• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.352-359
• /
• 2015

This study was conducted to evaluate how the special protection area designations of degraded trails effect on the soil and vegetation recovery of degraded trails. The study areas were established on an opened trail and a 16-year closed trail, which was prohibited to enter after the designation as a special protection area for recovery, at Bukhansan National Park. Soil core sampling and measurements of vegetation cover were performed to compare soil and vegetation properties of the trails. Soil bulk density increased and soil water total nitrogen decreased on the opened trail, while no significant differences were found on bulk density, soil water, total nitrogen, acidity, and organic matter on the closed trail. On the opened trail, vegetation cover was seemed to be degraded, because vegetation litter cover ratio was low and barren rock cover ratio was high. On the closed trail, litter rock barren cover ratio of the closed trail was recovered, but only limited recovery was found on vegetation cover by applying environmental damage condition rating class. In conclusion, the closed trail was recovered by designation of special protection area, while difference in recovery progress of soil and vegetation was found. Therefore, designation of special protection area of degraded area should be based on scientific basis of recovery characteristics of the area. In order to improve the effectiveness of special protection area system, further specific standards for special protection area designation and management would be needed, considering ecological and social importance of target areas.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.55-55
• /
• 2017

본 연구는 파프리카를 자동 수확하기 위한 시스템 개발의 일환으로 수확작업기의 절단장치를 설계하고자 파프리카 과병의 절단특성을 분석하고자 하였다. 파프리카 과병의 절단특성을 분석하기 위하여 사용한 파프리카는 경기도 평택시에서 재배된 파프리카를 사용하였다. 적색 품종인 Nagano RZ와 황색 품종인 Helsinki, 주황색 품종인 Boogie를 사용하였다. 파프리카 과병의 절단 특성을 분석하기 위하여 상기 세 가지 품종의 파프리카 30개씩 총 90개의 파프리카를 사용하여 과병의 중앙 지점을 절단하였다. 절단 특성을 측정하기 위하여 push-pull gauge인 digitect dtg-20을 사용하였으며, 파프리카의 과병의 절단 특성을 측정하기 위하여 일반 농가에서 사용하는 접도 OLFA CK2의 접도의 칼날을 digitect dtg-20에 장착하여 측정하였다. 파프리카 과병의 절단 특성의 시험 항목은 절단강도를 측정하였다. 파프리카의 과병의 절단 특성 측정은 수확작업기의 파프리카 과병의 절단을 위한 절단장치의 설계를 위하여 진행하였다. 파프리카 과병의 절단 특성은 파프리카의 훼손을 최소화한 수확작업을 위한 중요한 요소이다. 파프리카의 과병의 중앙을 절단하여 절단강도와 절단력을 측정하였다. 그 결과 파프리카 과병의 절단강도는 $4.18{\pm}1.18kgf$로 나타났으며, 최대값은 6.91kgf, 최소값은 2.26kgf로 나타났다. 파프리카 과병은 측정된 절단강도의 최대값인 6.91kgf보다 큰 힘을 이용하여 절단하여야 하므로 그에 맞게 수확작업기의 절단장치의 모터를 선정하고 설계가 이루어져야 한다고 판단한다.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.165-173
• /
• 2020

ABS and PLA are applied for restoring missing part of damaged ceramics, but are not similar to the material of ceramics, so this study conducted a research on the properties and applicability of ceramic resin. This study conducted actual restoration of ABS and ceramic resin as well as cast restoration method with experiment of properties. Results show that manufacturing of restored part showed higher precision than existing materials, which enables printing of tiny shapes showing excellent surface texture and gloss than L30 and ABS resin. As a result of measuring properties, the material showed excellent durability than existing materials with no contraction and deformation and compressive strength, but value of specific gravity and hardness can lower processability after manufacturing. Long-term monitoring, evaluation of reliability of ceramic resin applied in this study, additional researches on the restorability of the original shape when printing too thin or long restored part are needed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.883-890
• /
• 2017

Among the augmented reality services, the most frequently used services are marker based augmented reality services. However, there is a problem that the augmented reality service can not be provided in an environment in which the marker image can not be recognized. In this paper, we propose a method to provide more stable service by estimating the user's posture even if the marker image can not be correctly recognized due to occlusion, obstacle or marker damage in the marker based augmented reality. In the proposed method, when a failure occurs in the provision of a marker based augmented reality, the attitude of the user is estimated using the 3-dimensional coordinates measured through communication between the three beacons and the user, and it allows the user to receive the augmented reality service continuously. We describe the scenario of augmented reality technique using proposed marker recognition and beacon communication, and present the results of experiments based on the degree of occlusion and damage.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.35-45
• /
• 2013

The Clay Statues of Donggwanwangmyo Shrine (Treasure No. 142) are highly damaged physical weathering which are crack, exfoliation. Pigment of surface are discolored by chemical weathering like dust. The result of ultrasonic velocity measurement, low velocity zone was measured the lowest part of Woojanggun Statue. Deficiency condition of pigment layer was evaluated quantitatively through infrared Thermography. As a result, exfoliation part was detected at high temperature. Making techniques of the Clay statues were identified by gamma rays, infrared TV, SEM. All Clay Statues were founded on wood base and joints of wood were fixed using thin iron wires. After wood base was twisted a straw rope, it was made by clay. Clay was blended with rice straw to prevention of crack and exfoliation. The upper side of clay layer was coated with Hanji(Korean handmade paper) and cotton in order to isolate the pigment layer.

• Journal of Conservation Science
• /
• v.28 no.1
• /
• pp.39-52
• /
• 2012

The Usuki Stone Buddha Statues in Oita are consisted of 60 Buddhas which represent of Japan carved on the rock-cliff in the 12 to 14th centuries. The basement rock of the statues is dark gray welded lapilli tuff that containing the Aso-4 pyroclastic rock group. Deterioration maps for the Hoki I and the Furuzono Buddha Statues group show multi-directional fissures on the Cakra, and sheeting-off zone at the margin of uprising water. Deterioration rate of the Hoki I group was calculated fissure about 121 in number, 19% of sheeting-off zone and 51% of biological weathering in surface of area. And the Furuzono group was also evaluated as about 48 of fissures in number, 24% of sheeting-off zone and 41% biological weathering. The slope stability assessment results, the Hoki I developed discontinuous planes has possibility of planar, toppling and wedge failures in all caves. Ultrasonic velocity of the Aizen-myooh (basement rock) ranges from 1,520 to 2,794 (average 2,298m/s). And pedestal of Amita-yeorae which has been replaced by new fresh rock is measured as 3,242 to 4,141 (average 3,813m/s). Therefore, we establish of planing conservation treatment and reinforcement methods to fissure, cavity, sheeting-off zone in the Buddha surface.

• Journal of Software Assessment and Valuation
• /
• v.12 no.2
• /
• pp.1-8
• /
• 2016

In this paper, we study abstracting and identifying license file from a package to prevent unintentional intellectual property infringement because of lost/modified/confliction of license information when redistributing open source software. To invest character of the license files, we analyzed 322 licenses by n-gram and TF-IDF methods, and abstract license files from the packages. We identified license information with a similarity of the registered licenses by cosine measurement.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.535-549
• /
• 2022

Damage to forests, such as broken or falling trees, has increased due to the increased intensity and frequency of abnormal climate events, such as strong winds and heavy rains. However, it is difficult to respond to them in advance based on prediction since structural defects such as cavities and bumps inside trees are difficult to identify with a visual inspection. Non-invasive sonic tomography (SoT) is a method of estimating internal defects while minimizing physical damage to trees. Although SoT is effective in diagnosing internal defects, its accuracy varies depending on the species. Therefore, it is necessary to analyze the reliability of its measurement results before applying it in the field. In this study, we measured internal defects in wood by cross-applying destructive resistance micro drilling on old Pinus densifloraSiebold & Zucc. and Ginkgo bilobaL., which are representative tree species in Korea, to verify the reliability of SoT and compared the evaluation results. The t-test for the mean values of the defect measurement between the two groups showed no statistically significant difference in pine trees and some difference in ginkgo trees. Linear regression analysis results showed a positive correlation with an increase in defects in SoT images when the defects in the drill resistance graph increased in both species.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.101-114
• /
• 2011

The rock-carved Buddha statue at Dosolam (Korea Treasure No. 1200) of the Seonunsa temple in Gochang is unique style sculptured on natural rock cliff of 13.0m height. The Buddha statue is composed of volcanic complex with tuff, dacitic tuff breccia, tuff bereccia and lithic tuff. Especially, the Buddha statue is characterized by hydrothermal alteration and fragmentation on the upper and lower part. As a result of damage diagnosis, exfoliation and detachment of physical weathering are high of 11.3% and 9.3%, respectively. Infrared thermography analysis, exfoliation and micro-cracks occurred in the measuring parts that have not been confirmed by naked eyes. Chemical index of alteration and weathering potential index of host rock for the Buddha statue are 55.16 to 64.01 and 6.14 to 9.92 which are represented within highly weathering degree. In surface, dark black, reddish brown and white discoloration are observed prominently in the lower. Brown discoloration 6.9% is highest. According to the P-XRF measurements, high concentration of Fe in common, in part of dark black discoloration was Mn, white and brown discoloration in part of S and Ca content were higher. Biological weathering that yellowish brown and dark gray crustoes lichenes appeared by 20.8% and 13.3%, respectively. Therefore, comprehensive deterioration rate of Buddha statue show physical damage by 21.2%, discoloration for inorganic contaminants by 10.8% and biological damage by 39.4%. Ultrasonic velocity measurement carried out of Buddha statue on the surface by 555 points. Measured value of ultrasonic velocity was about 2,273m/s(1,067 to 3,215m/s, and weathering coefficient is 0.5(0.4 to 0.8) that progress on MW(moderately weathered) to HW(highly weathered) grade of rocks.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.17-24
• /
• 2013

The localization accuracy in wireless sensor networks using ranging-based localization algorithms is greatly influenced by the ranging accuracy. Software implementation of HAL(Hardware Abstraction Layer) and MAC(Medium Access Layer) should seamlessly deliver the raw performance of ranging-based localization provided by hardware capability fully to the applications without degrading the raw performance. This paper presents the design and implementation of the software stack for IEEE 802.15.4a which supports normal ranging mode of the Nanotron's NA5TR1 RF chip. The experiment results shows that average ranging error rate with our implementation is 24.5% for the normal mode of the SDS-TWR ranging scheme.