본류부에서 지류부로 유입되는 흐름의 내측 벽면에는 토사나 오염물의 퇴적물침전이 발생하게 된다. 이는 개수로 분류흐름의 특성으로 인하여 이차류 흐름이 나타나는 분리구역이 발생하기 때문이다. 수치모의를 실행하여 Hsu 등(2002)과 Ramamurthy 등 (2007)의 분류흐름 수로의 결과값과 수치모의를 통한 결과를 비교하여 신뢰성이 높음을 알 수 있었다. 본 연구에서는, 분류흐름에서 발생하는 분리구역을 줄이기 위해 분류가 시작되는 본류의 수로의 크기 조절을 통하여 분리구역의 크기를 줄였다. 또한 변형으론 인한 분리구역을 줄이기 위해 본류와 지류가 만나는 모서리 지점을 곡선과 대각선으로 연결하여 유수흐름을 완만하게 만든 지형들을 제안하였다.
Journal of the Korean Society of Hazard Mitigation
/
v.9
no.2
/
pp.53-57
/
2009
The dividing flow in an open channel has a number of distinctive characteristics. One of these is that the separation zone interacts with a secondary motion along the inner wall of a branch channel, generating sediment accumulation. To investigate this phenomenon, a two-dimensional numerical model based on the shallow-water equations, RMA2, which calculates water surface elevations and horizontal-velocity components, was used to analyze the dividing flow. The obtained numerical results fully coincide with the laboratory measurements reported by Hsu et al.(2002). For the analysis of the numerical results, a separation zone-discharge rate relationship was proposed. To reduce the size of a separation zone, the topographies of diagonal and curved edges were proposed, smoothly connecting the upstream corner to branch channel.
Proceedings of the Korea Water Resources Association Conference
/
2019.05a
/
pp.257-257
/
2019
최근 기후변화에 따른 대응을 위해 기존 수자원 활용의 고도화 및 배수능력 증대를 위해 다양한 방안이 추진되고 있으며, 그에 따라 기존 개수로에 신규 수로를 연결하여 합류와 분류를 시키는 사례가 증가하고 있다. 특히 신규 개수로 연결을 위한 분류부 형상은 관련 설계기준, 분류유량의 규모, 해당 지점의 하상변동 경향, 지형여건, 흐름 분류시설 및 구조물의 형태(양수펌프장, 스크린이나 수문, 암거설치)와 같은 구조적 요인 등에 의해 달라지지만, 이와 관련된 연구가 매우 부족한 실정이다. 따라서 본 연구에서는 2차원 수치모형을 이용하여 분류부 평면형상 변화에 따른 분류유량비와 흐름분리구역 분포 등에 대한 흐름특성을 분석하고 이수와 치수계획 수립 등에 활용하고자 한다. 본 연구에서는 TELEMAC-2D 모형을 이용하여 주수로 상류 유입흐름의 프루우드 수가 0.74, 0.52인 두 흐름에 대해 형상변화 폭을 주수로 폭(B)의 1B, 주수로 형상변화를 급확대, 점진적 확대 구간길이를 1B~3B로 변화시키며 분류유량비(분류수로 유입유량/상류 유입유량)와 흐름분리구역의 위치와 크기 등에 대한 분석을 수행하였다. 분류부 상류 유입흐름의 프루우드 수가 0.74, 분류유량비는 0.33인 흐름은 주수로 형상변화 구간길이가 1B 일 때 0.44~0.46, 3B일 때 0.54~0.60으로 점차 분류유량비가 증가한다. 반면 상류 유입흐름의 프루우드수가 0.52, 분류유량비가 0.52인 흐름은 주수로 형상변화 구간길이가 1B일 때 0.77~0.82에서 3B일 때 0.70~0.80으로 점차 분류유량비 증가율이 감소하는 경향을 나타내게 된다. 주수로 형상변화 폭을 0.5B, 1B로 달리하여 수로 형상변화를 시킨 경우 분류유량비 증가율은 각각 135~162%, 134~176%로 나타났으며, 이는 수로 형상변화 폭보다 변화구간 길이가 더 큰 분류유량비 변화에 영향을 미치는 것을 확인할 수 있다. 흐름분리구역은 상류 유입흐름의 프루우드 수가 0.74인 경우 수로형상 변화구간과 분류수로 입구에 형성되지만, 상류유입흐름의 프루우드 수가 0.52인 경우 수로형상변화 구간과 주수로 하류에도 형성된다. 수치실험 결과 동일수로 폭 직사각형 $90^{\circ}$ 분류수로에서 분류부 평면형상의 변화에 따라 주수로 하류방향흐름의 관성력은 감소하는 반면 분류수로로 향하는 횡압력경사와 흐름분리구역 발생위치 변화로 인해 분류 수로내 통수능이 증가하여 분류유량비가 급격하게 증가하게 된다. 또한 분류부 상류 유입흐름의 관성력이 작은 경우 분류부 평면형상 변화시 주수로 하류방향에서도 흐름분리구역이 형성되고 주수로 종방향 수위가 상승함에 따라 분류흐름 계획수립 시 세심한 주의가 필요하다.
Journal of the Korean Society of Hazard Mitigation
/
v.6
no.1
s.20
/
pp.59-68
/
2006
Flow separation of recirculation zone by increasing of flow and change of its direction at confluence results in backwater due to conveyance reduction. The hydraulic characteristics of flow separation are analysed by experimental results of flow ratios of tributary and main streams and approaching angles. The boundary of flow separation by dimensionless length and width is defined by the streamline of zero and this definition agrees well to the existing investigation. Because flow separation doesn't appear in small flow ratio and approaching angle of $30^{\circ}$, the equation of flow separation with flow ratio and approaching angle is provided. In flow separation consideration and comparing with previous results, the existing equations of dimensionless length and width ratios by function of approaching angle, flow ratio, and downstream Froude number are modified and also contraction coefficient and shape factor are analysed. Dimensionless length and width ratios are proportional to the flow ratio and approaching angle. In analysis of water surface profiles, the backwater effects are proportional to the flow ratio and approaching angle and the magnitude at outside wall is greater than that of inside wall of main stream. The length, $X_l$ from the beginning of confluence to downstream of uniform flow, where the depth is equal to uniform depth, is characterized by width of stream, flow ratio, approaching angle, and contraction coefficient. The ratios between maximum water depth by backwater and minimum depth at separation are analysed.
Jung, Dae Jin;Kim, Won hee;Jang, Chang-Lae;Jung, Kwan Sue
Proceedings of the Korea Water Resources Association Conference
/
2016.05a
/
pp.341-341
/
2016
2차류는 주흐름 방향 유속에 비하여 작지만 유속을 재분포 시켜 흐름의 교란을 발생시키는 매우 중요한 인자이다(Woo, 2001). 2차류는 만곡부, 합류부, 분류부에서 흐름분리와 함께 나타나는 흐름특성 중 하나이지만 각 지점별로 2차류의 분포는 서로 상이하다. 하지만 국내에서는 만곡부에서의 2차류에 대한 영향에 대해서만 주로 연구가 이루어졌으며, 합류부와 분류부에 대해서는 연구가 아직 체계적으로 이루어지지 못하고 있는 실정이다. 따라서 본 연구에서는 합류부와 분류부에서 2차류 영향을 고려한 2차원 수치모형을 적용하여 흐름특성 변화를 수치모의 하였다. 2차류 흐름을 고려한 수치모의를 위해 TELEMAC-2D 수치모형을 이용하였으며, 2차류의 영향을 고려하지 않고 계산한 SUPG기법을 적용한 모의결과에 대하여 Bernard and Schneider(1992)가 제안한 경험계수를 적용 후 그 결과를 실험결과와 비교분석하였다. 합류부(confluence)에서는 본류와 지류의 유량비가 증가할수록 흐름분리구역 길이와 최대폭이 증가하지만, 분류부(Bifurcation)에서는 분류수로 유량비가 증가할수록 흐름분리구역 길이와 최대폭이 감소하는 것을 확인할 수 있었다. 특히, 2차류를 제외한 수치모의에서 실내시험에서 제시한 분류유량비와 수심 및 유속분포를 동시에 충족시키기 어렵다. 반면 2차류 영향을 고려시 분기수로내 통수능을 감소시키는 흐름분리구역과 2차류의 상호작용에 의한 흐름정체효과로 분류유량비가 감소하였으며, 2차류 영향을 고려하여 모의한 결과 분류부 수치모의의 안정성과 정확성을 향상되었다. 하지만 본 모형에서 적용한 2차류 흐름관련 매개변수는 흐름특성에 따라 시행착오법에 따라 산출해야 하는 특성 때문에 향후에 추가적인 연구가 필요하다.
This study investigates variation of flow characteristics due to variation of branch channel width and discharge ratio at bifurcation channel using 2D numerical model. The calculated result considering secondary flow is more accurate and stable than without considering one. The diversion flow rate ($Q_3/Q_1$) is reduced by flow stagnation effect according to the interaction of the secondary flow and flow separation zone in branch channel. The less upstream inflow or the lower upstream velocity, the bigger variation of diversion flow rate by changing branch channel width. At uniform downstream boundary condition, the rate of change in Froude number of downstream of main channel($Fr_2$)-diversion flow rate ($Q_3/Q_1$) relations is similar about -2.4843~-2.6675 when branch channel width ratio (b/B) is decreased. At uniform diversion flow rate ($Q_3/Q_1$) condition, the width of recirculation zone in branch channel is decreased when branch channel width ratio (b/B) is decreased. The less upstream inflow in the case of increasing branch channel width or the narrower branch channel width in the case of increasing upstream inflow, the bigger reduction ratio of recirculation zone width. At uniform inflow discharge ($Q_1$) condition, diversion flow rate, the width and length of recirculation zone in branch channel are decreased when branch channel width ratio (b/B) is decreased.
This study investigates changes of bifurcation discharge ratio, flow velocity distributions and characteristics of separation zone due to variation of bifurcation angle by using TELEMAC-2D model. When the bifurcation angle is reduced from 90° to 45° without changing the boundary conditions, the bifurcation discharge ratio increased by 1.5 times from 0.523 to 0.785 because of increasing the radius of curvatures, the inertia force of the downstream flow, and the pressure gradient by the downstream boundary conditions. The bifurcation discharge ratio increases non-linearly whenever the bifurcation angle decreases by 15° intervals from 90° to 45° in flow with the upstream Froude number of 0.45 to 0.74. In flow with a maximum Froude number of 0.74, the rate of increase for bifurcation discharge ratio is 31.1% and the minimum value. When the Froude number is 0.58, the bifurcation discharge ratio is 0.7 or less, and the maximum rate of increase for that ratio is 53.5%. As the upstream Froude number decreases less than 0.58, the bifurcation discharge ratio exceeds 0.7, and the rate of increase decreases. When the upstream Froude number is 0.4 higher, the dimensionless width and length changing ratio of the separation zone are about 2.56 and 5.5 times higher than in 0.4 or less.
This study investigates the flow characteristics, such as velocity distributions, size and location of recirculation zone, longitudinal flow change rates, and bifurcation discharge ratio in the bifurcation channel by TELEMAC-2D, a 2D numerical model. The numerical model is validated by previous experimental results and the numerical results are in relatively good agreement with the experimental results, such as the water surface elevation and velocity distribution in the channels. As the inertial force and moment in the main channel decrease, the bifurcation discharge ratio increases, and the relative high velocity distribution becomes wider and the reverse velocity of the main stream decreases in the branch channel. As the bifurcation discharge ratio increases, the size of the recirculation zone in the branch channel decreases and it can be more clearly calculated by determining the point where the longitudinal froude number $Fr{\approx}0$ as well as drawing the distribution of the streamline distribution.
Proceedings of the Korea Water Resources Association Conference
/
2009.05a
/
pp.678-682
/
2009
하천의 합류부에서는 홍수시 침수피해가 빈번하게 발생 하거나 하안침식, 강턱붕괴, 하천의 장갑화 등의 악영향이 발생하는데, 이러한 현상의 원인 규명을 위해 본류와 지류의 유량비에 의해 혹은 지류의 유입각에 의해 다양한 흐름 특성을 가정하고 개수로 장치를 이용하거나 수치모형 실험을 통하여 연구되고 있다. 본 연구에서는 미시시피 대학 연구기관인 NCCHE(Natioanl Center for Computational Hydroscience an Engineering)에서 개발한 CCHE2D 2차원 수치모형을 이용하여, 개수로 합류부에서 흐름 및 하상변동 특성을 분석하였다. 수치모의 결과는 "Experiments on Flow at a $90^{\circ}$ Open-Channel Junction", Journal of Hydraulic Engineering, May 2001, Vol. 127, No. 5, 340-350.에 기재되었던 논문의 실내실험 결과와 비교분석하였으며, 유속의 분포는 $0.01{\sim}1.0$ m정도로 개수로 관측치와 비교적 유사하게 모의 되었다. 또한 하상 변동 모의 결과 Biron 등(1996)이 제안한 합류부에서 6구역의 흐름 정의도와 대체적으로 유사하게 모의 되었으며, 최대 유속 구간에서 $-0.2m{\sim}0.03m$의 침식이 발생하고, 정체 구간과 분리구간에서 $0.01{\sim}0.02m$의 퇴적이 발생하였다. 본 연구의 결과는 하천의 물리적 특성을 파악하고 하천공사나 수리구조물 설계의 기초 자료로 활용될 수 있을 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.