• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.39-45
• /
• 2008

The most important elements in flexible pavement design criteria are stress and strain distributions. To obtain reasonable stress and strain distributions in pavements, moving wheel loads must be applied to analyze the pavement responses. In this study, finite element analysis was used to identify the three-dimensional states using the vehicle load into a constant-position / time-variable load (25, 50 and 80km/hr). In an elastic system, the strain is the same in both longitudinal and transverse directions under a single wheel. However, the same is not necessary in a viscoelastic system. Test results showed that the maximum values between transverse and longitudinal strains the bottom of asphalt concrete base layers under 25km/hr were were about 40 percent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.475-475
• /
• 2023

직경 5 mm 이하의 미세플라스틱은 인류 활동에 의해 생산되어 하수처리장 처리수, 우수토구, 도로 분진 등 다양한 경로를 통해 하천에 유입되고 있다. 하천에 유입된 미세플라스틱은 하천흐름을 따라 하류로 이동하여 해양환경에까지 이른다. 미세플라스틱은 수체를 따라 이동할 뿐 아니라 수생생물에 의해 섭식되기도 하여 인체 위해성이 우려되는 상황이다. 특히 서울과 경기도의 주요 상수원인 팔당호는 북한강, 남한강, 경안천이 유입되어 형성되기 때문에 미세플라스틱의 유입에 따른 이송-분산 거동 평가가 중요한 영역이다. 본 연구에서는 준3차원 입자추적기법을 이용한 미세플라스틱 거동해석 모형, MPT-Q3D를 개발하였으며 팔당호 내 미세플라스틱의 거동 특성을 분석하였다. MPT-Q3D 모형은 2차원 흐름해석모형과 연계한 입자의 준3차원 거동해석을 위해 step-by-step computation method를 적용하였으며, 전단류에 의한 입자의 수평거동과 난류확산에 및 침강속도에 의한 연직거동 두 단계 계산과정에 따라 입자의 거동을 해석했다. 전단류는 2차원 흐름해석결과로부터 유속의 연직분포식을 적용하여 생성하였으며, 생성된 전단류에 의해 각 연직층 별 유속이 계산되고 𝚫t 이후 입자의 종, 횡 방향 이동거리를 계산한다. 또한 난류확산에 의한 무작위적 거동 계산을 위해 Gaussian 분포를 따른 난수 생성을 통해 무작위적 거동을 계산했다. 각 연직층에 위치한 미세플라스틱 입자의 종, 횡 방향 거동을 계산한 후 입자의 연직거동을 계산한다. 입자의 연직 위치는 난류확산과 침강속도에 따라 계산되며 침강속도는 미세플라스틱의 밀도 및 직경에 따라 결정된다. 현장 샘플링 결과에 따라 팔당호로 유입되는 미세플라스틱은 폴리스틸렌(PS), 폴리에틸렌(PE), 폴리에스테르(Polyester)가 있으므로, 세 종류의 미세플라스틱을 동시에 주입하여 팔당호 내 거동을 분석했다. 남한강, 북한강, 경안천의 유량 차이로 인해 팔당호로 유입되는 미세플라스틱은 대체로 남한강과 북한강의 흐름특성에 영향을 받았다. 경안천의 경우 유량이 낮아 팔당호로 유입되지 못하고 좌안을 따라 하류로 이동됐다. 남한강과 북한강에서 유입된 미세플라스틱은 주로 팔당호 내 소내섬을 거쳐 팔당댐 쪽으로 이동했다. 또한 팔당댐 인근에서는 PP, PE, Polyester 순으로 많은 양이 유입되는 결과가 나타났다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.33-39
• /
• 2004

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos and crew's fatigue. Therefore a ship equipped with anti-rolling devices are on an increasing trend. In this research, we developed a free running model ship to evaluate the performances of fin stabilizer and moving weight stabilizer. Also those performance tests were carried out through the proposed test procedure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.3
• /
• pp.338-348
• /
• 2004

The present study is conducted to investigate the effect of rib arrangements on an impingement/effusion cooling system with initial crossflow. To simulate the impingement/effusion cooling system, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of tile hole diameter. Initial crossflow passes between the injection and effusion plates, and the square ribs (3mm) are installed on the effusion plate. Both the injection and effusion hole diameters are 10mmand Reynolds number based on the hole diameter and hole-to-hole pitch are fixed to 10,000 and 6 times of the hole diameter, respectively. To investigate the effects of rib arrangements, various rib arrangements, such as 90$^{\circ}$transverse and 45$^{\circ}$angled rib arrangements, are used. Also, the effects of flow rate ratio of crossflow to impinging jets are investigated. With the initial crossflow, locally low transfer regions are formed because the wall jets are swept away, and level of heat transfer rate get decreased with increasing flow rate of crossflow. When the ribs are installed on the effusion plate, the local distributions of heat/mass transfer coefficients around the effusion holes are changed. The local heat/mass transfer around the stagnation regions and the effusion holes are affected by the rib positions, angle of attack and rib spacing. For low blowing ratio, the ribs have adverse effects on heat/mass transfer, but for higher blowing ratios, higher and more uniform heat transfer coefficient distributions are obtained than the case without ribs because the ribs prevent the wall jets from being swept away by the crossflow and increase local turbulence of the flow near the surface. Average heat transfer coefficients with rib turbulators are approximately 10% higher than that without ribs, and the higher values are obtained with small pitch of ribs. However, the attack angle of the rib has little influence on the average heat/mass transfer.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.269-277
• /
• 1998

Laboratory flume experiments to investigate the characteristics of the flows and local scour around circular bridge pier in a curved channel are performed. In this study, the effect of a circular collar device for controlling the depth of scour is examined. The scour depth with a collar is about 40% of the scour depth without collar in the straight course of the flume while it is about 44% of the scour depth without collar at the location of 150' in the curved channel. As the results of experiments using the collar of which diameter is twice of pier, the reduction of scour depth is the most effective in a straight channel when the location of collar is 0.2h( h:depth) below the channel bottom. And, the reduction of scour depth is the most effective in a curved channel when the location of collar is 0.1h below the channel bottom.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.13-24
• /
• 2006

The stresses in concrete pavement systems are larger when vehicle loads are applied at pavement edges, and these large stresses significantly affect the behavior and performance of pavements. Therefore, in this study, the stress distribution and the critical stresses in concrete pavements were investigated using a finite element model when dual-wheel single-, tandem-, and tridem-axle loads were applied at pavement edges. First, the stress distribution along the longitudinal and transverse directions was analyzed, and then the effects of slab thickness, concrete elastic modulus, and foundation stiffness on the stress distribution were investigated. The effect of the tire contact pressure related to the tire print area was also studied. The location of the critical stress occurrence in concrete pavements was finally investigated. From this study, it was found that the critical concrete stress due to edge loads became larger as the concrete elastic modulus increased, the slab thickness increased, and the foundation stiffness decreased. The effect of the tire contact pressure on the critical stress was clear as the slab thickness became smaller. The critical stress location in the transverse direction was independent of the concrete elastic modulus and the foundation stiffness; however, it moved into the interior as the slab thickness increased. The critical stress location in the longitudinal direction was under the axle for single- and tandem-axle loads, but for tridem-axle loads, it tended to move under the middle axle from the outer axles as the concrete elastic modulus and/or slab thickness increased and the foundation stiffness decreased.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.305-311
• /
• 2016

Even though automakers have actively been conducting studies on autonomous navigation thanks to the development and application of wireless Internet technology, the traffic accident has been kept unsolved. The causes of the accident are drowsy driving, a mistake of a driver, environmental factors, and a wrong road structure; Driving manner and characteristics of a driver among the causes are significantly influential for the accident. In this paper, a study to measure characteristics of zigzag driving that can be seen before an occurrence of an accident regarding traffic accidents that can be incurred while driving manually or autonomously was conducted. While existing studies measured zigzag driving based on characteristics of the change of lateral angular velocity by imaging techniques or driving manner on the first and second lane, this study proceeded to measure zigzag driving by setting a lateral moving distance and a critical value range by utilizing the value of a sensor.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1B
• /
• pp.73-81
• /
• 2009

This paper presents a numerical investigation of the impact of the secondary currents on solute transport in open-channel flows. The RANS model with Reynolds stress model is used for flow modeling, and the GGDH(generalized gradient diffusion hypothesis) model is used to close the scalar transport equation. Using the developed model, the impact of secondary currents on solute transport in open channel flows over smooth-rough strip is investigated. Through numerical experiments, the secondary currents are found to affect the solute spreading, leading a movement of the position of the peak concentration and a skewed distribution of solute concentration. Due to the lateral flow of secondary currents near the free surface, the concentration at the rough strip is found to be larger than that at the smooth strip bed. The solute at the rough strip is more rapidly transported than smooth bed. A magnitude analysis of the solute transport rate in scalar transport equation is also carried out to investigate the effect of secondary currents and scalar flux on the concentration distribution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.193-202
• /
• 2001

현재 국내에서는 아파트 건물을 짓는데 벽과 바닥판으로만 이루어진 벽식 구조형식을 많이 사용하고 있다. 이러한 고층 아파트건물을 해석하기 위해서 ETABS나 MIDAS/BDS 같은 상용프로그램이 주로 사용되고 있다. ETABS는 해석상의 편의를 위하여 바다판을 강막으로 가정하여 모형화 하고 바닥판의 휨강성은 고려하지 않고 있다. 이러한 가정은 프레임 구조물을 해석할 때에는 합리적이라고 할 수 있다. 그러나 벽식 구조물은 바닥판의 휨강성이 전체 구조물의 횡방향 강성에 큰 영향을 미치므로 바닥판의 휨강성을 고려하지 않으면 전체 구조물의 강성을 과소평가하게 된다. 따라서 바닥판을 판요소로 세분하여 모형화 하는 것이 필요하다. 그러나 이때 많은 양의 해석 시간과 컴퓨터 메모리가 필요하게 된다. 따라서 본 연구에서는 부분구조법과 행렬응축기법을 사용하여 해석 시간과 컴퓨터 메모리의 사용을 줄이면서도 바닥판의 휨강성을 효율적으로 해석할 수 있는 해석 기법을 제안하였고 예제를 통하여 검증하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.17-19
• /
• 2014

해양사고 발생 직후 2차적인 피해로의 확산을 방지하기 위한 조치로 사고선박을 안전한 장소로 이동하게 된다. 사고선박의 크기와 상태 그리고 해상조건을 고려하여 예선의 크기와 척수가 결정된다. 이 과정에서 사고선박의 선체저항을 계산하게 되는데, 기존의 이론식을 적용하여 계산하고 이에 대한 검증 단계로 예인실험을 실시하였다. 대상선박은 목포해양대학교 실습선 새유달호이며, 장력계, 외력 측정장치 등 실험장치는 실습선에 탑재하여 계측하였다. 실험장소는 목포해양대학교 인근 묘박지이며, 당시 풍속은 7m/s, 조류는 0.7m/s 전후이었으며, 횡방향 예인, 전방 2척 예인, 전 후방예인, 프로펠러고착, 예인속력의 변화 등 다양한 시나리오에 대하여 실험을 실시하였다. 장력의 계측은 예선의 예인삭을 사용하였으며, 실습선 선수미 비트에 장력계를 연결하여 측정하였고, 장력계의 최대측정 범위는 20톤을 사용하였다. 예인속력은 정지에서 3m/s까지 단계적으로 증가시키면서 해당 속력별 장력을 계측하여 속력증가에 따른 예인력을 확인하였다. 최종적으로 이론계산 결과와 실선실험 결과를 상호 비교하여 이론계산식의 유효성을 검증하였다.