• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.4 s.23
• /
• pp.57-65
• /
• 2006

In this study, hydraulic model same as natural channel with junction area and curved reach is constructed, and after that the variation of difference of the water surface elevation at cross section in junction area is analyzed using constructed hydraulic model. In junction area, the variation of maximum water level based on downstream section is more affected in discharge ratio at upstream than downstream. The maximum water level increased as closed to junction and the peak level appeared at just downstream of junction. The slope of water elevation at cross section is affected in section shape and decreased as discharge ratio is reduce. The expressed formulas developed in the channel consist of constant curvature and section shape showed difference of 60% with measured value, but the suggested formula in this study to compute difference of water surface elevation showed difference of 10% with measured value.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.103-111
• /
• 2003

This study proposes methodology deterimining a basic pedestrian crossing capacity that plays a critical role in the installation of pedestrian signal at the crosswalks. The methodology is based on the pattern of vehicle arrived at the crosswalks. Erlang distribuion is used as headway distribution that can cover the various levels of flow rate. Models using Erlang distribution are represented by Erlang parameter (K) of 1, 2, or 3 at 2-, 4-, or 6-lane roadway in both directions. In addition, this study considered the only type of road with a pedestrian refuge area in the median that is used to wait for the allowable gap provided by the flow of another direction. As a result, the pedestrian capacity decreases as flow rate increases and Erlang parameter increases for the road with the pedestrian refuge. This study develops the models to determine the pedestrian capacity under a variety of flow rates and the outcomes of this study could be used as the criteria for the determination of the installation of pedestrian signal or for the provision of pedestrian refuge in the median of road.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.401-405
• /
• 2016

중소하천에 기능을 상실한 하천 횡단 수리구조물이 많이 설치되어 있으며, 수리구조물 상류와 하류에 흐름 및 유사의 이송에 대한 연속성을 차단하고, 하천 교란의 원인이 되고 있다. 또한 사회적으로 수리구조물의 기능을 개선하거나 철거하여 하천복원의 필요성이 제기되고 있다. 따라서 본 연구에서는 실내실험을 통해 하천횡단 수리구조물에 의하여 형성된 상류의 지형이 하류에 미치는 영향을 분석하였다. 흐름이 하천횡단 수리구조물을 월류하면서 직하류에 세굴이 발생하고, 상류에서 델타를 형성하면서 퇴적되었다. 상류에서는 사주가 형성되었으며, 하류의 지형변화에 영향을 주었다. 하천횡단 수리구조물의 상류에 형성된 델타는 하류로 일정하게 이동하고 있으며, 델타가 구조물에 도달하기 바로 직전에서 수리구조물하류의 세굴이 가장 깊게 나타났다. 수리구조물 철거 후, 상류에 퇴적된 토사는 흐름에 의하여 급격하게 하류로 유실되었다. 천급점은 상류로 이동하며, 두부침식을 일으켰다. 일정한 시간이 지난 후에 상류에서 유입되는 유사에 의하여 침식은 감소되었다. 시간이 지나면서 하류에서 교호사주의 형상을 유지하며, 평형상태를 유지하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.377-382
• /
• 2005

하도내에 설치된 3개의 구조물이 모두 제거된 상태에서 원형하천의 합류부 하류의 유량이 $Q_{100}=12,090m^3/sec$인 경우에 대해 본류와 지류의 유량비($Q_s/Q_m$)가 0.99, 0.85, 0.72, 0.67, 0.57로 변화하는 경우의 유량을 실험유량으로 사용하여 수리모형실험을 수행하였다. 하도의 구조물이 제거된 경우 합류부로 근접할수록 서서히 증가한 수위는 합류부를 지나면서 급격히 감소한다. 이때 본류와 지류의 유량비($Q_s/Q_m$)가 감소할수록 합류부에서 증가된 수위는 하류쪽으로 이동하며 합류부 이후에서의 감소폭이 작아지며 각 단면에서의 수위변화율은 합류부 상류 구간에서는 감소하고 합류부 하류 구간에서는 증가하고 있다. 또한 합류부에 가까울수록 횡단면에서의 수위차는 증가하여 합류부 중심 직하류 단면에서 최대를 보이는데 유량비가 감소할수록 합류부 횡단면에서의 수위차는 하류구간에서는 감소하며 합류부 상류구간에서는 증가한다. 합류구간의 유속변화에 있어서는 합류부에 가까울수록 평균유속이 감소하다가 합류부에서 증가하기 시작하여 합류부 중심 직하류 단면에서 평균유속이 최대를 나타내며 최대유속의 변화율은 합류부 하류구간보다 합류부 상류구간에서 더 크게 나타난다. 합류지역의 주흐름구간은 합류점 이후 구간에서 합류점 부근의 평균 유속보다 큰 유속을 보이는 구간으로 유량비가 감소하면 주흐름구간의 폭이 증가하며 하도의 하류쪽으로 이동하기는 하나 유량비에 의한 영향은 크지 않다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.382-389
• /
• 2000

The instantaneous and ensemble averaged flow characteristics of a round jet issuing normally into a crossflow was studied using a flow visualization technique and Particle Image Velocimetry measurements. Experiments were performed at a jet-to-crossflow velocity ratio, 3.3, and two Reynolds numbers, 1050 and 2100, based on crossflow velocity and jet diameter. Instantaneous laser tomographic images of the vertical center plane of the crossflow jet showed that there exist very different natures in the flow structures of the near field jet even though the velocity ratio is the same. It was found that the shear layer becomes much thicker when the Reynolds number is 2100 due to the strong entrainment of the inviscid fluid by turbulent interaction between the jet and crossflow. The mean and second order statistics were calculated by ensemble averaging over 1000 realizations of instantaneous velocity fields. The detail characteristics of mean flow field, stream wise and vertical r.m.s. velocity fluctuations, and Reynolds shear stress distributions were presented. The new PlV results were compared with those from previous experimental and LES studies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.308-308
• /
• 2017

국내 하천에 설치된 횡단구조물은 2009년을 기준으로 약 20,753개로 알려져 있으며 수위 유지, 하상고 유지 등의 목적을 가지고 설치된다. 그러나 낙차를 가진 빠른 유속의 흐름을 형성시켜, 하류 하상에서 국소 세굴을 발생시킨다. 이를 방지하기 위해 횡단구조물 하류에 굴요성 구조(flexible structure)인 돌망태, 블록공, 사석 등으로 이루어진 바닥보호공(bed protection)이 설치되나 유실, 침하 등의 문제가 빈번히 발생되고 있어, 문제를 해결하기 위한 연구가 필요하다. 본 연구는 이러한 피복 대책에서 일어날 수 있는 파괴 기구인 전단파괴, 흡출 파괴, 경계 파괴, 하상 형태 변화에 따른 하부 침식 중 흡출 파괴(winnowing failure)를 유발하는 흐름을 검토하기 위한 수치모의를 수행하였다. 이때 흡출 파괴는 바닥보호공의 공극으로 미세한 하상 재료가 난류와 침투류의 작용에 의해 침식되어 바닥보호공이 침하되는 것을 말한다. 수치모의는 전산유체동역학(Computational Fluid Dynamics, CFD) 모형인 FLOW-3D 모형을 이용하였으며, 난류 모형으로 LES 모형을 적용하고 조밀한 격자를 부여하여 바닥보호공의 공극에서 발생되는 비교적 작은 척도의 와(vortex)를 해상할 수 있도록 하였다. 수치모의에 적용된 횡단구조물은 보, 물받이공, 바닥보호공으로 구성하였으며 특히, 바닥보호공의 형상은 구체(sphere)로 가정하여 다층으로 배치하였다. 바닥보호공의 공극 또는 구체 사이에서 발생되는 유속, 압력 등의 흐름특성을 분석한 결과, 바닥보호공 두께가 두꺼울수록 흡출 파괴에 대해 안정적인 것으로 나타났다. 이는 바닥보호공 설계를 위한 기초자료로 활용될 수 있으며, 향후 입자영상유속계(Particle Image Velocimeter, PIV)와 같이 공극에서 흐름을 측정할 수 있는 방법과 병행한 연구를 수행할 수 있을 것이다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.77-89
• /
• 2008

The bikes are conflicted with the cars and the pedestrian at the intersection and the road with the bike crossing. To establish the bike signal at this section is one method to solve this conflict. According to the survey for the bike road status and the biker's characters which are crossing the road at the intersection, the bike crossing are established with beside the pedestrian crossing and most of the bikers are crossing the street by the pedestrian signal. Also, the bike queue which is waiting the signal change at the stop line was cleared before the closing the pedestrian signal. Considering the result of this survey, TOUCAN crossing signal type in England for bike signal at the place where the bike crossing are established with beside the pedestrian crossing, in which bike rider and pedestrian can cross by the pedestrian signal operation, is suggested. However, at the place where the bike crossing is apart from the pedestrian crossing, the bike signal which is connected to the vehicle signal is suggested. All these types of bike signals can be accepted for the present bike crossing equipments and the biker's characters and be adapted to the police standard traffic signal controller by adjusting the signal time only without any function change.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.11
• /
• pp.1434-1443
• /
• 1999

The turbulent fluctuations of temperature and two components of velocity have been measured with hot- and cold-wires in the Thermally Stratified Wind Tunnel(TSWT). Using the fin-tube heat exchanger type heaters and the neural network control algorithm, both stable ($dT/dz=109.4^{\circ}C$) and unstable ($dT/dz=-49.1^{\circ}C$) stratifications were realized. An ambient air jet was issued normally into the cross flow($U_{\infty}=1.0 m/s$) from a round nozzle(d = 6 mm) flushed at the bottom waII of the wind tunnel with the velocity ratio of $5.8(U_{jet}/U_{\infty})$. The characteristics of turbulent dispersion in the cross flow jet are found to change drastically depending on the thermal stratification. Especially, in the unstable condition, the vertical velocity fluctuation increases very rapidly at downstream of jet. The fluctuation velocity spectra and velocity-temperature cospectra along the jet centerline were obtained and compared. In the case of stable stratification, the heat flux cospectra changes Its sign from a certain point at the far field because of the restratification phenomenon. It is inferred that the main reason in the difference between the vertical heat fluxes is caused by the different length scales of the large eddy motions. The turbulent kinetic energy and scalar dissipation rates were estimated using partially non-isotropic and isotropic turbulent approximation. In the unstable case, the turbulent energy dissipation decreases more rapidly with the downstream distance than in the stable case.

• Journal of the Korean earth science society
• /
• v.34 no.2
• /
• pp.136-147
• /
• 2013

This study examined the effect of the Antarctic Oscillation (AAO) in June on the June rainfall in Korea by using a correlational statistical analysis. Results showed that there is a highly positive correlation between the two variables. In other words, the June rainfall in Korea is influenced by the Mascarene High and Australian High that are strengthened in the Southern Hemisphere, which is a typical positive AAO pattern. When these two anomalous pressure systems strengthen, the cold cross-equatorial flows in the direction from the region around Australia to the equator are intensified, which in turn, force a western North Pacific subtropical high (WNPSH) to develop northward. This pressure development eventually drives the rain belt to head north. As a result, the Changma begins early in the positive AAO phase and the June rainfall increases in Korea. In addition, a WNPSH that develops more northward increases the landfall (or affecting) frequency of tropical cyclones in Korea, which plays an important role in increasing the June rainfall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.465-470
• /
• 1998

A cross-flow fan often generates discrete noise call blade passing frequency tones. Several methods have been investigated to reduce this BPF noise, where the random distribution of blades is the most promising one. A simple and effective algorithm to determine a random distribution of blades is proposed which considers fan. performance as well as noise characteristics. The proposed method is verified by a simple numerical model and is applied in manufacturing cross-flow fan samples. Also some experiments are carried out and the experimental results are analyzed.