• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.73-73
• /
• 2018

최근 매실나무를 기주로 한 겨우살이의 인공재배에 성공함에 따라, 식품 소재로 이용하기 위해 일반성분을 분석하였다. 경기도 남양주시에서 매실나무를 기주로 한 인공재배 겨우살이를 채취하여 동결건조한 후 수분, 조단백질, 조지방, 회분, 탄수화물, 베타카로틴, 비타민 B1, 비타민 B2, 비타민 B3, 비타민C, Ca, Fe, K, Na 그리고 P의 함량을 분석하였다. 조단백질, 조지방, 회분, 베타카로틴, Ca, Fe, K, Na 그리고 P은 AOAC 방법을 이용하여 분석하였고, 탄수화물은 탄수화물(%) = 100 - (조단백질% + 조지방% + 회분% + 수분%) 계산식을 활용하여 산출하였다. 수분, 비타민 B1, 비타민 B2, 비타민 B3, 비타민 C는 식품공전에 제시된 방법에 따라 분석하였다. 동결건조한 매실나무겨우살이의 일반성분은 탄수화물 58.90%, 단백질 22.36%, 회분 11.11%, 지방 5.37%, 수분 2.26% 순으로 함유하였다. 비타민의 함량은 비타민 C 4.78mg/100g, 나이아신 1.87mg/100g, 비타민 A 1.42mg/100g, 비타민 B2 0.73mg/100g 그리고 비타민 B1 0.30 mg/100g의 순서로 많이 함유하였다. 무기질은 K 3141.54mg/100g, Ca 977.77mg/100g, P 309.91 mg/100g, Na 20.13mg/100g 그리고 Fe 8,24mg/100g의 순서로 많이 함유하였다.

• Clean Technology
• /
• v.8 no.4
• /
• pp.199-203
• /
• 2002

To investigate the optimal conditions for biodegradation of toluene by Pseudomonas fluorescens KCTC 1767 in a batch soil-bioreactor, the effects of rpm change from 60 to 180, and temperature change from $15^{\circ}C$ to $30^{\circ}C$ in a batch culture and the flow rate change from 55 mL/min to 85 mL/Min in soil-bioreactor on the biodegradation of toluene were studied. In a batch culture the optimal operating conditons were 60 rpm, and $30^{\circ}C$ at initial pH 7, In a soil-bioreactor the optimal flow rate was 55 mL/min in the flow rate of circulation. The lower flow rate of circulation may help to biodegrade toluene adsorped in soil and dissolved in underground water.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.479-484
• /
• 2013

This study was performed to examine the effect of copper on the biodegradability, nitrification, denitrification and oxygen uptake rate (OUR) using batch reactor and continuous flow stirred tank reactor (CSTR) of anaerobic/anoxic/oxic ($A_2/O$). The results of this study can be summarized as follows. In the case of the effect of copper on organic treatment, the bad effect initiated when it was above 4.5 mg/L copper with batch reactor and above 2.0 mg/L copper with CSTR. Concerning the case on nitrification and removal of nitrogen, it showed bad effect when copper was above 4.5 mg/L with batch reactor for nitrification and 1.0 mg/L with CSTR for the removal of nitrogen. The bad effect on the removal of phosphorus began when it was 4.5 mg/L copper with batch reactor and 2 mg/L copper with CSTR. In the case of OUR, it decreased as microbial activity was affected when copper concentration was above 1.5 mg/L in both case of batch reactor and CSTR.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1143-1150
• /
• 2009

This study was carried out to investigate of aerobic granulation by using sequencing batch reactor(SBR). To make aerobic granular sludge in short period of time, we used polymer. In case of SBR, we have studied on physicochemical characteristics of particle size, settling velocity, surface charge, and specific oxygen utilization rate(SOUR) depending on aerobic particle's formation. The results of running SBR with $5.4kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate and 20 days reaction time showed that aerobic particle size, settling velocity, SOUR, surface charge, polysaccharide/protein(PS/PN) ratio were 2.6 mm, 1.7 cm/s, $346mg{\cdot}O_2/g{\cdot}MLVSS{\cdot}hr,\;(-)0.26{\cdot}meq/g{\cdot}MLVSS$, and 2.06 mg/mg respectively.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.425-434
• /
• 2006

The operability and productivity of continuous processes, especially in petrochemical industries have made remarkable improvement during the past twenty years through advanced process control (APC) typified by model-based predictive control. On the other hand, APC have not been actively practiced in industrial batch processes typified by batch polymerization reactors. Perhaps the main cause for this has been the lack of reliable batch process APC techniques that can overcome the unique problems in industrial batch processes. Recently, some noteworthy progress is being made in this area. New high-performance batch process control techniques that can accommodate and also overcome the unique problems of industrial batch processes have been proposed on the basis of iterative learning control (ILC). In this review paper, recent advancement in the batch process APC techniques are presented, with a particular focus on the variations of the so called Q-ILC method, with the hope that they are widely practiced in different industrial batch processes and enhance their operations.

• Korean Journal of Microbiology
• /
• v.37 no.2
• /
• pp.158-163
• /
• 2001

The effect of phosphate on the production of avermectin B1a was studied. Response surface methodology was applied to optimize the concentration of organic nitrogen sources. The portion of B1b in total avermectins was decreased from 5.8% to 3.0% by the addition of 1.5 g/ι inorganic phosphate to the production medium. Among organic nitrogen sources, soybean meal was the most effective on avermectin biosynthesis. Results showed that B1a productivity was increased by 44.8% in a laboratory scale fermenter cultivation of Streptomyces avermitilis YA99-40 through fed-batch process. A maximal B1a productivity was obtained by repeated 30 and 20 g/ι of glucose feeding at 136 and 206 hour, respectively. The B1a productivity was increased by 86.3% and the proportion of B1a in the total avermectins was improved from 38% to 45% with respect to the control process. These results would be very useful for enhancing productivity of B1a in an up-scaled processes.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1115-1124
• /
• 1996

An MCL(Molten Caustic Leaching) treatment is a chemical refinery process which is used for the desulfurization and demineralization by alkali treatment. The MCL treatment removes ash by converting mineral like Si, Fe, V, Ni etc. in petroleum cokes into soluble salts. The MCL has an advantage minimizing carbon loss in comparison to other desulfurization process. Reaction variables for the desulfurization and demineralization in the study were leaching temperature, leaching time, ratio of caustic to cokes, acid concentration and time for washing, and particle size. At the optimum condition, above 99% of desulfurization and about 90% of demineralization was obtained. FT-IR and SEM analysis showed that the structure and surface of the particle was closely related with the degree of sulfur and ash removal, and leaching temperature as well.

• KSBB Journal
• /
• v.18 no.6
• /
• pp.495-499
• /
• 2003

The effect of operating parameters (reaction temperature and time) and reaction modes (batch and semi-batch) on the behavior of amino acid production from hydrothermal decomposition of fish-derived wastes was investigated. The amino acids obtained in batch experiments at temperature of 250$^{\circ}C$ were mainly alanine (Ala) and glycine (Gly) at maximum yield of 65 and 28mg/g-dry fish, respectively. At relatively lower temperature of 200$^{\circ}C$, the yield of high-molecular-weight amino acids such as aspartic acid (Asp) and serine (Ser) is high, but decreases as temperature increases. It is likely that high-molecular-weight amino acids decompose faster than low-molecular ones. Semi-batch mode of reaction suppressed decomposition of amino acids into organic acids (or volatile materials) by continuously removing the products from the reaction zone as soon as they are formed. Thus, large amount of high-molecular-weight amino acids such as Asp and Ser at this reaction mode was observed.

• Applied Biological Chemistry
• /
• v.32 no.3
• /
• pp.249-254
• /
• 1989

This study was conducted to clarify the relationships between the inorganic constituents contents and the contents of catalpol and free sugars in the rhizoma of Rehmannia glutinosa. Nitrogen contents in rhizoma was positively correlated with the contents of catalpol and ethanol extract, whereas it was negatively correlated with that of ash, galactose and fructose. Calcium contents in rhizoma was highly negatively correlated with the contents of catalpol, ethanol extract and water extract. However, the calcium contents positively correlated with that of ash, acid insoluble ash, fructose and galactose in R. glutinosa. The catalpol cotents was negatively correlated with the contents of ash, galactose and fructose, whereas positively correlated with that of ethanol extract and water extract, and the correlations between extract contents and ash contents showed highly negative significance.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.48-57
• /
• 2024

This study aimed to improve utilization of the Class C vinyl waste generated in rural areas based on a preliminary investigation on the use of eco-powder, generated through pyrolysis, as a raw material for plastic. The efficiency of pre-processing treatments in controlling ash content of the generated eco-powder and its effect on the basic properties of manufactured plastic were evaluated. The basic properties included ash content of the compressed eco-powder at different levels of ash content, impact strength, flexural strength, and tensile strength. The experimental results confirmed that pre-processing improved the separation efficiency of soil particles and vinyl waste through physical impact. The eco-powder with ash content of less than or equal to 26% was found to satisfy the target performance during impact strength, flexural strength, and tensile strength evaluation. Thus, it was confirmed that the Class C vinyl waste, having low utilization and recovery rates, could be effectively utilized as a plastic raw material after optimum thermal treatment and physical processing using the eco-powder.