• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.76-76
• /
• 2017

Ni-Ti 파일은 근관치료 시 근관형성에 사용되며 근관계 내 조직 잔사와 세균 을 포함한 모든 내용물을 제거하고 미세누출이 생기지 않도록 성공적으로 근관충전을 할 수 있는 근관의 형태를 만드는데 사용된다. Ni-Ti 파일은 수동형 파일처럼 날이 풀어지거나 예각으로 꺾이는 등 시각적으로 나타나는 파일의 피로도나 손상정도를 인지하기 어려워 파일이 근관 내에서 부러지는 것을 막기가 어렵다. Ni-Ti 파일은 육안으로 관찰 할 수 있는 구부러짐이나 풀림 등의 소성변형 없이 기구의 탄성한계 내에서 갑작스럽게 파절되는 경우가 있는데, 이는 만곡 근관 내에서 기구가 회전하는 동안 만곡의 안쪽에는 압축응력이, 만곡의 바깥쪽에는 인장응력이 반복적으로 가해짐으로써 파절의 표면에 미세 파절과 균열이 발생하고 전파되어 결국 피로파절(fatigue fracture)을 야기하게 된다. 또한 Ni-Ti파일이 반복응력을 받으면 균열이 형성되면서 파절이 야기되며 연성파절(ductile fracture) 양상을 나타낸다고 보고하였다. Ni-Ti 파일을 이용한 피로파절에 대한 이전의 연구에서는 파일의 직경이나 경사도 (taper), 단면 형태 및 회전속도, 표면결함 등이 파절에 영향을 미친다고 보고되고 있다. 사용하지 않은 Ni-Ti파일을 구부려 응력을 가 한 상태에서 주사전자현미경으로 관찰한 결과 기계 가공 과정에서 발생한 균열, 미세 결함, 긁힌 자국 및 불균질성 등이 원인으로 알려져 있다. 따라서 본 연구발표에서는 표면결함을 최소화하고 기구의 회전응력 하에서 피로파절저항성을 향상시키기 위한 방법에 대하여 알아보고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.347-352
• /
• 2019

This study focused on improving the cast quality of small-sized induction motor rotors during the die casting process. A new rotor core cast model was proposed based on previous research results and parametric studies. Numerical analyses using 3-dimensional half models were performed to evaluate the filling patterns of aluminum molten metals into a mold and on-site experiment performed to verify the newly proposed cast model. The following were obtained from numerical filling analyses and experimental results. First, molten metals started to fill the lower end ring, then moved on to fill the core slot and upper end ring and finally stopped to fill at the rotor core slot. Second, significant circulation of molten metals was not observed on the lower end ring, resulting in fewer defects at the section of the lower end ring from the experimental results. Third, the new shape of a rotor core cast was effective in producing rotors with sound cast quality, and reducing the end ring cast defect area by approximately 70 %.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.33-45
• /
• 2004

The purpose of this experimental study was to determine appropriate magnitude of the Gable bends to produce maximum retraction of the anterior teeth. The Calorific Machine was used to illustrate the tooth movement in three dimension. The experimental teeth except the first premolar were embedded in the artificial alveolar bone part. In a series of experiments, the extraction space was closed using arch wires with bull loops into which the gable bends of $10^{\circ},\;20^{\circ},\;30^{\circ}$ degrees were incorporated. The experiments were repeated three times for each degree of the gable bend. Before and after the space closure, radiographs were taken in the sagittal and occlusal directions using occlusal films. Analysis of variance and Scheffe post hoc test were used to determine significant differences among the three groups. The following results were obtained. 1. As magnitudes of the gable bends increased, more bodily anterior tooth movement was seen and the distance of retraction also increased. 2. As magnitudes of the gable bends increase, the amount of posterior tooth protraction decreased while intrusive and buccal movement increased. 3. The arch was coordinated by distal-in rotation of the canine and mesial-in rotation of the second premolar adjacent to the extraction space.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.136-141
• /
• 2002

Purpose : The role of biceps pulley is stabilizing sling for the long head of the biceps tendon against anterior shearing stress in the rotator interval. The purpose of this study was to classify arthroscopic findings of biceps pulley and to evaluate the relationship with shoulder pathology. Materials and Methods : From January 2002 through July 2002, we observed biceps pulley in 49 cases of shoulder pathology treated with arthroscopically. There were 22 cases of anterior instability, 12 cases of rotator cuff tear, 5 of impingement syndrome, 6 of frozen shoulder, 2 of superior labral injury and 1 of each scapulothoracic bursitis and biceps dislocation. We classified biceps pulley as four types according to the arthroscopic appearance. Type I its stretched type. type II as sling type, type III at detached sling type, and type IV as concealed type. Results : We observed stretched type in 24 cases $(49\%)$, sling type in 5 cases $(10\%)$, detached sling type in 2 cases, concealed type in 1 case, and unidentified cases in 17 cases $(35\%)$. Conclusion : Development and variation of biceps pulley may have symptomatic correlation according to the degree of shoulder motion or pathologic status.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.37-44
• /
• 1997

In this paper the bending collapse characteristics of square and rectangular steel tubes were studied with the pure bending test machine which apply pure bending moment without imposing shear and tensile forces. Under pure bending moment, delayed buckling modes occur and depend on test length and shape of section. For delayed mode, the endrgy of bending moment is absorbed by strain hardening energy. The pre- dictions of maximum moment and moment-rotation angle curve from those concepts are in good agreement with experimental observations.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.73-84
• /
• 2003

This study was performed to find out how much projection errors in the cephalometric measurements were made by vertical head rotation in taking posteroanterior cephalograms. 25 adults without any apparent facial asymmetry or severe sagittal skeletal discrepancy were selected and the posteroanterior cephalograms were taken with the head rotated $5^{\circ},\;10^{\circ}$ superior and inferior each to the reference $position(0^{\circ})$. The 7 height, 5 width and 6 angular measurements were taken at each 5 positions. Through the statistical analysis of all measurements taken at each rotated position, folowing results were obtained.1. The projection errors of height measurements were remarkably target than those of width or angular measure nents. f. Among the height measurements, the farther to the rotation axis the measurements were, the larger the projection errors were. 3. Among the width measurements, mandibular width and mandibular width of mandibular first molars showed significant differences between the values taken at each rotated position, while nasal width, maxillary width and intermolar width of maxillary first molars did not. 4. Among the angular measurements, the angle between horizontal reference line and the line that is connected to crista galli and antegonion or maxillare showed significant differences between the values taken at each rotated Position. The above results suggest that it is needed to the effort to keep constant head position for taking the useful posteroanterior cephalogra, because projection errors are caused by vertical head rotation.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.1
• /
• pp.72-78
• /
• 2012

The rotator cuff is situated in a potential tight subacromial space and undergoes senescent structural changes commonly observed in other joints of the body. When the cuff fails, spontaneous healing of the torn tendon is not expected to occur, and multiple factors may be responsible. Its fibers are under tension and typically retract on tearing. The subacromial bursal inflammation and alterations in normal glenohumeral kinematics have been considered in the development of symptoms. Controversy continues to exist concerning the pathogenesis of rotator cuff disease. The heterogeneity of the disorder, as well as the notion that rotator cuff disease may not actually represent a continuum of the same process, but rather, is a compilation of independent disorders, may partly explain the differing viewpoints on its origin. Two contrasting pathogenetic mechanisms have been extensively described and include vascular, or intrinsic, causes and impingement, or extrinsic, factors. Other etiologies have also been reported that include trauma, congenital or developmental factors, and instability. For successful treatment of the rotator cuff diseases, it is essential to understand the structure and function of rotator cuff and to clarify the pathogenesis and natural history of its disorder.

• 대한관절경학회:학술대회논문집
• /
• 2009.10a
• /
• pp.8-13
• /
• 2009

견갑하근의 단독 파열은 드물고 또 이에 대한 치료와 관련된 논문도 한정적이었으나 최근 관절경 술식의 발달로 견갑하근 파열의 진단과 치료방식이 발전하고 있다. 이러한 관점에서 견갑하근의 중요성이 더욱 대두되었고 이에 견갑하근의 파열양상, 봉합방법 그리고 후상방회전근 개 파열과의 관련성 등이 여러 저자들에 의해서 연구 되고 있다. 즉, 이전까지 관심의 대상에서 제외 되었던 견갑하근의 부분파열이 점차적으로 회전근 개 파열의 중요한 역할을 하며 상완 이두건초염과 오구상완 인대의 내측활차의 손상이 이러한 부분파열의 원인을 제공할 수 있음을 알 수 있다. 그러나 견갑하근 파열에 대한 정확한 원인 인자는 아직 불투명하다.

• 전기의세계
• /
• v.25 no.4
• /
• pp.28-31
• /
• 1976

Thyristor는 많은 전력기기와 결합되어 전기기기 전반의 양상을 크게 변화시키고 있다. 예를 들면 변압기의 불꽃없는 탭이나 회전기의 정류자에 대치되는 무정류자전동기와 그리고 개폐기, 차단기의 대용등을 생각할 수 있다. 전력변환장치로서는 (1)직류전력을 조정하는 목적으로 Thyristor를 일종의 스위치로써 직류전압을 단속시켜 직류평균전력을 제어하는 DC Chopper (2)교류전원에 두개의 Thyristor를 역병렬접속하여 교류전류의 통전기간을 위상제어에 의하여 교류를 제어하는 AC Chopper (3)직류를 교류로 변환하는 자여식 inverter등이 있다. 본 해설에서는 지면관계상 D.C Chopper방식에 대한 기본회로와 그의 이용만을 취급한다.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2006.11a
• /
• pp.76-84
• /
• 2006

석회화 건염은 회전근 개중 극상근 건에 석회가 침착되는 질환으로서 진행 양상에 따라 Formative, Resting, Resorptive phases로 나눈다. 치료는 물리 치료, Puncture, 국소 steroid 주사, 체외 충격파 등 보존적 치료에 반응을 잘 하며, 특히 resorptive phases때의 극심한 통증은 석회 침착 부위에 puncture나 needling lavege를 실시하면 즉각적인 동통 감소 효과와 함께 석회 침착의 자연 소실을 기대할 수 있다. 이러한 보존적 치료에 효과가 없을 경우 수술적 처치를 고려할 수 있는데 최근에는 대부분 관절경을 이용한 석회 제거술을 시행한다. 수술전 견관절 충돌 징후가 있거나 수술 소견상 이를 의심할 만한 소견이 있을 경우 견봉하 성형술을 함께 실시하기도 한다.