• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.428-428
• /
• 2016

Copper indium sulfide (selenide) (CuIn(S,Se)2,CISSe)는 1.0~1.5 eV의 Direct band gap과 105 cm-1이 넘는 큰 광 흡수 계수를 가지고 있어 박막 태양전지의 흡수층으로써 연구되어 왔다. 최근 대량생산 및 저가 공정에 용이하다는 측면에서 용액 공정 기반 CISSe 태양전지 연구가 크게 주목 받고 있다. 용액공정 기반 중 하이드라진을 사용 한 경우 매우 높은 효율을 기록하였으나, 하이드라진 자체의 유독성과 폭발성 때문에 분위기 제어가 필요하고 여전히 저가화 및 대면적 제작에 한계가 있다. 따라서 알코올 솔젤 기반 CISSe 태양전지 제작 연구가 많이 진행되었으나, 결정립 성장 및 칼코겐 원자를 공급하기 위해 불가피하게 황화/셀렌화 후속 열처리 공정을 요구한다. 후속 열처리 공정은 폭발성의 황화수소/황화셀레늄 기체 분위기 제어와 고가의 장비를 필요로 한다. 본 연구에서는 매우 안정적이며 저가 용매인 물과 아민계 첨가제를 이용하여 Cu, In 전구체와 S, Se 이 포함된 Cu-In-S 잉크와 Se잉크를 제작하였다. 잉크 내에 S, Se을 첨가 함으로써 추가적인 후속공정 없이 비활성 가스 분위기에서 고품질의 CISSe 박막 제작을 가능케 하였다. 또한 Se 잉크 증착 횟수에 따른 결정 구조, 광학적 성질의 차이에 주목하였다. 따라서 수계 잉크를 대기 중에서 스핀코팅으로 박막을 제작한 후, Hot plate에서 건조하여 균일한 박막을 제조하고, 제작된 박막을 tube furnace에서 환원 분위기 및 비활성 가스 분위기에서 열처리 진행하여 $1.3{\mu}m$ 두께의 고품질의 CISSe 흡수층을 제작하였다. 이러한 흡수층에 대해 XRD, SEM, EDS 분석을 진행하여, 결정성, 미세구조, 및 조성을 확인하였으며, 제작된 흡수층 위에 버퍼층/투명전극층을 차례로 증착하여 CISSe 태양전지를 제작하여 셀 성능 및 양자 효율 특성을 파악하였다. 또한 액상 Raman 분석을 통해 결정립 성장 과정 메커니즘을 제시하였다.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.38-43
• /
• 2018

In this study, using electro-refining process and methane gas reduction, we performed studying the recovery of tin with high purity from waste tin oxide had used as a electrode rod of ceramic furnace which occurred during glass production process. We recovered the crude tin of 99% purity from a methane gas reduction process and controlled a little amount of impurities. When the electrolytic refining condition was a current density of $60A/dm^2$ and the sulfuric acid concentration of 0.75 mol, 96.8% of recovered tin (99.979% of purity) were recovered during the electrolytic refining. We confirmed that toxic impurities such as Pb, Sb included in electrode rod. could be controlled.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.478-486
• /
• 2010

The qualities of ginger prepared by an MPD (molecular press dehydration) method using maltodextrin, or dried using reused dehydration liquid, or prepared by freeze-drying or hot-air drying, were compared in terms of approximate overall composition, color, water absorption index, water solubility index, total sugar level, reducing sugar concentration, antioxidant activity, and gingerol content. The approximate composition of ginger prepared by the MPD method was lower in overall biochemical content than were those of gingers prepared using other methods. Ginger prepared by the MPD method retained the original ginger color. The water absorption and solubility index of ginger prepared by the MPD method (using maltodextrin) were better than those of gingers dried using other methods. The total sugar content did not change noticeably upon processing. The reducing sugar content of ginger prepared by hot-air drying was low. The antioxidant activity of ginger prepared by the MPD method was higher than that of freeze-dried and hot air-dried ginger samples, with values lower than those of BHA (3(2)-t-Butyl-4-hydroxyanisole) and BHT (2,6-Di-tert-butyl-4-methylphenol). The gingerol content of ginger prepared by the freeze-drying method was higher than that of gingers prepared by other methods. However, ginger constituents were present in the dehydration liquid used in the MPD method. The results indicate that both the MPD method (using maltodextrin) and the use of reused dehydration liquid are efficient methods by which ginger can be dried.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.484-489
• /
• 1999

The extraction of trace amounts of Se in volcanic rock was investigated using the hydride generation method and atomic absorption spectrophotometry. The powdered rock, 1.0 g, was decomposed with the mixture of $HClO_4$, $HNO_3$ and HF in an acid digestion bomb at $140^{\circ}C$ for 2 hours. For the reduction of Se(VI) to Se(IV) in the solution, 10 mL of 6 M HCl and 0.2 mL of 1 M KBr were added to the solution and the mixture was heated for 30~45 minutes. $H_2Se$ was produced by adding 3% $NaBH_4$ as a strong reducing agent, extracted by nitrogen gas, and was absorbed twice into $KMnO_4$solution. The contents of Se in the solution were determined by generation/AAS. According to the proposed method, 1.0 ng or more of Se was quantitatively extracted and Se levels of 2.5 ng/g or more in rock samples could be determined. For example, Se in a rhyolite was determined with the precision of $19.5{\pm}1.3ng/g$(95% confidence, n=6).

• Journal of the Korean Chemical Society
• /
• v.50 no.4
• /
• pp.315-320
• /
• 2006

manganese oxides have been prepared by Chimie Douce redox reaction between permanganate and chalcogen element fine powder under acidic condition (pH = 1). According to powder X-ray diffraction analyses, the S- and Se-doped manganese oxides are crystallized with layered birnessite and tunnel-type -MnO2 structures, respectively. On the contrary, Te-doped compound was found to be X-ray amorphous. According to EDS analyses, these compounds contain chalcogen dopants with the ratio of chalcogen/manganese = 4-7%. We have investigated the chemical bonding character of these materials with X-ray absorption spectroscopic (XAS) analysis. Mn K-edge XAS results clearly demonstrated that the manganese ions are stabilized in octahedral symmetry with the mixed oxidation states of +3/+4. On the other hand, according to Se K- and Te L1-edge XAS results, selenium and tellurium elements have the high oxidation states of +6, which is surely due to the oxidation of neutral chalcogen element by the strong oxidant permanganate ion. Taking into account their crystal structures and Mn oxidation states, the obtained manganese oxides are expected to be applicable as electrode materials for lithium secondary batteries.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.65-72
• /
• 2014

In this paper, the water-based Ag nanofluids are synthesized by the chemical reduction method and their extinction coefficients are measured by an in-house developed measurement device. The Ag nanofluids are manufactured by the chemical reduction method with the mixing of silver nitrate ($AgNO_3$) and sodium borohydride ($NaBH_4$) in an aqueous solution of polyvinyl pyrrolidone (PVP). The extinction coefficients of Ag nanofluids are measured by means of the in-house developed apparatus at a wavelength of 632.8nm according to the particle volume fractions. The results show that the extinction coefficient of water-based Ag nanofluids increases with the increase of nanoparticle concentrations. Finally, the temperature field and efficiency of direct absorption solar collector (DASC) are analytically estimated based on the measured extinction coefficient of water-based Ag nanofluids. The results indicate that the direct absorption solar collectors using nanofluids have the feasibility to improve the efficiency of conventional flat-plate solar collectors without using an absorber plate.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.279-283
• /
• 2022

UV-vis spectroscopy is one of the powerful tools for measuring the concentrations of reactant and products during a chemical reaction. However, there is an limitation of using the technique when the reaction undergoes in high concentration and high temperature. Color analysis using camera images can provide the identical results with UV-vis analysis with regardless of the sample concentration and temperature. The catalytic reduction reaction of resazurin to resorufin was investigated using the color analysis with the color spaces such as CIE L^*a^*b^*. Moreover, the color analysis enabled the independent analysis of two different material's concentrations without the deconvolution of overlapped wavelengths unlike the case of using UV-vis spectroscopy.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.181-187
• /
• 2014

In order to use the spherical atomizing reduction steel slag (ladle furnace slag, LFS) instead of the fine aggregate of polymer concrete composites, various specimens were prepared with various replacement ratios of atomizing reduction steel slag and the addition ratios of polymer binder. Physical properties of these specimens were investigated through the absorption test, the compressive strength test, the flexural strength test, the hot water resistance test, the pore analysis and the micro-structure using scanning electron microscope. Results showed that the compressive strength and flexural strength of specimens with 7.5% of polymer binders increased with the increase of replacement ratios of atomizing reduction steel slag, but those of the specimens with 8.0% or more of polymer binders showed a maximum strength at a certain replacement ratio due to the material segregation causing the increase of fluidity. By hot water resistance tests, the compressive strength, flexural strength, average pore diameter, and bulk density decreased but the total pore volume and pore diameter increased. It was concluded that the amount of polymer binders could be reduced by maximum 23.8%, because the workability of the polymer concrete was remarkably improved by using the atomizing reduction steel slag instead of fine aggregate. However, since the use of atomizing reduction steel slag decreased the resistance of the polymer concrete to hot water, further studies are required.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.1 s.60
• /
• pp.23-28
• /
• 2007

Ascorbic acid (vitamin C, AsA) has been known as a strong reducing agent and is supposed to retard the synthesis of melanin pigment. A main problem that arose in using vitamin C in cosmetic formulation was its poor stability and low skin permeability, which result in low lightening efficacy in clinical trials. In this study, iontophoretic gel patch with flexible thin layer battery was employed in order to enhance skin permeation of vitamin c derivative (ascorbyl glucoside, AsAG) and to increase its lightening efficacy. in vitro iontophoretic skin permeation and stability of AsAG, safety and clinical lightening efficacy of iontophoretic patch containing 2% AsAG solution were examined. A optimun current of ionthophoretic patch for korean women was 0.1 mA, considering the skin permeability and skin irritation of consumers. We suggest that iontophoretic gel patch could be a safe system for enhancing the skin permeation of AsAG and lightning efficacy.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.65-71
• /
• 1996

The chemical behaviour of the Eu(Ⅲ) complexes with organic ligands(tris[3-(trifluoromethylhydroxymethylene-camphorato)]) and tris[3-heptafluoropropylhydroxymethylene-camphorato)] has been investigated by the UV/vis-spectrophotometric, magnetic, and electrochemcial methods. The two or three energy absorption bands are observed by the spectra of these complexes. The magnitude of crystal field splitting energy, the spin pair energy and strength were obtained from the spectra of the complexes. These complexes are found to be delocalization, low-spin state, and strong bonding strenth of electron configuration. The magnetic dipolemoment are found to be diamagnetic. The redox reaction processes of complexes were investigated by cyclic voltammetry in aprotic solvent. The redox reaction processes of complexes are turned out to be single or double reaction with respect to one electron diffusion current.