• Journal of Korean Society of Steel Construction
• /
• v.22 no.3
• /
• pp.261-269
• /
• 2010

It is now possible to design buildings in various forms using a diagrid structural system, which is the one of the most useful structural systems. It is difficult to design and construct the connections, however, and the bucklings in braces weaken the seismic performance of structures. In this study, the initial stiffness, ductility, and energy-dissipated capacity of a diagrid and a diagrid BRB were evaluated via frame tests. The results of the cycling load tests showed that the diagrid BRB had better initial stiffness and ductility, and dissipated extra energy after the BRBs were yielded.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.36-43
• /
• 2007

Elemental analysis, SEM-EDX, X-ray diffraction (XRD) and IR analysis were adopted to examine the quality of charred woods excavated from the underground of the Daewoongjeon Hall of Youngguksa Temple, Youngdong-gun, Chungbuk, Korea. A large amount of calcium was detected in SEM-EDX analysis. The analyses of chemical elements suggested that completely charred wood was carbonized at about $500^{\circ}C$. The XRD results indicated the destruction of cellulose crystalline region. The IR analysis exhibited that thermal degradation of wood component was different depending upon the carbonization temperature. It can be suggested from the results that PEG with different molecular weights should be used for the conservation of excavated charred woods.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.121-132
• /
• 1994

The aim of the present paper is to clarify the damage characteristics fur ship bottom stiffened platings in grounding. For this purpose, a series of tests are performed. A rigid wedge is quasi-statically pushed into the high tensile steel plates with two stiffeners. The aspect ratio of plates(a/B) is in the range from 1.0 to 2.5 and the thickness of plates is in the range from 3.4 to 7.0mm. Also other parameters, namely the shape of wedge tip, wedge angle and property/direction of stiffeners are varied. The test is carried out using the 100ton universal test machine. During the loading. both applied force and length of cutting(penetration) resulting in the grounding force-penetration response are measured.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.18-31
• /
• 2018

Rotorcrafts have more severe crashworthiness conditions than fixed wing aircraft owing to VTOL and hovering. Recently, with the increasing demand for highly efficient transportation system, application of composite materials to aircraft structures is increasing. However, due to the characteristics of composite materials that are susceptible to impact and crash, demand to prove the crashworthiness of composite structures is also increasing. The purpose of present study is to derive the structural concept of composite subfloor for rotorcrafts and verify it. In order to design a crashworthy composite subfloor, the conceptual design of the testbed helicopter for the demonstration and the derivation of energy absorbing requirement were carried out, and the composite energy absorber was designed and verified. Finally, the testbed for the demonstration of a crashworthy composite structure was fabricated, and performed free drop test. It was confirmed that the test results meet the criteria for ensuring occupant survivability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.180-184
• /
• 2001

Cleidocranial Dysplasia(CCD) is an autosomal dominant human bone disease characterized by abnormal clavicles, patent sutures and fontanelles, and dental anomalies. Among dental anomalies, it is characterized that permanent dentition is severly disturbed due to multiple supernumerary teeth and abnormalities of tooth morphology. A eight-year-old female patient diagnosed as cleidocranial dysplasia visited in our hospital. Upon clinical oral exam, retained deciduous teeth, constriction of dental arch, anterior cross bite, and multiple dental caries were observed. In the dental panoramic radiograph, retained deciduous teeth and multiple supernumerary teeth in the maxilla and the mandible were found. In the cephalometric radiograph, open sutures and wormian bones were seen. In the chest P-A view absence of clavicles was observed. The cleidocranial dysplasia patients have eruption problems in permanent dentition both in regions with and without supernumerary teeth. The severely delayed or arrested eruption of permanent teeth has been ascribed to various factors : 1) The presence of multiple supernumerary teeth, 2) malformed roots with lack of cellular cementum, 3) the jaw bone being too dense, and 4) abnormal resorption of bone and primary teeth. Formation and maturation of primary teeth in cleidocranial dysplasia are normal, whereas the permanent dentition has various anomalies. Therefore, dentists should understand the development of dentition in cleidocranial dysplasia, and treat them in proper time.

• Korean Journal of Food Science and Technology
• /
• v.41 no.5
• /
• pp.503-508
• /
• 2009

The principal objective of this study was to evaluate the physicochemical properties and volatile compound contents of Moju acquired from 12 restaurants in Jeonju. The alcohol contents were lower than 2.1%, and the pH values ranged from 3.85 to 4.38. Total acidity, $^{\circ}Bx$, and UV absorbance values differed among the samples according to the type of side materials added. Reducing sugar contents were found to be substantially superior to other commercial takju variants. Malic and lactic acid contents were higher than the contents of other organic acids, and the free sugar contents were as follows: maltose>glucose>fructose. Overall, the high b (yellowness) and cP values were attributable to the turbid yellow and heavy condition of the samples. The volatile compound contents of Moju were analyzed via GC and GC/MSD. 30 components were identified, including 3 alcohols, 12 esters, 7 hydrocarbons, and 4 aldehydes. Among the alcohol compounds, benzeneethanol levels were higher than the levels of isoamyl alcohol. Ethyl caprate, ethyl palmitate, and ethyl linoleate, which were fundamentally attributable to origin liquor, were highest among the 12 esters. (E)-cinnamaldehyde, which was the most abundant among 7 hydrocarbons, and (E)-cinnamyl acetate contents were attributed to the presence of cinnamon, a common supplement in the processing of Moju.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.114-123
• /
• 2013

This study was performed to verify the structural reinforcing effect of recycled polyethylene terephthalate (PET) fiber. In order to verify the structural reinforcing capacity of RPET fiber, recycled PET fiber added RC slab specimens were prepared to examine the flexural capacity while those of plain concrete and those of added with PP fiber, and the behavior of the specimens were also evaluated. The result shows that the compressive strength reduces as the fiber volume fraction increases, and the rate of reduction varies from 2% to 7%. The result of the flexural capacity shows that the ultimate capacity of plain specimens is the highest compare to those fiber reinforced specimens, but it has shown that specimens reinforced by 5% PET fiber has the highest energy absorption and the ductility index. In the application of PET fiber in slab specimens has shown that ductility capacity have increased where the ultimate capacity decreasing. That is the different tendency of beam specimens, which the ultimate capacity and the ductility of those have both shown the improvement compare to plain concrete specimens, which means the reinforcing effect of PET fiber in slab is less strong than in beam. Therefore, the application of PET fiber in slab structures as reinforcement needs the proper mix proportion of concrete and volume fraction of PET fiber with deep consideration of the structures.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.162-170
• /
• 2000

This study quantified the effects of urban greenspace on microclimate amelioration and atmospheric $CO_2$ reduction for several residential districts selected in Korea and Japan. The study also explored fire obstruction by urban trees to develop systematic planting guidelines. Transpiration by a Zelkova serrata tree (diameter at breast height: 15 cm) in a day of August equaled cooling effect of about 3 air conditioners running for 12 hours. Average air temperature for the growing season was 0.5$^{\circ}C$ and 1.2$^{\circ}C$ cooler, respectively, in districts with 12% and 22% cover of woody plants than in a district with no vegetation. Annual $CO_2$ uptake and $O_2$ production by woody plants were 3 times greater in a district which was 2 times higher in their cover. Woody plants played, in a district with their 22% cover, an important role through offsetting total $CO_2$ emission from the district by about 3% annually, and through producing 10% of annual $O_2$ requirement by all residents within the district. Appropriate planning strategies of residential greenspace, including species selection, planting layout, greenspace enlargement, and maintenance were suggested to improve microclimate amelioration, air purification, and fire obstruction.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.31-38
• /
• 2019

This study quantified, through a direct harvesting method, storage and annual uptake of carbon from open-grown trees for three landscape tree species frequently planted in the southern region of Korea, and developed quantitative models to easily estimate the carbon reduction by tree growth for each species. The tree species for the study included Camellia japonica, Lagerstroemia indica, and Quercus myrsinaefolia, for which no information on carbon storage and uptake was available. Ten tree individuals for each species (a total of 30 individuals) were sampled considering various stem diameter sizes at given intervals. The study measured biomass for each part of the sample trees to quantify the total carbon storage per tree. Annual carbon uptake per tree was computed by analyzing the radial growth rates of the stem samples at breast height or ground level. Quantitative models were developed using stem diameter as an independent variable to easily calculate storage and annual uptake of carbon per tree for study species. All the quantitative models showed high fitness with $r^2$ values of 0.94-0.98. The storage and annual uptake of carbon from a Q. myrsinaefolia tree with dbh of 10 cm were 24.0 kg and 4.5 kg/yr, respectively. A C. japonica tree and L. indica tree with dg of 10 cm stored 11.2 kg and 8.1 kg of carbon and annually sequestered 2.6 kg and 1.2 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from the gasoline consumption of about 42 L for Q. myrsinaefolia, 20 L for C. japonica, and 14 L for L. indica. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of approximately 8 L for Q. myrsinaefolia, 5 L for C. japonica, and 2 L for L. indica. The study pioneers in quantifying biomass and carbon reduction for the landscape tree species in the southern region despite difficulties in direct cutting and root digging of the planted trees.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2015

This paper presents a new formulation for transient simulations of microwave propagation in heterogeneous unbounded domains. In particular, perfectly-matched-layers(PMLs) are introduced to allow for wave absorption at artificial boundaries used to truncate the infinite extent of the physical domains. The development of the electromagnetic PML targets the application to engineering mechanics problems such as structural health monitoring and inverse medium problems. To formulate the PML for plane electromagnetic waves, a complex coordinate transformation is introduced to Maxwell's equations in the frequency-domain. Then the PML-endowed partial differential equations(PDEs) for transient electromagnetic waves are recovered by the application of the inverse Fourier transform to the frequency-domain equations. A mixed finite element method is employed to solve the time-domain PDEs for electric and magnetic fields in the PML-truncated domain. Numerical results are presented for plane microwaves propagating through concrete structures, and the accuracy of solutions is investigated by a series of error analyses.