• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.60-63
• /
• 1998

본 연구에서는 유류 오염토양 복원을 위한 효율적인 세척공정을 구성하여 현장적용 가능성을 검토하였다. 토양세척공정은 co-current식 전세척장치와 counter -current식 세척조로 구성된다. 물이 주입되는 co-current식 전세척장치에서는 스크류 축의 회전력에 의한 토양 이송 및 스크류의 각 pitch 사이에 부착된 임펠러의 기계적 교반력에 의한 세척이 동시에 이루어진다. 전세척장치를 통과한 토양과 물은 세척조로 유입되어 세척용액과 반대방향으로 이동하게 된다. 세척조의 내벽에 부착된 나선형 웨어에 의해 적정 운전조건하에서 일정 크기를 기준으로 토양이 분리되며, 각 웨어 사이에 부착된 임펠러의 교반력에 의해 오염토양이 세척된다. 실험결과, 운전시 고려해야 할 주요 영향인자들은 전세척장치에서의 토양주입량은 1 kg/min, 진탕비는 1, 회전속도는 50 rpm에서 최대 세척효율(#4-, 83.6%)을 보였으며, 세척조에서는 토양.물 주입위치 15 cm, 회전속도 5 rpm, 경사각 6$^{\circ}$, 세척용액 주입유량이 0.8 L/min일 때 최대 세척효율인 97.9%(#4-)를 나타냈다.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.236-241
• /
• 1998

Recurrent dislocation of elbow joint occurs relatively rarely by the injury of the collateral ligament which contributes elbow joint stability. Among them, posterolateral rotatory instability occurs by the injury to the lateral ulnar collateral ligament. We experienced a case of recurrent dislocation of elbow joint due to posterolateral rotatory instability. We treated operatively with lateral ulnar collateral ligament reconstruction using the palmaris longus tendon by technique of Nestor et al. We report it with literature analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.148-158
• /
• 2001

In this paper, Automatic Dynamic Balancer(ADB) was simulated and investigated to use at the high speed rotating chuck for the friction welding. In the limited computer simulations and experiments that have been presently carried out, several conclusions have been found. Above critical speed of the rotating system, ADB can balance the rotating disk. Therefore, it can be predicted that ADB can make an uniform flash during the friction welding.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.76-80
• /
• 2007

반도체 제조공정에서 매엽식 습식 식각 공정은 기판을 회전하면서 상하 면에 약액을 분사하는 형태로 박막을 식각한다. 이 때 기판은 척을 이용하여 고정되는 데 기판과 척이 접촉하는 가장자리 부분에서 약액의 흐름이 정체되거나 일정하지 못해 잔류막질이 남게 되고, 후속 공정에서 기판 오염의 문제를 야기하게 된다. 본 논문에서는 이러한 문제를 해결하기 위해 기판을 파지하는 여러 개의 척을 2개조로 나누어 교대로 파지하도록 하는 기능을 제시하였다. 2개 조의 척들은 자성체를 사용하여 고속 회전 중에 비접촉 방식으로 구동하였고 실제 약액 처리론 수행하여 효과를 관찰하였다. 결과적으로 기존 고정형 파지 방식에 비해 교차형이 기판 베벨면이나 에지면에서의 잔류 막질 제거에 탁월한 효과가 있음을 확인하였다.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.109-116
• /
• 1998

Treatability tests of a soil washing device were performed for the remediation of eil-contaminated soil. The contaminant-containing soil with water was first fed into a oc-current screw conveyor and then into a counter-current washer. Surfactant was introduced into the washer and feeding soil was continuously separated on the basis of #40 mesh at the same time. A washing efficiency of 97.9% was achieved by the the soil washing device optimized.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.67-71
• /
• 1991

최근 기계가공의 고능률화와 고정도화를 위하여 공작기계의 고속화의 요구가 해가 갈수록 높아지고 있다. 특히 터어닝센타(Turning Center)에 있어서도 주축회전수가 1만 rpm 정도의 고속화, 고출력화와 함께 공구의 고속, 중점삭을 향한 성능향상이 진전되어가고 있으나, 기계-공작물-공구의 절삭 시스템 중에서 기계와 공작물을 연결하는 인터페이스로서, 고속화된 척의 개발이 늦어져서 기계의 고속화를 저해하는 하나의 요인으로 지적되어 지고 있다.(중략)

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.202-207
• /
• 1975

During the term of June, 7 to August 11, the noises in the maine engine room in terms of the r. p. m. of the Pung-Yang Ho (4,500 H. P.), the Chuk-Yang Ho (3,800 H. P.), the Dong-Bang Ho (3,000 H. P.), the Oh-Dae San Ho (2,690 H, P.), the Kwan-Ak-San Ho (1,000 H. P.) and the Back-Kyung Ho (850 H. P.) (Refer to Table 1) were measured with the use of sound level meter, which has measuring range 37-140 dB and the results obtained are as follows : 1. Capacity of the engine room becomes large according to the total H. P. of the main engine, but the vessels are using of a type of engine, i.e., 6 cylinder, and thus the noise, pressure has shown a tendency to become lower except Kwan-Ak-San Ho, Chuk-Yang Ho and Dong Bang Ho where the noise pressure was higher by 3 dB than curve of mean value. 2. The maximum noise pressure appeared even before the main engine reached the maximum r. p. m. and while the percentage of the r. p. m. varied depending on the vessel, the maximum noise appeared at around the $67-75\%$ of the r. p. m. 3. The maximum of noise pressure in the respective engine room ranged between 93.5-105 dB while it was between 72-81 dB at the fish process room in the stern trawl vessel where the oral communications were possible.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.1
• /
• pp.21-25
• /
• 2010

Purpose: To evaluate efficacy of ultrasound guided prolotherapy in patients with persistant symptoms after rotator cuff repair. Materials and Methods: Between January and December of 2008, 90 patients who had persistant pain and shoulder adhesion 4 weeks after rotator cuff repair were treated with ultrasound guided prolotherapy. The mean age was 55.2 years. Visual analogue scale (VAS) and range of motion (ROM) before and after the procedure, complications related to the procedure were analyzed. Results: The average VAS score at 4 weeks follow up decreased to $2.5{\pm}2.304$ from $6.3{\pm}1.25$ before prolotherapy and forward flexion range at 4 weeks follow up increased to $143{\pm}26.63$ from $106{\pm}21.64.$ Four weeks after the ultrasound guided prolotherapy, 74 cases(82%) reported of improved pain and ROM, 13 cases(14%) reported of improvement after 2~5 days of the procedure and 3 cases(4%) had no improved in pain and ROM. No complications were encountered. Conclusion: The authors believe that ultrasound guided prolotherapy in repaired rotator cuff tear patients theoretically increased possibilities of healing and with relieving the pain of the patients results in increased possibility of rehabilitation effect.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.5-12
• /
• 1994

고속절삭을 통해서 가공능률과 가공정밀도의 향상을 도모할 수 있기 때문에, 최근에는 공작기계용 고속주축계가 많은 주목을 받고 있다. 본 연구에서는 주축 선단부에 무거운 척과 공작물이 위치하는 선반용 고속주축계의 동특성을 해석하기 위해서 유한요소법을 도입하였다. 특히 세장비가 비교적 작은 주축은 Timoshenko 이론으로, 폭이 유한한 베어링은 반경방향 외에도 모멘트방향의 강성 및 감쇠특성을 가지고 있는 것으로 모델화하였다. 그리고 선반용 고속주축계의 고유진동수와 감쇠비에 대한 주축회전수, 베어링의 지지특성, 베어링의 간격, 주축재료의 내부감쇠율 등의 영향을 고찰하였다.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.257-274
• /
• 2015

The purpose of the current study was to validate Fetzer Institute & National Institute on Aging Working Group[NIA](1999)'s Brief-Multidimensional Measure of Religiousness/Spirituality Scale (BMMRS) in Korean adults. The Korean version of BMMRS, Spiritual Well-Being Scale(SWS), Korean Sprituality Scale(KSS), Penn State Worry Questionnaire(PSWQ), and Intolerance of uncertainty Scale(IUS) were administered to the 286 students and community samples. A principle axis factoring analysis with direct oblimin rotation and Kaiser normalization identified a six-factor solution accounting for 66.24% of the variance in scores, labeled as: positive spiritual experience, negative spiritual experience, forgiveness, religious practices, negative congregational support, and positive congregational support. Confirmatory factor analysis results showed that 6 factor model of BMMRS have a good fitness. Also, the internal consistency(.64~.97) and the test-retest reliablity was adequate.(.72~.88) Korean version of BMMRS has adequate psychometric characteristics so it can be used to verify the effects of various compassion-related psychotherapeutic approaches.