• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.107-107
• /
• 2012

3종 복합소재인 양모와 나일론, 레이온의 염색공정은 먼저 알칼리 욕에서 반응성염료로 레이온을 염색한 후, 산성욕에서 산성염료로 양모와 나일론을 염색하는 것이 일반적이다. 그런데 양모, 나일론, 레이온은 알칼리에 민감하므로 면 염색 시 적용되는 강알칼리인 수산화나트륨을 사용하면 섬유의 취화로 인하여 강도와 촉감저하 등의 문제가 발생하게 된다. 따라서 본 연구에서는 알칼리 중 탄산나트륨과 중탄산나트륨을 사용하여 염료를 투입하지 않고 염색공정을 거친 후 백도와 인장강도를 측정하여 황변 및 강도 변화 여부를 알아보았다. 레이온 70%, 양모 19%, 나일론 11%의 혼용율을 가지는 전처리 된 편물(130$g/m^2$, 32 inch, 18 gauge)에 탄산나트륨(시약 1급) 20g/l과 중탄산나트륨(시약 1급) 20g/l 각각을 투입하고 반응성염색공정($60^{\circ}C$, 60 min)으로 처리한 경우와 반응성 염색 후 산성염색공정($98^{\circ}C$, 60 min)으로 처리한 경우로 나누어 측색을 통해 백도와 L, a, b값을 측정하고 KS K 0521에 따라 인장강도 시험을 실시하였다. 그 결과, 탄산나트륨 투입시 백도 값이 중탄산나트륨에 비해 10% 정도 낮아지고 L, a, b값도 상대적으로 yellow 방향으로 이동해 있는 것으로 나타났다. 이것은 황변이 일어남을 의미하며 육안으로 확인하였다. 또한 인장강도 측정결과를 통해 소다회 처리 시 중조에 비해 30% 정도의 강도 저하가 일어남을 확인할 수 있었다. 그러나 반응성염색 후 산성염색을 거치게 되면 황변과 강도 저하 현상이 회복되는 경향을 나타내었다. 즉, 천연/나일론 편물을 반응성염색 시 알칼리로 탄산나트륨을 사용하면 염색공정 상에서 중탄산나트륨에 비해 황변이 일어나 염료 고유의 색상 발현에 영향을 줄 수 있고 강도 또한 30% 정도 저하되지만, 후에 산성염색 공정을 거치면 산 조건과 욕중 효과를 통해 일부 개선됨을 확인하였다. 이와 별도로 이번에는 시판되는 반응성염료 5종과 산성염료 3종을 조합하여 탄산나트륨과 중탄산나트륨 투입에 따른 염색실험을 실시하고 측색(DataColor SF600 광원D65, Strength)을 통해 염착량을 비교하였다. 그 결과, 중탄산나트륨으로 염색하면 탄산나트륨에 비해 모두 염착량이 저하되었으며, 염료의 구조적 차이와 컬러별로도 그 차이는 다양하였다. 그 중 저온에너지형 반응성염료는 탄산나트륨 투입에 비해 47~60% 정도로 가장 양호하였으며, 일부 반응성염료는 20%까지 떨어지는 값을 나타내었다. 이것은 탄산나트륨보다 중탄산나트륨의 알칼리 정도가 낮으므로 반응성염료의 염착이 적은 것으로 생각되며, 저에너지형 반응성염료의 경우에는 낮은 온도나 알칼리 조건에서도 상대적으로 높은 고착률을 나타내므로 적절한 반응성염료의 선택을 통해 그 차이를 극복할 수 있을 것으로 사료된다. 이상의 결과를 통해 탄산나트륨과 중탄산트륨의 알칼리 정도가 강도와 염착량에 미치는 영향의 차이를 고려하여 최적의 현장 처방을 선정해야 함을 알 수 있었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.152-158
• /
• 2015

This paper investigated the membrane fouling potential at the state of passive adsorption which is no permeation with the test modules on COD (Chemical oxygen demand) loading rates, examined the recovery rate and resistance on membrane fouling by three cleaning manners of hydrophobic membrane in a bioreactor. The results showed that high COD loading led to the increase of extra-cellular polymeric substances and filtration resistance. The permeability resistance from 1st day to 63rd day was getting increased, however, the value of permeability resistance after 63th day during the operation period was almost same level at three COD loading rates, it was due that the biomass adhesion on membrane surface at the state of passive adsorption reached to the critical state. Also, the final recovery rates after three cleaning manners were 78%, 72% and 69% at the COD loading concentrations of 250 mg/L, 500 mg/L and 750 mg/L respectively, and then recovery rate by physical cleaning at Run 2 and Run 3 was decreased after 40th day, it proved that biomass cake, which is not easily removed, was formed on the membrane surface because of high COD loading rate and EPS concentration.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.84.2-84.2
• /
• 2018

최근 사람의 후각으로는 감지하기 어려운 유해, 폭발성 가스로 인한 안전사고 발생이 많아짐에 따라 높은 감도를 지닌 가스 센서의 필요성이 커지고 있다. 특히 가스 검지층으로 감도 및 안정성이 뛰어난 $SnO_2$를 이용한 가스 센서 연구와 더불어 촉매 효과에 대한 연구도 활발히 진행 중이다. 본 연구에서는 물리기상증착 공정의 증착압력 등 조건들을 변화시켜 형성한 다공성 나노 구조의 $SnO_2$ 가스 검지층 위에 촉매물질을 Sputtering 방식을 이용하여 증착하였다. SEM 분석을 통해 $SnO_2$ 검지층 내 촉매물질의 분포를 확인하였다. IDT 전극 기판 위에 먼저 나노 구조의 $SnO_2$ 가스 검지층을 형성하였고 그 후에 촉매물질을 증착하였다. 제작된 샘플은 $700^{\circ}C$에서 1시간동안 튜브 퍼니스로 열처리를 진행한 뒤 챔버 내에서 측정을 진행하였다. 측정은 $300^{\circ}C$에서 CO 농도, 습도를 변화시키며 감도, 반응시간, 회복시간에 대하여 분석하였다.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.339-347
• /
• 2019

Forward osmosis (FO) is operated at a lower pressure than reverse osmosis (RO), which has great advantages in terms of fouling control, maintenance, membrane cleaning, and potential energy reduction. In particular, since the membrane fouling layer of the forward osmosis process has a relatively loose and dispersed property, it is possible to control the membrane fouling by physical cleaning, unlike the reverse osmosis process. However, existing studies do not apply the proper cleaning flow rate for forward osmosis physical cleaning, and thus there is a limit that the optimal operation can not be performed. Therefore, this study aims to evaluate the justification of proper flow rate that can show high efficiency cleaning with economical energy amount. The membrane fouling experiments of the forward osmosis process were maintained at a circulating flow rate of 8.54 cm/s and the recovery rates were compared with the three cleaning flow rates. As a result of this experiment, it was confirmed that the 2 × speed cleaning showed the same efficiency as the water permeability recovery rate of the 3 × speed cleaning, and it was confirmed that the 2 × speed cleaning was an appropriate flow rate with high cleaning efficiency and economical SEC.

• Korean Journal of Social Welfare
• /
• v.64 no.1
• /
• pp.79-100
• /
• 2012

The predominant concern of the study consist in: (1) the direct effect of social commitment on teachers' intervention efficacy for helping both victims and offenders in school violence situation; (2) the indirect effects of both teachers' perceptions of offenders and victims, and fairness of school regulations on teachers' intervention efficacy. Research is based on a survey conducted with 351 teachers(84 males and 267 females) from 10 middle schools located in different districts of the city of Daegu. In order for subjects to verify research questions, structural equation models in teachers' intervention efficacy for helping both victims and offenders were explored. In order to verify the difference between mediators' effect, along with total indirect effect and each individual mediator's effects, bias-corrected bootstrapping analysis by using Mplus were employed. The major findings of the study supported the significance on direct effect of social commitment, and indirect effect of both fairness of school regulations and teachers' perceptions toward offenders and victims, on teachers' intervention efficacy. However, the indirect effect of fairness of school regulations(.025) was far outweighed by teachers' perceptions(.224) toward offenders and victims. In conclusion, the above findings claim our attention in that they provide a range of practical implications for teachers and other related professionals including school workers who are engaged in helping out both victims and offenders in school violence situation.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.294-299
• /
• 1994

CHF$_{3}$/CH$_{4}$Ar 플라즈마에 의해 형성된 산화막 식각 잔류물의 화학구조와 이 잔류물의 제거를 위한 세정방법을 x-ray photoelectron spectroscopy를 이용하여 조사하였다. 잔류무르이 구조는 CF$_{x}$-polymer와 Si-C, Si-O 결합으로 이루어진 SiO$_{y}$ C$_{z}$ 이었다. CF$_{4}$O$_{2}$ 플라즈마에 의한 silicon light etch는 산화막 식각 잔류물인 SiO$_{y}$ C$_{z}$ 층과 손상된 실리콘 표면을 제거하엿으며 NH$_{4}$OH-H$_{2}$O$_{2}$과 HF용액으로 완전히 제거되는 CF$_{x}$-polymer/SiO$_{x}$층을 남겼다. 100.angs.정도의 silicon light etch는 minority carrier life time과 thermal wave signal값을 초기 웨이퍼 수준까지 회복시켰으며 접합누설 전류도 거의 습식 식각 공정수준까지 감소시켰다.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.77-86
• /
• 2021

This study aims to systematically review literature on organizational socialization in the field of nursing. The keywords of 'organizational socialization' and 'nursing' were combined with the AND operator, and the author analyzed the total of 26 journal articles published between 2010 and 2020. The number of journal articles on organizational socialization has increased since 2016, and all the articles took an descriptive study approach. It was found that the variables of resilience, role stress, perception of justice, bullying, professional self-concept, and organizational climate could affect organizational socialization, and the variables of intention to leave, intention on retention, resilience, and organizational commitment could be affected by organizational socialization. The result of this study can be used for guiding organizational socialization research in nursing.

• 전기의세계
• /
• v.14 no.3
• /
• pp.37-40
• /
• 1965

전기기구의 절연성을 향상시킨다는 것은 품질이나 수명을 향상시키는것과 똑같은 의의를 갖는 것이며, 따라서 기기의 수명은 절연성에 있다해도 과언이 아니다. 절연내력을 높이기 위해서는 질량의 절연재료와 고도의 절연가공기술 및 절연구조의 개량등의 요건을 필요로 하나 건조 처리기술에 의하여도 상당히 전기특성을 회복시킬수 있다. 주지의 사항과 같이 건조 처리법에는 열풍건조법, 열유(분무 및 순환) 건조법증기건조법, 전류건조(냉상전류법 및 단락순환건조법)법, 등등에 진공건조를 병용한 처리법이 있으며 어떤나라의 전력계통에서도 계통의 감시 또는 정기보수시 전력용 변압기를 건조(현지)해야 되는 작업은 기기 maker에서 공장건조해야 되는것과 똑같이 거쳐야 하는 공정중의 하나인 것이다. 여기서 언급코져 하는 변압기 tank 유도가열법은 본인이 일본 삼릉전기에서 연수중 조사한 바 있는것으로서 소련, 일본등지에서는 벌써부터 타 건조처리법과 병용해서 척용하고 있으며, 보유하고 있는 건조실의 size가 적을때나 또는 수송 제한조건때문에 현지 조립을 요하는 지역에서는 편리한 처리법의 하나라 할 수 있다. 이하 그 설계 계산법과 설계예를 간략한다.

• Ecology and Resilient Infrastructure
• /
• v.3 no.3
• /
• pp.182-188
• /
• 2016

This study evaluated structural alternatives for managing water quality problems by reinterpreting and then applying the robustness-cost index (RCI) for urban flood problems. Cases of endogenous hormone pollution in treated sewage and proliferation of protozoa in intake-water were chosen as representative examples because they have different types of regulation standards for the treatment. Current facilities and structural alternatives with robustness indices (RIs) greater than unity were determined to be robust. The RI was combined with the cost index (CI) to obtain the RCI values. For the endogenous hormone pollution in treated sewage, a human-oriented estrogen $17{\beta}$-estradiol was selected as a target pollutant. The RI and RCI values for a structural alternative, extension of the current sewage treatment facility for advanced treatment, were greater than the values for the current practice of conventional activated sludge process. For the intake-water pollution by protozoa, UV and ozone disinfection facilities were evaluated for inactivation of Cryptosporidium parvum. The RCI values for ozone disinfection were greater than those for UV disinfection. Based on the results and the logics involved in the calculation of RCI for water quality issues we studied, we proposed procedures for establishing and implementing structural alternatives for the restoration from and prevention of outbreaks of water quality problems.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.155-163
• /
• 2017

Membrane filtration has become more popular in drinking water treatment recently, since the filtration can control not only particulate matters but also pathogenic microorganisms such as giardia and cryptosporidium very effectively. Pilot-scale ($120m^3/d$ of treatment capacity) and test-bed ($25,000m^3/d$ of treatment capacity) microfiltration experiments were conducted to find optimum operating mode and the critical flux. Optimum operating mode of pilot-test was assessed as inflow 1.0 min, filtration 36.5 min, air backwash 0.9 min, backwash 1.0 min and outflow 1.0 min with 50 LMH ($L/min{\cdot}m3^$) of critical flux. Critical Flux was calculated to be $50L/m^2-h$ (within TMP 0.5 bar) based on the increase formula of the transmembrane pressure difference according to the change of time at Flux 20, 40, 56 and 62 LMH in pilot operation. Chemical cleaning was first acid washed twice, and alkali washing was performed secondarily, and a recovery rate of 95% was obtained in the test-bed plant. The results of operating under these appropriate conditions are as follows. Turbidity of treated water were 0.028, 0.024, 0.026 and 0.028 NTU in spring, summer, autumn and winter time, respectively. Microfiltration has superior treatment capability and performance characteristics in removing suspended solids and colloidal materials, which are the main cause of turbidity and important carrier of metal elements, and it has shown great potential in being an economically substitute to traditional processes (sand filtration).