• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.991-996
• /
• 2017

Gait stability is partly characterized by an extended stance phase that comprises 60 of the gait ％ cycle. In this study, a gait pattern was employed for a crank drive system that allows for stable lower limb kinematics during stand-up cycling. A quick return mechanism was applied to the crank system to allow for a slow rotation of the crank during the stance phase and for a quick return during the swing phase. Design parameters for the quick return crank mechanism were defined, and kinematic simulations were performed to understand the behavior of the mechanism. To evaluate the design, an experimental instrument was fabricated, and the cycling motion was analyzed. The results indicated that this new drive system can stabilize the center of mass of the user. This study can contribute to the development of a stand-up bicycle that allows for more comfortable leg kinematics.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.35-40
• /
• 1993

A FET(field effect transistor) type lipid sensor was fabricated uy immobilizing lipase enzyme on the gate of pH-ISFET($SiO_{2}/Si_{3}N_{4}$). A water soluble polymer, polyvinyl alcohol(PVA) was modified with 1-methyl-4-(formyl-styryl) pyridinium methosulfate(SbQ) to give a photosensitive membrane(PVA-SbQ) in which lipase was immobilized. The optimum photolithographic conditions were ; spin coating speed $5,000{\sim}6,000$ rpm. UV exposure time $20{\sim}30$ seconds, developing time in water $30{\sim}40$ seconds, and vacuum drying time 45 min. at room temperature with the suspension containing PVA-SbQ aqueous solution(SbQ 1mol%, 10 wt %) $200{\mu}L$, bovine serum albumin (BSA) 7.5 mg, and lipase 10 mg. The lipid sensor showed good linear calibration curve in the range of $10{\sim}100$ mM triacetin as a lipid sample.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.271-275
• /
• 2013

Shoulder bone scan everyday life, sports activities at the side of the shoulder joint, or applying strong force in the lateral occurs. Mainly on upper arm abduction, temple, other rotational dislocation of the shoulder joint gahaejyeo as useful for observing the presence or absence of lesions is used. Shoulder PA oblique projection prevent distortion of the image due to the angle and the most useful diagnostic radiological investigate shooting angle. Shoulder blade body and the acromion and coracoid process Y-view is formed characters. $10^{\circ}$ angle between the shoulder blades and the acromion is the obstruction. $20^{\circ}{\sim}25^{\circ}$ to the Y-view of the humerus head looks superimposed, the position of the shoulder joint and seemed appropriate. $35^{\circ}$ of the humerus head superimposed on the Y-view, but above the humerus head and shoulder joints were distorted. When $45^{\circ}$ elevation observed on the side of the best has come Y-view also acromion and coracoid process is finished.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.481-489
• /
• 2000

A time-frequency analysis method was developed to analyze the dispersive waves caused by impact loads in structural members such as beams and plates. Stress waves generated by ball drop and pencil lead break were recorded by ultrasonic transducers and acoustic emission (AE) sensors. Wavelet transform (WT) using Gabor function was employed to analyze the dispersive waves in the time-frequency domain, and then to find the arrival time of the waves as a function of frequency. The measured group velocities in the beam and the plate were compared with the predictions based on the Timoshenko beam theory and Rayleigh-Lamb frequency equations, respectively. The agreements were found to be very good.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.49-57
• /
• 2020

Conventional electric motors are not suitable for aircraft because of their large size and weight. High-temperature superconducting (HTS) motors have high current density, high magnetic field density, and low loss, so they can significantly reduce the size and weight compared to general electric motors. This paper presents the conceptual design and analysis results of HTS motors for electric propulsion in future aircraft. A 2.5 MW HTS motor with a rotational speed of 7,200 RPM was designed and the specific power (kW/kg) was analyzed. The operating temperature of the field coil of the HTS motor is 20K in consideration of LH2 cooling. The stator winding were connected in a multi-phase configuration and Litz wires were used to minimize eddy current losses. As a result, it was confirmed that the specific power of the motor is about 18.67 kW/kg, which is much higher than that of the conventional electric motor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4115-4120
• /
• 2010

In manual inspection of Lead Screw of computers many workers are needed to inspect samples, and its main disadvantage is that such types of inspection system not only gives low production, but also gives low perfection. Besides, in manual inspection system, the inspection cost of samples is higher than that of the automatic inspection system. Therefore, in this study to compensate these shortcomings, an automatic inspection system is developed. For the inspection of the surfaces and different dimensional parameters of computer Lead screw, a $360^{\circ}$ rotating machine vision system is developed. From the detailed analysis of the inspection results using the present developed inspection system, it is observed that the developed Lead Screw automatic inspection system is superior to those of manually inspection system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.691-697
• /
• 2006

Induction motors are critical components in industrial process. So there are many research in the condition based maintenance, online monitoring system, and fault detection. This paper presents a scheme on the detection and diagnosis of the three-phase squirrel induction motor under unbalanced voltage, broken rotor bar, and a combination of these two faults. Actually one fault happen in operation, it influence other component in motor or cause another faults. Accordingly it is useful to diagnose and detect a combination fault in induction motor as well as each fault. The proposed fault detection and diagnosis algorithm is based on the stator currents from the squirrel induction motor and simulated with the aid of Matlab Simulink.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.276-276
• /
• 2019

하천에서 신뢰성 있는 유속 및 유량의 측정 자료는 수자원의 효율적인 계획과 관리를 위한 가장 기본적인 사항이다. 유속 및 유량을 측정하기 위해 지금까지는 주로 프로펠러 유속계나 초음파유속계 또는 봉부자 등을 활용해왔으며, 홍수 시에는 봉부자에 의존하고 있다. 봉부자를 이용한 유속 측정은 측정 환경이나 측정자에 따라 정확도 차이가 난다는 한계점이 있다. 뿐만 아니라 실제로 홍수가 발생했을 때는 유량이 매우 크기 때문에 교량으로 접근이 어렵고 현장으로의 접근자체가 제한될 수 있다. 위와 같은 문제들을 해결하기 위한 대안으로 비접촉식 유속 측정방법인 표면영상유속계(LSPIV, Large Scale Particla Image Velocimetry)가 있다. 표면영상유속계는 수면을 촬영한 영상을 분석하여 표면 유속을 측정하는 기법으로, 영상 촬영 장비와 분석 소프트웨어만 있으면 유속을 측정할 수 있다. 유속 및 유량 측정 결과를 보고할 때는 그 결과를 사용하는 사람이 얼마나 믿고 사용해도 좋은가에 관한 신뢰성을 판단할 수 있도록 신뢰도를 나타내는 어떤 정량적인 값인 불확도를 유량 측정 결과와 함께 제시하여야 한다. 표면영상유속계는 매우 간편하고 신속하게 하천의 유속장을 측정하는 기법이지만 측정 불확도 산정에 대한 연구가 미흡하여 정확한 측정 불확도를 제시할 수 없는 실정이다. 표면영상유속계의 불확도 인자는 바람의 영향, 입자 밀도/크기, 촬영시간 간격, 상관영역의 크기, 전단흐름/회전흐름, 참조점 측량/식별, 이동거리 산정 등이 있다. 표면영상유속계의 측정불확도를 제시하기 위해서는 각 불확도 인자에 대한 불확도를 제시하여야 한다. 따라서 본 연구에서는 Matlab을 이용하여 표면영상유속계의 불확도 요인 중 영상에서 참조점식별 시 발생하는 불확도를 분석하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.1-7
• /
• 1994

As a subsequent work presented in Ref.[1] which deals with the global dynamic wave loads in the classification rules, further studies on such as the dynamic pressures above load waterline, motions and accelerations and other local design loads were carried out. Frequency domain 2D linear strip theory is employed and statistical analyses for the concerned ship responses were carried out for the 17 existing ships to derive simple and descriptive formula which can be used as a guidelines at preliminary design stage as well as a part of classification rules. The calculated results and thereby proposed formula are compared with those of other available data, and will be incorporated in the rules for steel ships of Korean Register of Shipping.

• Korean Journal of Optics and Photonics
• /
• v.30 no.2
• /
• pp.59-66
• /
• 2019

We report highly sensitive detection of myocardial infarction biomarkers, such as myoglobin and cTnI, within several hundred seconds using a rotating-analyzer ellipsometer and a biosensor with biochips fabricated on a $SiO_2$-coated tilted silicon substrate. We choose the running buffer to be pure phosphate-buffered saline (PBS) or 10% mixed human serum. When we choose the running buffer to be pure PBS, we obtain diagnostic densities of pure myocardial infarction biomarkers of up to 1 ng/ml and 5 pg/ml respectively. Meanwhile, when we use PBS with 10% human serum, the measured densities of myoglobin and cTnI were up to 1 ng/mL and 1 pg/mL respectively. The measured diagnostic densities are less than 1/15 and 1/80 (in cases of myoglobin and cTnI respectively) of those referenced by the World Health Organization.