• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.130-137
• /
• 1996

본 연구는 정적 및 동적하중 재하상태에서 배합조건을 달리한 콘크리트의 파괴특성을 조사하고자 3점 휨 실험을 실시하였다. 실험은 물-시멘트비를 일정하게 유지한 상태에서 슬럼프 값을 변화시키는 경우와 슬럼프 값을 일정하게 유지하면서 물-시멘트비를 변화시키는 경우로 구분하여 배합비를 달리한 6가지 배합형태의 무근콘크리트 시편 54개를 제작하였다. 실험결과에 의하여 콘크리트의 파괴에너지(Gf)와 특성길이(lch)를 구한 수 이를 강도특성(f'c, fsp , Ec, ff)과의 상관관계를 규명하고 파괴에너지(Gf)를 이용한 배합설계의 타당성을 검토하였다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.21-26
• /
• 2006

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between rollers was developed. The theory and calculating equation were presented, and the theoretical maximum error associated with the equation was also presented. We called the stiffness measured by Taber tester as 'Taber stiffness', and by wrinkling behavior as 'wrinkle stiffness', respectively, for comparison. By using this method, on-line complete control of paper stiffness will be possible in near future. Special care about shear wrinkle and paper dimensional effects were addressed.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.467-474
• /
• 2003

Composite action can be achieved by providing shear connectors between the steel top flange and concrete topping. Composite sections are stiffer than the sum of the individual stiffness of slab and beam. They can therefore carry heavier loads or similar loads with appreciably smaller deflection. They are also less prone to transient vibration. In this study, T-type Steel Composite beam (TSC-beam) was developed and tested. The test results of TSC beam were compared with the theoretical results based on composite actions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.44-51
• /
• 2004

The effect of refining conditions and grammage on the stiffness of linerboard was investigated. The correlations between Taber stiffness and resonance stiffness were very low due to the different measuring principle. The refining conditions did not affect sig nificantly on both Taber and resonance stiffness estimated here. This means that it is strongly recommended to find and apply the refining conditions which can reduce specific energy consumption. Taber stiffness showed very high correlation for the thickness and elastic modulus of linerboard, while the resonance stiffness showed much lower correlation. Effective thicknesses for Taber stiffness were very well fitted with measured thickness, while those for resonance stiffness depended on the grammage of linerboard.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.77-78
• /
• 2009

This study is to consider the character of cables in six World-Cup stadiums constructed in 2002 in Korea and to inspect problem on application of existing theory. The result of experiment shows that it is possible to determine the tension force of the real cables with an accuracy of 10${\sim}$60 by taking the cable bending stiffness. However, the reliance of the tension force experimentally determined could be changed in tension in the cable.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.429-432
• /
• 2003

MMA-modified fiberglass-reinforced plastic composite pipe was produced by using the binder of MMA-modified unsaturated polyester resin in which low viscosity MMA was added to unsaturated polyester resin. Sixteen specimens were made of polymer mortar and fiberglass-reinforced plastic by the centrifugal method. For these specimens the external strength tests were carried out by taking the core thickness consisting of polymer mortar and the fiberglass content per unit area as experimental variables to figure out the effect of variations of these variables influencing on flexural rigidity that is an important property for the composite pipe. Results of this study are believed to provide the basic data for more economical and practical design of MMA-modified fiberglass-reinforced plastic composite pipe.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.13-22
• /
• 2001

지진하중을 받는 다경간 단순형교의 낙교방지대책으로 적용되는 cable restrainer를 적절하게 설계하기 위해서는 restrainer의 보강효과에 대한 분석이 우선적으로 이루어져야한다. 본 연구에서는 단순지지 다경간 교량시스템을 중심으로 restrainer로 보강된 교량의 보강효과와 다양한 교량의 영향 요소를 고려할 수 있는 단순화된 해석모형을 개발하였으며, 이를 바탕으로 대상교량의 인접 진동계간의 상대거리, 충돌력, 하부교각으로 전달되는 전단역과 휨모멘트의 변화 등의 동적거동특성을 조사하여 restrainer의 보강효과를 분석하였다. 또한, restrainer의 여유길이 변화, 강성변화, 그리고 restrainer 길이변화에 따른 응답특성을 분석하였다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.21-28
• /
• 2007

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between two rollers was presented. The theory and the equation were presented, and lab and mill tests were executed. We called the stiffness measured by Taber tester as 'Taber stiffness', and by tension wrinkling measurement as 'wrinkle stiffness', respectively. Lab experimental results showed Taber and wrinkle stiffness are almost equivalent. In the mill experiment, we could measure the stiffness in the wet state and in the dry state. The dry wrinkle stiffness was close to the taber stiffness, but the wet wrinkle stiffness was much lower than the corresponding taber stiffness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.121-126
• /
• 2002

In a recent construction industry, cable supported structures such as a cable-stayed bridge or space stadium have been increasingly constructed. Generally the stay cables as a critical member should be adjusted to be satisfied with the design tension forces. In this purpose, a vibration method has been applied to estimate the tension forces exerted to the existing stay cables. In this study, cable vibration tests were carried out to estimate the cable tension forces comparing with theoretical and practical formulas. From the measured frequencies obtained from free vibration and impulsive tests, the accuracy of 1he estimated tension forces is confirmed according to use only the first single mode or higher multiple modes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.942-945
• /
• 2002

A garter spring, which is a long. special, close-coiled extension spring with its ends joined to form a ring, is used in connection between vacuum circuit breaker and bus bar in switchgear. To carry short-time current and resist welding at the contact surface in the connection, the garter spring must transmits an uniform contact force to the contact surface through the contact chips arranged in the circumference of bus bar. In this paper, the system for measurement of the contact force by the garter spring is developed. Using the developed measurement system, the design of the connection structure including the garter spring is reviewed to obtain the uniform contact forces in all of contact chips.