• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.296-302
• /
• 2024

An ionic conjugated polymer-iron (III) chloride composite was prepared via in-situ quaternization polymerization of 2-ethynylpyridine (2EP) using iron (III) chloride. Various instrumental methods revealed that the chemical structure of the resulting conjugated polymer (P2EP)-iron (III) chloride composite has the conjugated backbone system having the designed pyridinium ferric chloride complexes. The polymerization mechanism was assumed to be that the activated triple bond of 2-ethynylpyridinium salt, formed at the first reaction step, is easily susceptible to the step-wise polymerization, followed by the same propagation step that contains the propagating macroanion and monomeric 2-ethynylpyridinium salts. The electro-optical and electrochemical properties of the P2EP-FeCl₃ composite were studied. In the UV-visible spectra of P2EP-FeCl₃ composite, the absorption maximum values were 480 nm and 533 nm, and the PL maximum value was 598 nm. The cyclic voltammograms of the P2EP-FeCl₃ composite exhibited irreversible electrochemical behavior between the oxidation and reduction peaks. The kinetics of the redox process of composites were found to be very close to a diffusion-controlled process from the plot of the oxidation current density versus the scan rate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.193-204
• /
• 1998

The single crystal of the $LiTaO_3$has large electro-optic effects, so it is applied to optical switch, acousto-optic deflector, and optical memory device as hologram using photorefractive effect. In this study, optic-grade undoped $LiTaO_3$and Fe:LiTaO$LiTaO_3$single crystals were grown by the Czochralski method and optical transmission and absorption spectrums were measured in the wavelength of UV-VIS range. The curie temperature was determined with DSC and by measuring capacitance for the grown undoped crystal and ceramic powder samples of various Li/Ta ratio. In case of having a 48.6 mol% $Li_2O$ as a starting Li/Ta ratio, the results of concentration variations were below 0.01 mol% $Li_2O$ all over the crystal, so it was confirmed that $LiTaO_3$single crystals were grown under congruent melting composition having optical homogeneity. The curie temperature of the Fe:$LiTaO_3$crystal was increased with increased with increased doped Fe concentrations;by the ratio of $7.5^{\circ}C$ increase per Fe 0.1 wt%. Also, the optical transmittance was about 78 %, which was sufficient for optical device.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.178-185
• /
• 2007

Intermediate pentasil borosilicate zeolite-like materials have been crystallized by a novel method named steam-assisted conversion, which involves vapor-phase transport of water. Indeed, amorphous powders obtained by drying Na2O.SiO2.B2O3.TBA2O gels of various compositions using different boron sources are transformed into crystalline borosilicate zeolite belonging to pentasil family structure by contact with vapors of water under hydrothermal conditions. Using a variant of this method, a new material which has an intermediate structure of MFI/MEL in the ratio 90:10 was crystallized. The results show that steam and sufficiently high pH in the reacting hydrous solid are necessary for the crystallization to proceed. Characterization of the products shows some specific structural aspects which may have its unique catalytic properties. X-ray diffraction patterns of these microporous crystalline borosilicates are subjected to investigation, then, it is shown that the product structure has good crystallinity and is interpreted in terms of regular stacking of pentasil layers correlated by inversion centers (MFI structure) but interrupted by faults consisting of mirror-related layers (MEL structure). The products are also characterized by nitrogen adsorption at 77 K that shows higher microporous volume (0.160 cc/g) than that of pure MFI phase (0.119 cc/g). The obtained materials revealed high surface area (~600 m2/g). The infrared spectrum reveals the presence of an absorption band at 900.75 cm-1 indicating the incorporation of boron in tetrahedral sites in the silicate matrix of the crystalline phase.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.235-241
• /
• 2013

$NO_2$ vertical column densities were retrieved via ground based Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) measurements for the first time for 6 months over the spring season in 2007 and 2008 in Seoul, one the megacities in the Northeast Asia. The retrieved $NO_2$ vertical column densities were compared with those obtained from space borneOzone Monitoring Instrument (OMI). Over the entire measurement period, the $NO_2$ vertical column densities measured by MAX-DOAS ranged from $1.0{\times}10^{15}molec{\cdot}cm^{-2}$ to $6.0{\times}10^{16}molec{\cdot}cm^{-2}$ while those obtained by OMI ranged $1.0{\times}10^{15}molec{\cdot}cm^{-2}$ to $7.0{\times}10^{16}molec{\cdot}cm^{-2}$. The correlation coefficient between $NO_2$ vertical column densities obtained from MAX-DOAS and OMI is 0.73 for the entire measurement period whereas the correlation coefficient of 0.85 is found for the dates under the clear sky condition. The cloudy condition is thought to play a major role in increase in uncertainty of the retrieved OMI $NO_2$ vertical column densities since air mass factor may induce high uncertainty due to the lack of cloud and aerosol vertical distribution information.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.481-494
• /
• 2018

The accurate radiative transfer model simulation is essential for an accurate ozone profile retrieval using optimal estimation from backscattered ultraviolet (BUV) measurement. The input parameters of the radiative transfer model are the main factors that determine the model accuracy. In particular, meteorological parameters such as temperature and surface pressure have a direct effect on simulating radiation spectrum as a component for calculating ozone absorption cross section and Rayleigh scattering. Hence, a sensitivity of UV ozone profile retrievals to these parameters has been investigated using radiative transfer model. The surface pressure shows an average error within 100 hPa in the daily / monthly climatological data based on the numerical weather prediction model, and the calculated ozone retrieval error is less than 0.2 DU for each layer. On the other hand, the temperature shows an error of 1-7K depending on the observation station and altitude for the same daily / monthly climatological data, and the calculated ozone retrieval error is about 4 DU for each layer. These results can help to understand the obtained vertical ozone information from satellite. In addition, they are expected to be used effectively in selecting the meteorological input data and establishing the system design direction in the process of applying the algorithm to satellite operation.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.361-366
• /
• 2011

An in-situ, real-time monitoring of GaN epilayers grown by low pressure metalorganic chemical vapor deposition system modified for spectral reflectance was performed. Reflectance spectrums from 190~861 nm were observed using p-polarized light with incident angle of $75^{\circ}$. All reflectance spectrums showed interference oscillation caused by multiple reflection within GaN epilayers, and the spectrum from GaN with low crystalline quality showed weak reflectance intensity and much low amplitude of the oscillation because many defects in GaN resulted in light scattering and absorption. Signal variation of reflected light which was selected around strong constructive wavelength range was also observed during $NH_3$ supplying and $NH_3$ cut-off. There was no significant change in signal intensity when $NH_3$ cut-off for 10 sec, but it showed higher intensity when $NH_3$ was cut off for over 30 sec and its intensity kept unchanged. This result indicates that GaN surface was N-terminated during $NH_3$ supplying but Ga-terminated during $NH_3$ cut-off because of high nitrogen equilibrium vapor pressure of GaN, and metallic Ga-terminated surface caused slightly higher reflectance intensity.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.31-41
• /
• 1998

A carotenoprotein from the muscle of Ascidian (Halocynthia roretzi) was purified by ion exchange chromatography and gel filtration chromatography, and analyzed molecular weight, stability of pH and heat, effect of denaturing agents, amino acids and fatty acids composition. The purified carotenoprotein had absorption maxima of 463 nm and 439 nm. The carotenoprotein had an approxmimate molecular weight of 64.4 kDa in polyacrylamide gel electrophoresis. The amino acid compositions of carotenoprotein were mainly Gly (15.39%), Asn (11.31%), Gln (10.62%) and Ser (13.35%). The major fatty acids composition of carotenoprotein were $C_{16:1(n-7)}\;(15.4%)$, $C_{22:1(n-9)}\;(14.5%)$ and $C_{20:1(n-11)}\;(11.4%)$. The monounsaturated fatty acids (45.2%) contained abundant content compared to other saturated (38.1%) and polyunsaturated (11.7%) fatty acids.

• Korean Journal of Microbiology
• /
• v.30 no.6
• /
• pp.564-569
• /
• 1992

A green sulfur bacterium, Chlorobium limicola f. thiosulfatophilum NCIB 8327, was grown in modified Pfennig's medium including glu1amate as a nitrogen source. Glutamine synthetase was isolated through a series of ultracentrifugation. DEAE-Sepharose CL-6B ion exchange chromatography. Sephacryl S-300 gel permeation chromatography, and preparative HPLC. The recovery and purification fold of the enzyme were 2% and 46.3. respectively. The isolated enzyme was homogeneous on UV-Visible spectrum and polyacrylamide gel electrophoretogram. The relative molecular mass of the native enzyme was estimated to be 280,000 by gel permeation chromatography. The enzyme consisted of ten subunits with relative similar molecular mass. 30.000. which was estimated by SDS-polyacrylamide gel electrophoresis. The optimal temperature and pH of the enzyme were $30^{\circ}C$ and 7.0. Km values were 27.9 mM for L-glutamine and 0.92 mM for hydroxylamine-HCr. The enzyme activity was inhibited by alanine. glycine. and tryptophan considerably, but was not affected by asparagine, lysine. leucine. and valine.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.242-243
• /
• 2000

Erbium 첨가 광섬유(EDF) 광원은 출력 특성과 온도에 대한 파장 특성이 우수하여 Sagnac 간섭계의 원리를 이용한 광섬유 자이로스코프(이하 줄여 자이로라 함)에 많이 사용되고 있다. 이득매질인 EDF를 광원 겸 광증폭기로 사용하는 광섬유 증폭기형 광원 (Fiber Amplifier/source : FAS) 방식$^{[l-2]}$ 은 기존의 single-pass 방식$^{[3]}$ 에 비해서 구조가 단순하고 검출광 power가 크다는 장점이 있다. 그런데, 검출광 power가 큰 경우에 자이로의 SNR이 광원의 과잉잡음(excess noise)에 의해서 제한되므로 실제로 자이로의 측정감도는 개선되지 않는 문제점이 있다.$^{[4]}$ Single-pass 방식의 광원을 사용하는 경우, 적절한 신호처리를 통해 자이로 출력신호에 포함된 광원의 과잉잡음의 적정주파수 성분을 소거함으로써 자이로 신호의 SNR을 개선시킨 바 있었다.$^{[5]}$ 그러나, 일반적으로 single-pass 방식의 경우에는 검출광 power가 작아서 자이로의 SNR이 광원의 과잉잡음에 의해서 제한되는 경우는 드물다. 반면에 증폭기형 광원 방식은 자이로로부터 되돌아오는 신호광이 다시 광원으로 입사되어 EDF를 반대 방향으로 진행하는 동안 증폭되기 때문에 충분히 큰 검출광 power를 얻을 수 있다. 따라서, 자이로 신호에 포함된 광원의 과잉잡음이 소거된다면 자이로 신호의 SNR은 크게 개선될 것으로 여겨진다. 이 논문에서는 광섬유 증폭기형 광원 방식(FAS)의 자이로에 대해 위와 같은 신호처리를 이용하여 광인의 과잉잡음의 적정주파수 성분을 소거하는 실험을 하였다. (중략)한 흡수를 확인하고, $^4$T$_2$$\longrightarrow$$^4$A$_2$(650-800 nm), $^2$E$\longrightarrow$$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.\pm$0.06kHz Ge $F_4$; -1.84$\pm$0.04kHz$0.04kHz/TEX>0.04kHz 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.138-143
• /
• 2002

In this study, ZnS: Cu nano-crystals are synthesized by solution synthesis technique (SST). The structural properties such as crystal structure and particle morphology, and the optical properties such as light absorption/transmittance, energy bandgap, and photoluminescence (PL) excitation/emission are investigated. In an attempt to realize the Cu-doping easiness, the synthesis temperature (~$80^{\circ}C$) is applied to the synthesis bath, and the thiourea is used as sulfur precursor, unlike other general chemical synthesis route. Both undoped ZnS and ZnS : Cu nano-crystals have the cubic crystal structure and have the spherical particle shape. The position of light absorption edge is ~305 nm, indicating the occurrence of quantum size effect. The PL emission intensity and line-width are maximum and minimum, respectively, for Cu-doping concentration 0.03M. In particular, the dependence of PL intensity and line-width on the Cu-doping concentration for ZnS : Cu nano-crystals synthesized by SST is reported for the first time in this study. Experimental results of the absorption edge and the PL excitation show that the main emission peak of ZnS : Cu nano-crystals (~510 nm) in this study is due to the radiative recombination center in the energy bandgap induced by Cu dopant.