in 2007. And, S2 model which is improved from S1 model in engine startability and thrust was tested with HIEST (High Enthalpy Shock Tunnel) at Kakuda Space Center of JAXA. Design condition of S2 model was Mach 6.7, however, it was tested at Mach 7.7 as an off-design condition test. As a test result, flow separation was found at the inside of the intake, but the engine showed stable combustion pressure distribution. Furthermore, compared to other test models, S2 model showed a good performance value in thrust and specific impulse.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.5
• /
• pp.65-76
• /
• 2020

On the initial design process of a scramjet vehicle such as the trajectory prediction, it is inevitable to estimate the aerodynamic performance of a three-dimensional effect. Despite the necessity of intensive computing for the three-dimensional model, it is inefficient in predicting a wide range of aerodynamic performance. In this study, an engineering model for aerodynamic performance was developed based on two-dimensional computational fluid analysis and linearized supersonic inviscid flow theory. Correspondingly, the three-dimension aerodynamic performance relations are presented based on the two-dimensional results. And the additional three-dimensional computation was performed to evaluate the adequacy for the extended relations.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.63-73
• /
• 2022

Investigation on operation of the test apparatus for the M4 semi-freejet tests with a full-scale vehicle model was carried out utilizing domestic facilities. An integrated design of the experimental apparatus and the vehicle model was obtained through iterative computational fluid dynamics (CFD) analysis. The test results showed that the M4 nozzle of the apparatus was fully expanded to provide required test conditions. It was also found that the intake of the vehicle model successfully started, and the corresponding shadowgraph images were recorded during the test. A variable nozzle of the model was set to adjust the back pressure of the model combustor, and wall-static pressures were measured to obtain the pressure distribution at the main locations of the model. The flame of torch ignitors and pilot fuel ignition were observed in a flame-holder of the combustor.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.888-893
• /
• 1997

진공청소기에서 발생하는 주 소음원은 홴(fan)에 의한 공력 소음및 모터의 진동에 기인하는 청소기 본체의 소음과 청소기 흡입 노즐(nozzle)에서 발생하는 공력 소음으로 나눌수 있다. 청소기 본체의 주 소음원인 원심 홴(centrifugal fan)은 고속으로 회전하며 구조가 복잡함으로 인해 소음 해석에 필수적인 유동의 해석이 어려우나 이산 와류법을 이용한 소음원 해석등의 연구가 진행중이다. 진공청소기 노즐부에서는 일반적인 분류(jet)의 토출과는 상이하게 공기를 흡입하는 구조로 소음 발생 기구의 모델링 (modeling)에 대한 연구는 거의 전무하다. 공력 소음은 Lighthill에 의하면 비정상 유체가 운동할 때 나타나는 변형에 기인한다고 하며 주변에 고정 경계면이 없는 상태에서 유체가 흐를 때 발생하는 소음을 이론적으로 연구하였다. 그후 Curle에 의해서 고체 벽면의 영향을 고려한 방정식의 해가 구해졌다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.06a
• /
• pp.32-44
• /
• 1990

유압 Vane pump는 carming, rotor, vane에 의하여 둘러싸인 공간체적이 rotor의 회전과 함께 변화하면서 pump 작용을 한다. 즉 공간체적이 증가하는 동안은 유압이 저압으로 되어 흡입구에서 유압유를 흡입하고 vane의 존환점 (vane이 가장 많이 출한 점)을 지나면 공간용적이 감소하여 유압류는 고압으로 될 수 있도록 되어있다. 이때 vane은 관성력과 점성력 그리고 유압류의 압력에 의한 힘으로 vane 선단이 캠링의 내면에 밀착되어 회전하도록 되어있다. 유압 vane pump 베인 선단부의 윤활문제와 관련된 지금까지의 연구로서는 Hibi 등에 의한 압력평형형 베인모터, W.D Beck, T.C Edwards에 의한 베인형 콤푸렛셔 Ujiie 등에 의한 베인형 진공펌프, Ueno 등에 의한 가변용량형 베인펌프의 마찰특성에 관한 연구 및 베인 이간 현상에 관한 실험적 연구가 있다. 그러나 이와 같은 연구들의 베인과 캠링 슬라이딩 부분에 관한 취급들은 베인선단 슬라이딩 부분에 가해지는 변동가중이 불명확했기 때문데, 단순히 슬라이딩 부분의 면적이 작다는 이유로 단성유체 윤활상태일 것이라는 확정을 하였을 뿐, 실제적으로 어느 정도의 윤활 상태를 파악하기 위하여 회전하는 vane의 가학적인 거동을 확실하게 규명하고자 함이 본 연구의 목적이다.

• Journal of Internet of Things and Convergence
• /
• v.3 no.1
• /
• pp.25-31
• /
• 2017

In the future a future type new city and the latest apartment will be built, and the IoT technology will be constructed and combined in large numbers indoors of ordinary households. An air cleaner that makes people in it comfortable is built in, and the suction port that sucks in the air of the air purifier and the discharge port that discharges it are set up around the room and come out. However, this is impossible to adjust because there is only a central switch on / off. Also, consuming a lot of electricity so that many electricity charges are caused by huge electricity consumption will eventually be a waste of resources. This would like to be adjusted and driven through the fine dust detection device to the room built-in air purifier and that has provided a solution to save electricity. In addition, since it exists in and around the room, you can grasp the position of the person and connect to the home network to enhance the convenience. Also, through analysis of the air, we provide a health-check solution that checks the user's health and adjusts it appropriately.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.411-414
• /
• 2010

In supersonic propulsion system, the inlet buzz phenomenon in the subcritical operation arises large pressure oscillation, combustion instability, and thrust loss, etc. Inlet Buzz phenomenon and the spray injection/combustion are figured out by the unified unsteady numerical analysis. TAB(Taylor Analogy Breakup) model was applied. Acoustic mode of the entire engine was investigated by detail analysis of pressure fluctuation at each location of the engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.29-41
• /
• 2021

The PID controller with fin angle and thrust as control input was designed based on the aerodynamic data of scramjet system. Flight simulation following a given trajectory which strike the target point after climb and cruise with constant dynamic pressure was conducted. After that, the required thrust for the climb and cruise was calculated and the required fuel flow rate for the hydrogen fuel dual mode scramjet combustor was analyzed. The combustor analysis of this study which conducted on integrated model of independently developed inlet, combustor, nozzles and external aerodynamic models, laying the foundation for the integrated design of the air breathing hypersonic system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.107-114
• /
• 2019

In many military aircraft, s-shaped diffusers are used to prevent the fan blades of the turbofan engine from being exposed to the outside. The inlet configurations of the air intakes for military aircraft vary, such as the rectangular intake of the F-22, the crescent-like intake of the F-16, elliptical intake of the MQ-25. In this study, the aerodynamic performance of s-shaped diffusers with various inlet configurations was evaluated using numerical analysis. In addition, the configuration of the middle section of an s-shape duct was changed to the crescent shape, and the effects on its aerodynamic performance were investigated. As a result, there was a slight difference in total pressure recovery according to various inlet configurations with ellipse-shaped middle sections. Also, the total pressure distortion was the lowest in the rectangular inlet shape. When the configuration of the middle section was changed from an ellipse to a crescent shape, the total pressure recovery remained at a high level, except for the ellipse-shaped inlet configuration. In terms of total pressure distortion, the duct with the crescent-shaped middle section showed a significantly more uniform pressure distribution than that with the ellipse-shaped middle section.