• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.283-283
• /
• 2021

혼합대는 지표수와 지하수의 수리적 교환이 일어나는 경계부로써 1) 수문학적 관점에서는 하도와 하상간의 물교환이 이루어지는 공간으로 다양한 물리적·화학적 작용이 발생, 2) 생지화학적인 관점에서는 하상 간극수 흐름에 의한 전이대(ecotone)를 형성하여 용존산소·영양물질·용존유기탄소의 이동뿐만이 아니라 지하수로부터 열에너지·무기염류의 공급을 유도하면서 높은 생지화학적 활동과 변환을 야기하는 산화·환원 반응구역, 3) 생태적인 관점에서는 저서생물과 지하 유기체종을 특징으로 하는 서식지이나 잠재적인 레퓨지움(refugium) 등의 관점에서 해석될 수 있다. 국내 하천환경의 생태학적 지속가능성을 위한 지표수-지하수 혼합대 관리에 대한 중요성이 점차 증대되고 있지만 우리나라는 여전히 지하수의 이용 및 보전과 지하수의 안정적인 수량·수질 확보를 목표로 관리를 추진하고 있다. 따라서, 실질적인 지표수-지하수 혼합대에서 발생하는 다양한 현상의 이해나 관리방안에 관한 연구는 아직 미비한 상황이다. 지표수-지하수 혼합대에 관한 보고서, 논문 등을 종합하여 혼합대의 영향인자를 살펴보면 1) 수리수문 특성에는 수리전도도·하천 수위·하천 유속·하천수 수온, 2) 수질 특성에는 유기오염물질·영양염류, 3) 수생태 특성에는 대형무척추동물 등으로 분류할 수 있다. 지금까지 단일 연구분야의 접근방법으로 다양한 현장측정기법 및 모델링을 통한 혼합대 연구가 수행되고 있지만, 혼합대가 가지는 환경적 중요성에 대한 이해와 인식이 부족하고, 혼합대 내부에서 발생하는 복합적인 프로세스로 인해 전문가들조차 연구에 어려움을 가질 것이다. 지표수-지하수 혼합대의 효율적인 관리를 위해서는 수리수문·수질·수생태 등 다양한 시각에서 접근하여 학제간 융합연구를 통해 기초 데이터를 상호교환하고, 기존의 혼합대 조사에 부족한 부분을 해결할 필요가 있다. 향후 하천 기저유출 및 혼합대 기초자료 구축, 혼합대 흐름 정량화, 하천복원사업에 의한 혼합대 영향 규명 등의 연구를 수행함으로써 혼합대를 체계적으로 관리할 수 있는 기술 방안을 제시할 필요가 있다.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.135-141
• /
• 2013

The purpose of this study is to determine the quantity of selenium in grains by hydride generation-inductively coupled plasma mass spectrometry. Two sample preparation methods, beaker and microwave digestions, are compared and the former shows better result. The optimum condition for hydride generation is 4.0 M for HCl, 3% for $NaBH_4$ with the sample flow of 0.6 mL/min. The detection limit is 0.02 ${\mu}g/kg$($3{\sigma}$) and improved by 10 times. Isobaric interferences on Se is removed by Octopole Reactoin Cell and $H_2$ (3.8 mL/min) shows better performance over He. However, in case Br exists in a matrix, $H_2$ could induce interferences on m/z 80 and 82 ($^{80}[BrH]^+$ and $^{82}[BrH]^+$). The accuracy of this experiment is examined successfully by analyzing several reference materials. The results for several domestic grain analysis show that the concentrations are between 12.7 ${\mu}g/kg$ and 29.6 ${\mu}g/kg$.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.86-95
• /
• 1996

Rotary disc ultrafiltration module(RDM) was developed for the separation of oil e$$\mu$sions. This module was devised to reduce the gel polarization phenomenon by decoupling the operation pressure and the surface velocity of solution in ultrafiltration(UF) processes. The rotary disc membrane consists of 3mm-thick ABS plate covered with UF membrane (UOP, U.S.A.). When the angular velocity($\omega$) was increased, the pure water flux was slightly decreased due to pressure drop caused by centrifugal force and slip flow at the surface of membrane. The pressure drop was proportional to the square of linear velocity(${\omega}r$). When the angular velocity was changed from 52.36rad/s to 2.62rad/s, the flux decline for 5% cutting oil in one-shaft RDM at $25^{\circ}C$ and 0.1MPa was 30.16%. In the lower concentrations, angular velocity tends to give less effect on the flux. Flux(J; $kg/m^{2} \cdot s$) in a rotating disc module is mainly a function of the bulk concentration($C_{B}$; %), the linear velocity(${\omega}r$; m/s) and the effective transmembrane pressure($\Delta P_{T}$ ; Pa). Using a modified resistance-in-series model, the flux data of cutting oil experiments were fitted to give the following equation.

• Environmental and Resource Economics Review
• /
• v.15 no.3
• /
• pp.425-450
• /
• 2006

The index of energy intensity(energy/GDP) has been a primary policy concern since it can clarify industry sectors which use energy intensively and generate $CO_2$ emission heavily. Although energy intensity index may be suitable for estimating $CO_2$ emission from an isolated industry sector, we need an index for induced $CO_2$ emission since industrial activities are interconnected in terms of input and output. By employing Environmental Input-Output Table 2000, this paper analyses the flow of energy demand and pollutants after first estimating an induced $CO_2$ emissions from various industrial sectors and economic activities. The paper reports higher induced $CO_2$ emissions from industry sectors with larger energy intensity since they produces goods or services retaining relatively considerable environmental load. Furthermore, it is shown that environmental load and $CO_2$ emissions in overall economy are likely increasing when the products of energy intensive industrial sector is used as inputs for less intensive sectors' production process. The result suggests we need consistent policy efforts to reduce energy intensity to lower $CO_2$ emissions.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.726-731
• /
• 2005

Sedimentation is treated as the most important unit process in waterworks, and plays great role on turbidity removal efficiency. Rectangle sedimentation basin is the most widely accepted sedimentation process. But it has some problems with short-circuit flow and density flow caused by temperature and influent turbidity variation. To solve these problems, installation of rectification wall was suggested, but not generally fully accepted in field. Because hole of rectification wall cause jet flow. In this research, use of moving baffle was investigated. Moving baffle was designed to induce uniform velocity at every section of water flow. The baffle walls was made from soft fiber materials. The baffle walls with flow of sedimentation basin moves at same speed. It is like that it controls density flow and short-circuit flow and induce uniform velocity at every section of water flow in sedimentation basin. When moving baffle was operated retention time of sedimentation basin was extended to 1 hours. When it talked again and the effluent time of highest concentration of the chlorine ion from 100 minutes was extended to 160 minutes. Turbidity removal efficiency was tested with different operation modes(continuous and batch) with influent turbidity and retention time. It was revealed that turbidity removal efficiency carl be improved up to 36%(continuous mode) and 58%(batch mode) respectively. Consequently if moving baffle introduces in Rectangle sedimentation basin, it forecasts that the turbidity improvement above 30% will be possible.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.295-301
• /
• 2015

A theoretical analysis was carried out to examine the concentration behavior of methane from a biogas using a polysulfone membrane. After the governing equations were derived for the cocurrent flow mode in a membrane module, the coupled nonlinear differential equations were numerically solved with the Compaq Visual Fortran 6.6 software. At the typical operating condition of mole fraction of 0.7 in a feed stream, the mole fraction of methane in the retentate increased to 0.76 while the normalized retentate flow rate to the feed flow rate decreased from 1 to 0.79. When either the mole fraction of methane in a feed increased or the pressure of the feed stream increased, the methane mole fraction in the retentate increased. On the other hand, it was found that as either the membrane area decreased or the ratio of the permeate pressure to the feed pressure increased, the methane mole fraction in the retentate decreased. In case that the stage cut increased, the methane mole fraction in the retentate increased while the recovery of methane slightly decreased.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.316-325
• /
• 2008

An inductively coupled plasma mass spectrometry (ICP-MS) instrument equipped with flow injection-hydride generation system was used for the determination of trace arsenic in seawater sample. The accuracy in this method was verified by the analysis of certified reference materials (CRM) of seawater (CASS-4, NASS-5). The analytical results agreed with certified value within the range of uncertainty. The expanded uncertainties for CASS-4 and NASS-5 in this experiment were ranged from 6.2% to 6.8% obtained from repeated analyses of the CRMs (n=5). The detection limit of $As^+$ (m/z=74.9216) in this method was confirmed about 0.01 ug/kg. Linearity obtained from calibration curve of arsenic was excellent ($R^2=1$). The detection at $As^+$ (m/z=74.9216) and $AsO^+$ (m/z=90.9165) by using oxygen reaction gas in DRC mode was compared. Sensitivity at $AsO^+$ (m/z=90.9165) was decreased about 25-fold, but the analytical results are the same that at $As^+$ (m/z=74.9216).

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.194-201
• /
• 2021

Induced polarization (IP) effect is known to be caused by electrochemical phenomena at interface between minerals and pore water. Spectral induced polarization (SIP) method is an electrical survey to localize subsurface IP anomalies while injecting alternating currents of multiple frequencies into the ground. This method was effectively applied to mineral exploration of various ore deposits. Titanomagnetite ores were being produced by a mining company located in Gonamsan area, Gwanin-myeon, Pocheon-si, Gyeonggi-do, South Korea. Because the ores contain more than 0.4 w% vanadium, the ore deposit is called as Gwanin vanadiferous titanomagnetite (VTM) deposit. The vanadium is the most important of materials in production of vanadium redox flow batteries, which can be appropriately used for large-scale energy storage system. Systematic mineral exploration was conducted to identify presence of hidden VTM orebodies and estimate their potential resources. In geophysical exploration, laboratory geophysical measurement of rock samples is helpful to generate reliable property models from field survey data. Therefore, we performed laboratory SIP data of the rocks from the Gwanin VTM deposit to understand SIP characteristics between ores and host rocks and then demonstrate the applicability of this method for the mineral exploration. Both phase and resistivity spectra of the ores sampled from underground outcrop and drilling cores were different of those of the host rocks consisting of monzodiorite and quartz monzodiorite. Because the phase and resistivity at frequencies below 100 Hz are mainly dependent on the SIP characteristics of the rocks, we calculated mean values of the ores and the host rocks. The average phase values at 0.1 Hz were ores: -369 mrad and host rocks: -39 mrad. The average resistivity values at 0.1 Hz were ores: 16 Ωm and host rocks: 2,623 Ωm. Because the SIP characteristics of the ores were different of those of the host rocks, we considered that the SIP survey is effective for the mineral exploration in vanadiferous titanomagnetite deposits and the SIP characteristics are useful for interpreting field survey data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.456-466
• /
• 2010

Typical combustion instability such as DC-Shift found in the hybrid rocket motor is characterized by non-linearity. DC-Shift can occur in two different realizations. One is so-called a positive shift of measured DC voltage where the pressure increase suddenly. The other is a negative shift where the pressure drops abruptly. In the present work, specifically the negative DC-Shift was investigated to analyze the effect of oxidizer flow condition and the resonance between fundamental frequency and other ones, such as Helmholtz frequency, and acoustic frequency. Results show a peak frequency of several hundreds HZ shifts as combustion proceeds. A negative DC-shift was found as the result of phase cancellation between two dominant frequency, combustion frequency and flow related frequency. Still is it required to study further to identify the change of dominance of frequency during the combustion.

• Journal of the Korea Convergence Society
• /
• v.7 no.4
• /
• pp.191-198
• /
• 2016

As the electricity produced from the electricity industry, a national key industry in Korea, are supplied to other industries as an intermediate goods, the supply shortage of electricity industry has a large impact on the national economy. This paper attempts to analyze the supply shortage effects which are defined as the negative impact of one won of supply failure in the electricity on the production of other industries. To this end, an input-output analysis using an input-output (I-O) table describing inter-industry flow of intermediate goods is applied. More concretely, the supply-driven model is applied subject to the OECD countries. The value of the supply effects interfere with Denmark's best large 1.682 was followed by South Korea, Japan, Australia, the UK.