• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.79-89
• /
• 2011

Though many studies regarding roundabout have been recently conducted, most of them have focused on operational aspect. Moreover, majority of the previous researches analyzes operational effects of single roundabout, but seldom investigate the effects of multi-roundabouts constructed on road networks. In this study, we seek ways to construct multiple roundabouts on road network maximizing their operational effects. The analysis investigate influence of both adjacent signalized and unsignalized intersections as well as influence of the distance from those intersections to roundabouts. The results show that the optimal distance between two adjacent intersections were calculated to be 150m, and any two intersections located within 150m apart influence each other thus imposing operational restrictions on each other. In addition, those results are confirmed using simulation analysis conducted on the real urban network in Nonheon regional area, Incheon City.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.209-215
• /
• 2011

Roundabout has circular traffic island in the intersection center and is kind of intersection where the automobile bypass circular traffic island. In Korea, the provisional Roundabouts Design Guidelines were published in 2004 by MLTM (Ministry of Land, Transport and Maritime Affairs). This guideline did not discussed domestic traffic circumstance. It just only introduced foreign instances and their guidelines. In addition, the recent National Competitiveness roundabouts as part of the green growth has been concentrated on the interest. In this paper, 90 degree of the 4-legged roundabout was compared with 72 degree, 45 degree, and 30 degree 5-legged roundabouts by micro simulation VISSIM. As a result of analysis, average travel time is decreased when the inscribed circle diameter become bigger the roundabout. 5-legged roundabout until 2,000 volume per hour evaluated to be similar effect at 90 degree of 4-legged roundabout.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.54-67
• /
• 2016

All roundabouts are designed based on "Roundabout Design Guideline, Ministry of Land and Transportation, 2014" in Korea. The guideline also provides the traffic volume criteria to convert from signalized intersections to roundabouts. While the criteria are based on capacity of roundabouts, left-turn ratio and the number of lane on approaches are not considered to calculate the capacity of roundabouts. Therefore it is difficult to apply the traffic volume criteria in the real world. In this study, we studied the impact of left-turn ratio and the number of lane on approaches into capacity of roundabouts using micro-simulation. It was found that the capacity of roundabouts is changed according to left-turn ratio and the number of lane on approaches.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.143-150
• /
• 2011

Roundabouts, which belong to traffic circles, are intersections which are similar to the existing rotary form. Roundabouts recently have been constructed all around the world. And interests in roundabouts are increasing in Korea. However, there are lacks of research on pedestrian volume which has a great influence on operation efficiency of roundabouts in urban area. Therefore, this study suggests efficiency analysis and pedestrian signals in roundabouts according to the pedestrian volume. First, VISSIM simulation was organized to analyse volume of one lane roundabouts in urban area. Second, average delay of intersections was calibrated by VISSIM simulation dividing signalized intersections and non-signalized intersections depending on pedestrian volume. Finally, this study showed that roundabouts are suitable when pedestrian volume was under 200person/hr and traffic circles with a pelican signal are suitable when pedestrian volume was over 200person/hr. And when pedestrian volume and traffic volume are over 600person/hr and 1,500vph respectively, fixed signalized intersections fit well.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.96-109
• /
• 2019

Roundabouts are actively installed to reduce unnecessary congestion and reduce traffic accidents. However, it is difficult to apply more than 450 cars per, hour. In addition, there is a downside to the concentration of delays in certain directions depending on traffic conditions. To compensate for these shortcomings, signal metering was introduced. Signal metering is a technique that gives red signals to adjacent left traffic flow in the event of a delay in a particular direction. The purpose of this study is comparing the effect of signal metering in conventional and special types (turbo roundabout, flower roundabout) of roundabout. VISSIM API is used for analysis. The analysis result show that only conventional roundabout signal metering algorithm reduce delay time per vehicle. As the result of the turbo roundabout and flower roundabout signal metering algorithm increase delay time per vehicle, signal metering algorithm can be applied in conventional roundabout.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.25-32
• /
• 2010

This study deals with the roundabout by flare of entry and exit. The goal is to analyze the relative effectiveness of roundabout by flare of entry and exit. In pursuing the above, this study gives the particular attentions to comparing the performances using VISSIM software. The main results analyzed are as follows. First, the single and double roundabouts are analyzed to have LOS F in the case of total entering vehicles of 2,400pcph and 4,400pcph Second, the roundabouts by entry flare analyzed to have LOS F in the case of total entering vehicles of 2,800~3,200pcph and the roundabouts by entry and exit flare analyzed to have LOS F in the case of total entering vehicles of 3,200~3,600pcph. Finally, result of comparative analysis of roundabout and roundabout by flare of entry and exit, capacity of roundabout by flare of entry and exit are located between 1-lane roundabout and 2-lane roundabout. therefore it analyzed that roundabout by flare of entry and exit can be added to new type roundabout.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.43-52
• /
• 2013

A roundabout is a form of circular intersection in which traffic travels counterclockwise around a central island and in which entering traffic must yield to circulating traffic. It has been known that a roundabout provides substantially better operational and safety characteristics than other intersections including rotaries. Recently, a roundabout has started to be constructed due to its efficiency, safety, and other advantages of a roundabout comparing other intersections in Korea. However, there has been no guideline to be used to decide appropriate intersection types considering given conditions of the intersections. To solve this problem, the guideline with traffic volume to choose the suitable intersection types was developed based on analysis results using the SIDRA software which is generally used to analyze operational effects of roundabouts. It was found that a roundabout is more efficient than signalized intersection when the traffic volume is between 125 and 450 veh/h on one lane road and roundabout is not recommended when there are more than 30% left turn traffic. The optimal traffic volume provided in this research will be usefully used in planing and designing roundabouts in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2009

The roundabout was developed in the United Kingdom to rectify problems associated with these traffic circles. In 1966, the United Kingdom adopted a mandatory "give-way" rule at alt circular intersections, which required entering traffic to give way, or yield, to circulating traffic. However, the roundabout used in United States or Europe do not common use in Korea. The purposes of the study is to comparatively analyze the effectiveness of roundabout. In pursuing the above, this study designs the scenarios which can reflect the directional traffic volumes, and analyzes the average control delay of roundabout and 4-leg signalized intersection by SIDRA. The main study results are as follows. First, when the entering traffic volume are less than 2,000pcph, the single-lane roundabout is analyzed to be more effective than 4-leg signalized intersection. Second, when the entering traffic volume are less than 3,200pcph, the double-lane roundabout is evaluated to be more effective than 4-leg signalized intersection. Third, which is installed left and right turn lane at intersection, area for the roundabout is analyzed to be less than that for general intersection area.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.53-62
• /
• 2009

The purposes of the study is to comparatively analyze the applicability of roundabout to the diamond interchange. In pursuing the above, this study give the particular attentions to comparing the performances of roundabout with those of TWSC and signalized intersection based on the aaSIDRA software. The main study results are as follows. First, when the entering traffic volumes(ETV) are more than 480pcph, the single-lane roundabout is analyzed to be more effective than 4-leged unsignalized intersection and when ETV are $480{\sim}1,880pcph$, double-lane roundabout is analyzed to be more effective than 4-legged intersection Second, when ETV are more than 980pcph at the single-lane intersection and $1,600{\sim}3,680pcph$ at the double-lane intersection, roundabout is analyzed to be more effective than other 3-legged intersections. In summary, when the roundabout installs at the interchange, it is important to consider the range of ETV.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.