• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.211-217
• /
• 2014

This study analyzes the nonlinear interaction between two different vortex shedding frequencies from a cylinder with two diameters. In particular, two different vortex shedding frequencies are generated by preparing a cylinder having two diameters artificially. Flow velocity fluctuations behind the cylinder are measured three-dimensionally. Additionally, we fabricated a hole and placed a pressure transducer for measuring the pressure on the cylinder surface. The pressure signal from the pressure transducer is used as basic signal. A TSC(Trans Spectrum Coherence) is used for checking the strength of the nonlinear interaction between two different vortex shedding frequencies. As a result, the following are clarified: i) frequency distribution behind the cylinder, ii) three-dimensional flow state behind the cylinder through calculation of ensemble average, and iii) close relationship between the vertical vortex and change of low frequency by nonlinear interaction between two different vortex shedding frequencies from the cylinder with two diameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.417-417
• /
• 2010

작은 직경의 외부 전극 형광램프와 냉음극 형광램프는 LCD-TV의 광원으로 사용하고 있다. 교류 전압으로 구동되는 외부전극 형광램프와 교류 및 직류 전압으로 구동되는 냉음극 형광램프에서 광 방출 신호를 관측하였다. 이러한 빛은 양광주의 고전압부에서 접지부로 $10^5-10^6\;m/s$의 속도로 전파한다. 램프에서 방출된 광이 양광주를 따라 전파하는 현상은 일반 형광등과 네온싸인관에서도 동일하게 관측된다. 이러한 빛의 전파 현상은 지난 70년의 형광 램프 역사상 처음 관측되었다. 양광주 영역의 플라즈마는 높은 전압과 수 십 kHz가 인가되는 전극부에서 발생한 고밀도 플라즈마의 확산으로 생성된다. 고전압이 인가된 전극부에서 발생한 고밀도의 플라즈마는 인가되어지는 구동 주파수에 해당하는 섭동으로 작용하여 플라즈마 파동으로 양광주 영역으로 전파된다. 이러한 플라즈마 파동은 고밀도 전극부에서 저밀도 양광주 영역으로 플라즈마 밀도의 차이에 의하여 된다. 이때 파동의 전파 속도는 관 전류에 따라 달라진다. 타운젠트 방전 이전의 저 전류일 때는 ${\sim}10^5\;m/s$이며, 타운젠트 방전 이후 글로우 방전에서의 전파 속도는 ${\sim}10^6\;m/s$로 증가한다. 또한 타운젠트 방전 이전의 저 전류에서는 파동이 감쇠하는 경향을 보이며, 고 전류에서의 파동의 감쇠는 매우 작다. 관측된 광신호의 결과로부터 전파되는 파동의 원인은 플라즈마 확산에 의한 밀도의 차이에 의한 것으로 해석된다. 즉, 수 십 kHz의 구동 주파수를 갖는 플라즈마 파동이 양광주의 플라즈마 밀도 구배에 의하여 전파된다. 이러한 파동은 높은 전압이 인가되는 전극부에서 낮은 전압부로 향하는 조류의 흐름과 같이 나타난다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.645-650
• /
• 2018

Software stability is the possibility of operating without any malfunction in the operating environment over time. In a finite failure NHPP for software failure analysis, the failure occurrence rate may be constant, monotonically increasing, or monotonically decreasing. In this study, based on the NHPP model and based on the software failure time data, we compared and analyzed the attributes of the software development cost model using the exponential distribution Rayleigh distribution and inverse exponential distribution considering the shape parameter of the Weibull distribution as the life distribution. The results of this study show that the Rayleigh model is the fastest release time and has the economic cost compared to the inverse-exponential model and the Goel-Okumoto model. Using the results of this study, it can be expected that software developers and operators will be able to predict the optimal release time and economic development cost.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.225-235
• /
• 1999

For a comparative evaluation of three turbulence models in the analyses of thermal discharge behavior into a crossflow, a 2-dimemsional near-field numerical model is developed. The selected models are k-$\varepsilon$ and k-ι turbulence models as a 2-equation turbulence model and a 4-equation turbulence model in which the transport equations for mean of the temperature fluctuation squared and its dissipation rate for the consideration of buoyancy production and turbulent heat flux terms are added to a k-$\varepsilon$ turbulence model. The developed models are applied to a steady flow in an open channel with simple geometry and the numerical results agree with the existing experimental data. Numerical results of buoyancy induced gravitational lateral spreading by 4-equation turbulence model agree with the experimental data better than those of 2-quation turbulence models. The flow patterns by 4 and 2-equation turbulence models are similar.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.661-669
• /
• 2007

Eyer since the Prandtl's experiment in 1934 and X-21 airjet test in 1950 both attempting to reduce drag, it was found that controlling the velocities of surface for extremely fast-moving object in the air through suction or injection was highly effective and active method. To obtain the right amount of suction or injection, however, repetitive trial-and error parameter test has been still used up to now. This study started from an attempt to decide optimal amount of suction and injection of incompressible Navier-Stokes by employing optimization techniques. However, optimization with traditional methods are very limited, especially when Reynolds number gets high and many unexpected variables emerges. In earlier study, we have proposed an algorithm to solve this problem by using step by step method in analysis and introducing SQP method in optimization. In this study, we propose more effective and robust algorithm and techniques in solving flow optimization problem.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.191-197
• /
• 2002

The prediction of the dynamic behaviors of buoyant water discharges into a large volume of water bodies, the flows of water accompanying the density differences due to temperature differences and sometimes also to salinity differences, have attracted great concern over several decades. Heated water surface discharges from power plants and freshwater discharges in estuaries are typical examples of the buoyant flows. (omitted)

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.108-114
• /
• 2002

The new system using a glow discharge atomic emission spectrometer for the direct analysis of solid samples has been developed and characterized. The system was consisted of new glow discharge cell improved previous gas-jet boosted nozzle and radio-frequency power supply. In the case of previous type glow discharge chamber, it had been fitted trace analysis of low alloy steel with low discharge power, because it was to decrease redeposition and increase sample weight loss. But it had a problem that plasma becomes unstale due to increased sample weight loss and redeposition resulting from the high discharge power. Because of being problem of previous glow discharge, it is impossible to analyze using high power. The modified gas-jet boosted glow discharge to solve this problem would improve to be less sample loss rate of modified nozzle than sample loss rate of previous nozzle on the equal discharge condition, and improve to increase stability of plasma. The effect of discharge parameters such as discharge pressure, gas flow rate and power on the sample loss rate, emission intensity has been studied to find optimum discharge conditions. The calibration curves of Fe were obtained with 3 low-alloy samples.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2008

Salt wedge into the river from the sea or fresh water flume (fresh wedge) in the ocean from the sea has density current characteristics. However, when temperature and salinity simultaneously determine the density of wedges, one of salinity and temperature can distributed in the reversed profiles against gravity, even though the density profile is stable. In this case, the double diffusive process is critical in determining mixing rate. The present work studies relative contribution of shear driven mechanical mixing component and double diffusive layering process, when warm salty denser water is introduced into the cold fresh lighter water column. Laboratory experiment releases warm salty denser water into cold fresh lighter water controlling discharge amount to achieve the steady state of density current. When longitudinal density rate becomes 15, the released amount ratio of salt and heat changes sharply and in the releasing point, vigorous mixing occurs with increase of discharged amount due to double diffusion. Double diffusion distabilizes gravitational stability and enhances the mixing rate up to $6{\times}10$ times at the lower density ratio comparing to the higher density ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.523-523
• /
• 2013

대기압 제트 플라즈마는 의료산업 및 재료공정, 정수, 기체흐름 제어 등 다양한 분야에 적용을 위한 연구가 활발히 진행되고 있다. 뿐만 아니라 구동 조건에 따라 다양한 방전 모드가 존재하며, 이에 따라 발생된 플라즈마의 광학적 및 전기적 특성도 매우 다르게 나타나기 때문에 과학적으로도 새로운 현상들이 속속 발표되고 있다. 대기압 제트 플라즈마에서 중요한 과학적 현상 중 하나인 스트리머(streamer) 혹은 플라즈마 총알(plasma bullet)은 수-수십 kHz의 저주파 전압으로 구동 시 특정 조건에서 발생하는 현상으로, 최근 들어 시간분해능이 높은 ICCD 카메라를 이용하여 스트리머의 발생 및 전파에 대한 새로운 현상의 발견과 다양한 물리적 이해가 시도되고 있다. 본 연구에서는 헬륨 대기압 제트 플라즈마에 포함된 질소 함유량에 따른 다중 스트리머의 발생 및 기작의 이해를 시도하였다. 구동 전압 및 주파수, 헬륨기체의 유량, 전극 구조 및 간격 등 모든 조건이 동일한 상태에서 질소기체의 함유량을 증가시킬수록 특정 영역에서 스트리머의 개수가 증가하는 것을 관찰되었다. 또한 $N_2{^+}$의 방출광 세기가 헬륨 및 산소 원자의 방출광보다 지배적인 것으로 측정되었으며, 이는 헬륨 플라즈마에서 흔히 나타나는 헬륨 metastable에 의한 질소분자의 페닝 이온화(Penning ionization) 때문이다. 본 연구팀은 페닝 이온화($He^*+N_2{\rightarrow}He+N_2{^+}+e$)로 인해 추가적으로 발생하는 전자가 다중 스트리머 발생에 중요한 역할을 하는 것이라 제안한다. 좀 더 심화적인 분석을 하고자 헬륨-질소 플라즈마에서 주된 여러 가지 반응식을 이용하여 페닝 이온화에 의한 이온화율 및 전자의 직접적인 충돌에 의한 질소, 헬륨의 이온화율의 계산을 수행하여 특정 영역에서 헬륨의 이온화율보다 질소 페닝 이온화율이 더 커지는 것을 확인하였다.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.585-590
• /
• 2020

Successful early diagnosis of cancer diseases such as lung, prostate, liver and adrenocortical carcinoma is a key step in determining the cost of treatment, survival rate, and cure rate. Most of current cancer diagnosis systems including biopsy, computed tomography (CT), positron emission tomography (PET)-CT, magnetic resonance imaging (MRI), ultrasonography, etc., require expensive and complicated equipment with highly trained human resources. Global medical and scientific communities have thus made numerous efforts on developing effective but rapid disease management system via introducing a wide spectrum of point-of-care medical diagnosis devices. Among them, a lateral flow immunoassay strip technique has gained a great attention due to many advantages such as cost-effectiveness, short inspection time, and user friendly accessibility. In this mini-review, we will highlight recent research trend on the development of colorimetry based LFIA strips for cancer diagnosis and discuss the future research direction and potential applications.