• Composites Research
• /
• v.29 no.3
• /
• pp.117-124
• /
• 2016

The failure strength of composite single-lap joint repaired using scarf patch was investigated by test and finite element method. A total of 45 specimens were tested changing scarf ratio, stacking pattern, and defect size to study the failure strength and mode. Except for one case, all repaired specimens showed the equal or higher strength than the sound specimens and the effect of considered repair parameters was not remarkable. It was found through the failure mode inspection that the surface treatment for bonding was not enough in the case which failed at the lower load than the sound specimen. Three-dimensional finite element analysis was conducted to verify the test results. It was confirmed that the considered repair parameters do not significantly affect the stress distribution of the specimens. It was also observed that the applied tensile load is relieved passing through the overlapped region thickness of which is almost double. From this study, it is concluded that if the bonding procedure for adherends and patch including surface treatment for fabric layer is thoroughly followed, the strength of repaired single-lap joint can be restored up to the strength of sound one.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.153-156
• /
• 1983

1950년(年) 이후(以後) 무연탄(無煙炭)으로 만든 연탄(煉炭)을 취사(炊事), 난방용(煖房用)으로 가정(家庭)에서 광범위(廣範圍)하게 사용(使用)하게 되면서 연탄(煉炭)가스내(內)의 일산화탄소(一酸化炭素)로 인(因)한 중독사고(中毒事故)가 빈발(頻發)하여 심각(深刻)한 국민보건(國民保健)의 문제(問題)가 되어왔다. 저자(著者)들의 실태조사(實態調査)(1975년도(年度))에 의(依)하면 서울특별시일원(特別市一圓)에 있어 일산화탄소중독(一酸化炭素中毒)의 년간발생(年間發生)은 인구(人口), 10만당(萬當) 경증(輕症) 260명(名), 혼수상태(昏睡狀態)의 중증중독(重症中毒) 45명(名), 사망(死亡) 1명(名)으로 위험인구(危險人口)를 3,000만명(萬名)으로 하였을 때 전국적(全國的)으로 일산화탄소중독(一酸化炭素中毒)의 추정발생수(推定發生數)는 년간(年間) 경증(輕症) 78만명(萬名), 중증(重症) 13만(萬) 5천명(千名), 사망(死亡) 3,000명(名)으로 그 피해(被害)의 규모(規模)가 100만을 육박(肉薄)하는 가공(可恐)할 수자(數字)를 보여주고 있다. 저자(著者)들은 이러한 심각(深刻)한 국민보건(國民保健)의 문제(問題)를 우선(于先) 실천가능(實踐可能)한 제이차예방(第二次豫防)에 역점(力點)을 두어 고압산소요법(高壓酸素療法)을 보급(普及)할 목적(目的)으로 일인용고압산소장치(一人用高壓酸素裝置)를 개발(開發)하고 1969년(年) 1월(月)에 서울대학교병원(大學校病院)에 고압산소치료실(高壓酸素治療室)을 개설(開設)하여 급성일산화탄소(急性一酸化炭素) 중독환자(中毒患者)에 대(對)한 응급치료(應急治療)를 실시(實施)하여 1978년(年)까지 10년간(年間)의 치료결과(治療結果)를 요약(要約)한바 다음과 같다. 1. 총치료환자수(總治療患者數)는 2,242명(名)이고 회복(回復)된 수(數)는 2,202명(名)으로 98.2%의 회복률(回復率)을 보였다. 2. 계절적(季節的)으로 10월(月)에서 4월(月)까지가 연중최성기(年中最盛期)이나 5월(月)에서 9월(月)까지도 적지않은 환자(患者)의 발생(發生)을 볼 수 있었다. 3. 연령별분포(年齡別分布)를 보면 15세(歲)${\sim}29$세군(歲群)이 전체환자(全體患者)의 반이상(半以上)인 52.7%를 차지하고 있고 $0{\sim}14$세군(歲群)은 인구비(人口比)에 대해 발생(發生)이 훨씬 적은 결과(結果)를 보이고 있다. 4. 도착시간별(到着時間別) 입원율(入院率)은 오전(午前) 10시이후(時以後) 도착군(到着群)서부터는 입원율(入院率)이 급증(急增)하는데 이는 병원도착(病院到着)이 늦일수록 당일회복(當日回復)이 되지못하고 입원가료(入院加療)하게 됨을 나타내주는 결과(結果)라 할 수 있다. 5. 병발증(倂發症)으로는 급성욕창, 폐렴(肺炎) 및 신경학적(神經學的) 이상등(異常等)의 소견(所見)을 많이 볼 수 있었다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.97-109
• /
• 2010

Purpose : This study was designed to evaluate the influence of implant abutment materials on detorque value and screw joint stability before and after dynamic fatigue test. Materials & Methods : The external hexagonal fixture and three different groups of abutment (titanium abutments, zirconia abutments, and UCLA abutments) were used. The detorque value before loading and after loading (cyclic loading up to $10^5$ cycles) of the abutment screw were measured. Result : 1. There was no significant difference in detorque value before loading among the each group. 2. There was no significant difference in detorque value after loading among the each group. 3. Detorque values before and after cyclic loading in each group were not significantly different. 4. There was no significant difference in loss percentage of removal torque before loading among the each group. 5. There was no significant difference in loss percentage of removal torque after loading among the each group. 6. There was no significant difference in loss percentage of removal torque according to loading among the each group. Conclusion : Short term screw loosening of three types of abutment was not significantly different. When bite force was applied, there was no significant difference in screw loosening between before loading and after loading.

• Korean Journal of Social Welfare
• /
• v.66 no.1
• /
• pp.251-276
• /
• 2014

This study scrutinizes the common sense in the field of disability employment that the bigger the size of a firm, the lower the employment rate of people with disabilities. This common sense has been established by conventional cross-tabulation and multiple regression analyses without taking into account possible interactions between the sizes of firms and the industries in which they operate. This study shows that the distribution of the disability employment rate violates the linearity and homoscedasticity assumptions of the OLS. In an effort to find models that explain the data better, this study fits the OLS model, the weighted linear regression model, and the multinomial logit model as well as the path analysis which is meant to examine the relationships between firm size and other variables relevant to disability employment. The result shows that, when an interaction term between firm size and industry is added to the model, firm size does not have any significant effect on disability employment rate for those firms with 100 or more regular employees, to the contrary of the findings of prior studies. It also demonstrates that other factors such as job setting, the extent of helpfulness of disability employment employers perceive, employers' care for disability, and employers' awareness of disability policies may matter more than does firm size. This study proposes that future research and policy implementation for disability employment should pay no less attention to industry and other factors mentioned above than to firm size.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.581-587
• /
• 2020

The Many patients who have lumbar instability(LI) could make a different trunk movement pattern by reduction of their respiratory function and altered breathing pattern. This study was conducted to investigate the change in the thoracoabdominal usage rate(TAUR) on three circumference lines(axillary, xiphoid junction, 10th rib) during the resting and forced breathing (RB and FB) after respiratory pattern correction(RPC) exercises in patients with LI. 15 patients in the experimental group performed RPC exercises, and 15 patients in the control group conducted lumbar stabilization exercises. Before the intervention, both groups had a significant difference in the usage rate among the three thoracoabdominal lines during the RB and FB(p<.05). After the intervention, the experimental group was seen no significant difference in the usage rate among the three lines during the RB(p>.05) and exhibited significant differences in the usage rate between the two thoracoabdominal lines during the FB(p<.05). The RPC exercises might improve the trunk movement patterns by restoring the respiratory patterns. We suggest that the RPC can apply in the re-education and reinforcement process at the reha-program for LI patients.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.79-91
• /
• 1995

Precision forming of electronic components has appeared to be competitive according to manufacturing cost and dimensional tolerances. Now domestic electronic companies have been involving in utilization of the finite element method in process design of precision forming. A forming process to produce an electronic component, aperture, has been inbestigated to find out forming defects during multi-operations. The applications of the commercial FEM software MARC show a possibility of defect in precision coining process among the whole multi-process. Thus the coining process of three-dimensional deformation is analyzed using DAMF-3D which has been developed in this lab with the rigid-plastic algorithm. The result f simulations by DAMF-3D provides clear description of the defect involved in the coining process.

• Feed Journal
• /
• v.4 no.10 s.38
• /
• pp.132-137
• /
• 2006

목장 경영의 성공과 실패에는 여러 가지 요인이 작용하지만 연중 얼마나 적은 소가 도태되는가 하는 것 또한 아주 중요하게 생각해 보아야 할 사항이다. 낙농에 있어 거의 대부분의 질병이 산욕기에 발병하는데 산욕기(産褥期)란 분만으로 인한 상처가 완전히 낫고, 자궁이 평상시 상태가 되며 신체의 각기관이 임신 전의 상태로 회복되기까지의 기간으로 대개 분만 후 6~8주간을 말한다. 산욕기에 주로 발생할 수 있는 다양한 질병(산욕기 부전마비, 난산, 급성유방염, 제4위 전위증 등)들이 조기에 발견되어 적절히 치료되지 못하고 만성화되면서 전해질불균형, 에너지와 단백질의 섭취부족에 의한 영양장애로 허약과 지방간 및 케토시스 등으로 진행되어 결국 도태됨으로서 목장 경영에 있어 막대한 영향을 끼치는 것이다. 이러한 산욕기 질병의 주 원인은 건유기 사양관리에 있다. 건유기간 동안 체점수(BCS)의 변화를 최대한 줄이면서 분만전의 스트레스를 얼마만큼 줄일 수 있도록 관리하는가에 달려있다. 다시말해 분만 전 마지막 한달간에 건유에서 분만으로의 이행과정을 얼마나 매끄럽게 연결 지어주는가에 따라 산욕기 질병의 발생률이 결정되는 것이다. 본 고에서는 건유기 사양관리 소홀로 발생되는 산욕기 부전마비에 관해서 자세히 설명해 보고자 한다.

• Clinical and Experimental Pediatrics
• /
• v.50 no.12
• /
• pp.1261-1265
• /
• 2007

Extrarenal manifestations of hemolytic uremic syndrome (HUS) have increasingly been recognized and may be major determinants of mortality and morbidity. Although microthrombi are often found in the pulmonary and coronary circulation, apparent lung and cardiac involvement are clinically infrequent. We describe here a 10-month-old boy with HUS who developed pulmonary hemorrhage, acute respiratory distress syndrome and dilated cardiomyopathy. Complete renal as well as clinical recovery from these very uncommon complications was achieved by optimum supportive care.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.464-471
• /
• 2003

Among various methods to acquire high strength in plain carbon steel, the mettled of grain refinement by controlling thermo-mechanical processing parameters has gained a great attention if steel rolling industries. In the present study, three different rolling pass schedules are proposed to obtain fine grains which are based on combined results of recrystallization modelling, finite element analysis and experiment. Since meta-dynamic or dynamic recrystallization has been found to be very effective in producing fine grains, reduction ratio and interpass time in the proposed rolling pass schedules were determined in order to invoke such recrystallization as often as possible.

• 해운
• /
• s.83
• /
• pp.12-16
• /
• 2011

2011년 하반기 세계경제는 고유가와 유럽 재정우기 등 상반기 충격요인들의 향배에 의해 결정될 것이다. 3분기에도 4%대의 소비자물가 상승세가 이어지면서 국내경기는 하반기 중 회복의 활력이 세지 않을 전망이다. 원화절상, 일본 대체효과 소멸 등으로 수출활력이 다소 둔화되고 설비투자도 대기수요가 충족되면서 상승세가 꺾일 전망이다. 이에 따라 2011년 하반기 국내경제 성장률은 4.5%, 연간으로는 4.1% 수준을 기록할 것으로 전망된다. 가계부채, 건설사 및 저축은행 부실문제 등이 우리경제의 장기적인 불안요인으로 작용하겠지만 단기간 내 경제에 심각한 충격을 줄 정도는 아닌 것으로 보인다. 하반기 중에도 물가안정 대책에 초점이 두어져야 하며 단계적인 정책금리 인상으로 기대 인플레이션 상승을 억제할 필요가 있다. 하반기의 시작점에서 경제악화 요인들은 어떠한 것들이 있으며, 효과적으로 대처하기 위해서 현재의 상황과 앞으로의 전망을 살펴볼 필요가 있다. 다음은 LG 경제연구소에서 발표한 "2011년 하반기 세계경제 환경 및 국내경제 정책 전망"의 주요 내용을 정리 요약한 것이다.