• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.18-29
• /
• 2010

Offshore subsurface storage of $CO_2$ is regarded as one of the most promising options to response severe climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the offshore subsurface geological structure such as the depleted gas reservoir and deep sea saline aquifer. Since 2005, we have developed relevant technologies for marine geological storage of $CO_2$. Those technologies include possible storage site surveys and basic designs for $CO_2$ transport and storage processes. To design a reliable $CO_2$ marine geological storage system, we devised a hypothetical scenario and used a numerical simulation tool to study its detailed processes. The process of transport $CO_2$ from the onshore capture sites to the offshore storage sites can be simulated with a thermodynamic equation of state. Before going to main calculation of process design, we compared and analyzed the relevant equation of states. To evaluate the predictive accuracies of the examined equation of states, we compare the results of numerical calculations with experimental reference data. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_{2}O$, $SO_{\chi}$, $H_{2}S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. This paper analyzes the major design parameters that are useful for constructing onshore and offshore $CO_2$ transport systems. On the basis of a parametric study of the hypothetical scenario, we suggest relevant variation ranges for the design parameters, particularly the flow rate, diameter, temperature, and pressure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.259-268
• /
• 2005

Most of the tailings have been left without any management in their mines and have become the main source of serious environmental problems in nearby groundwater, stream and cultivated lands. To compare fractionation and potential mobility of heavy metals in tailings and paddy soils near abandoned 10-metalliferous mines in Korea, the distribution and chemical fractions of heavy metal and their mobility in relation to chemical compositions were investigated. The pollution index of heavy metal in mine tailing calculated with the permissible levels were in the order Cheongyang>Dogok>Beutdeun>Baegwoul mine, which were considered sufficient to raise environmental problems. The rates of 0.1M-HCl extractable Cd, Cu, Pb, Zn, and Ni to total content in paddy soils were 49.1, 50.7, 26.8, 18.4 and 2.9%, respectively, and their rates of heavy metals in paddy soils were higher than that of mine tailing. Dominant chemical forms of heavy metals in tailings were sulfide and residual form (63-91%), specially, the exchangeable portion of Cd (21%) was relatively higher than that of other metals in paddy soils. The mobility factor of heavy metals in tailings and paddy soils was in the order Cd>Zn>Cu>Pb, and the mobility factor in tailing varied considerably among the mines. The potential mobility of heavy metals in tailings showed significant positive correlation with water-soluble $Al^{3+}$ and $Fe^{3+}$ contents, while in paddy soils, it correlated negatively with soil pH values.

• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.2
• /
• pp.105-118
• /
• 2006

Isolation and Identification of fatty acid and volatile compounds in tuna fish oil were successfully carried out using supercritical carbon dioxide. Samples of the oil were extracted in a 56 ml semi-batch stainless steel vessel under conditions which ranged from 80 to 200 bar and 40 to $60^{\circ}C$ with carbon dioxide flows from 10 ml/min. Volatiles in the oil extracted from the samples with supercritical carbon dioxide were analyzed by gas chromatography, mass detector with canister system. The extracts were contained with various fatty acids, 57.0% of unsaturated fatty acids such as docosahexaenoic acid(DHA) and eicosapentaenoic acid(EPA), and 43.0% of saturated fatty acids. The aroma compounds in the oil showed over 129 peaks, of which 100 compounds were identified. Volatile components included 2,4-hepatadienal(fishy), dimethyldisulfide (unpleasant), dimethyltrisulfide (unpleasant) and 2-nonenal(fatty). The isolation efficiency of the volatile compounds from the samples was 99.4% at $50^{\circ}C$ and 200 bar.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.2
• /
• pp.76-90
• /
• 2018

To determine the distribution of mercury (Hg) in the coastal surface sediments around the Korean peninsula, the baseline concentration of Hg was estimated, the extent of contamination was assessed, and the factors controlling the distribution were discussed. The concentrations of Hg in surface sediments were significantly high in Jinhae-Masan Bay in the South Sea, Ulsan-Onsan Bay and Yeongil Bay in the East Sea, but Hg in other sediments showed a similar distribution to Cs and relatively very low concentration between 0.21 and $39.5{\mu}g/kg$ ($13.6{\pm}7.80{\mu}g/kg$). Compared to the sediment quality guidelines in Korea, 8 % of the surface sediments (n=282) analyzed in this study exceeded the values of the threshold effects level (TEL), and six sediments collected around Onsan Port were higher than the value of the probable effects level (PEL). The contamination levels of Hg were assessed by the enrichment factors using the baseline concentration (2.06Cs+1.75) based on the residual analysis from the linear regression line for Cs, and further, factors controlling the distribution of Hg were discussed by the comparison with geochemical substances depending upon the Hg enrichment level. Hg concentrations were correlated well with Cs concentration in the range of less than 1.69 of EF implying grain size control, while in the range of 1.69 and 4.03 Hg concentrations were correlated well with Fe oxyhyroxide and organic carbon contents, which indicates Hg was enriched by superior sorption capability. On the meanwhile, samples with higher EFs (4.03 to 74.9) showed fairly positive correlations with other metals (Cu, Zn, Pb) rather than geochemical substances. For samples in Youngil Bay and Ulsan-Onsan Bay (n=30), Hg concentrations were correlated only with other metals rather than geochemical substances implying simultaneous supply of metal particles from metal refineries. But samples at Gosung, Sokcho and Uljin coast were correlated well with organic carbon even though they had high EFs. In addition, samples in Jinhae-Masan Bay with high contents of S were enriched by relatively high sulfide formation.

• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.227-236
• /
• 2010

This study was conducted to develop an measuring system and method for fermentation degree of liquid swine manure by visible ray. The constituent changes of liquid swine manure were examined. pH gradually increased with time, but EC gradually decreased. Malodor strength decreased gradually with aeration treatment with time. Control needed more time to decrease malodor strength than aeration treatment. In aeration treatment, there was no germination of seeds (radish, chinese cabbage) up to 6 weeks and germination rate at 15th week was over 50%. However, in control, there was no germination up to end of experiment. Circular chromatography method showed that there was change after 10th week in aeration treatment but there was no change up to end of experiment in control. As a result, the fermentation degree of liquid swine manure would have relations among pH, EC, germination rate, malodor concentration, and reaction of circular chromatography. The simple analytical instrument for liquid swine manure consisted of a tungsten halogen and deuterium lamp for light source, a sample holder, a quartz cell, spectrometer for spectrum analyzer, a malodour measuring device, a software, etc. Results showed that the simple analytical instrument that was developed can approximately predict the fermentation degree of liquid swine manure by visible ray. Generally, the experiment proved that the simple analytical instrument was reliable, feasible and practical for analyzing the fermentation degree of liquid swine manure.

• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.193-204
• /
• 2010

The goal of this study was to develop a high-rise hog building(HRHB) for growing-fattening stages. HRHB was two story building and was suitable for specific environment in Korea. Manure was treated in a first floor and pigs were raised on the slatted second floor. Three ventilation systems - 1) duct inlet to wall exhaust system(V1), 2) eave inlet to wall exhaust system(V2), and 3) ceiling inlet to wall exhaust system(V3) - were used. This experiment was conducted during winter and from summer to fall. Air temperature, air speed, ammonia, hydrogen sulfide in HRHB, and swine growth rate were measured. During winter, air temperature in V1 system tended to be slightly high without any effect of outside air temperature. Maximum temperature from summer to fall was between 33.4 and $33.8^{\circ}C$ and there was no significant difference among systems. Continuously measured daily temperature was lower in V2 system than other systems and the fluctuation of air temperature was high. Air speed in V1 and V2 systems were similar (0.02~0.21 m/s), and was 0.04~0.15 m/s in V3 during winter. From summer to fall, air speed in V1, V2, and V3 systems were 0.10~0.41 m/s, 0.10~0.83 m/s, and 0.11~0.26 m/s, respectively. V2 system showed bigger fluctuation of air speed than other systems. During winter, the highest concentrations of ammonia in V1, V2, and V3 systems were 7.0, 3.5, and 8.7 ppm, respectively. Hydrogen sulfide was not detected. The highest concentrations of ammonia from summer to winter in V1, V2, and V3 systems were 6.1, 2.8, and 5.6 ppm, respectively. Swine growth showed no statistical significance among systems. However, daily weight gain was approximately 4% higher in V1 and V3 than in V2. Feed intake/daily weight gain was approximately 4% higher in V1 than other systems. From summer to fall, daily weight gain in V1 and V3 tended to approximately 3% higher than other systems, and feed intake/daily weight gain was approximately 2% higher in V1 than other systems. Hence, V2 system for the ventilation system of HRHB should not be utilized.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.211-218
• /
• 2007

This study was carried out to develop the technique for manufacturing activated carbon from livestock manure and to analyse it's odor absorptiveness. Each of layer manure(LM), litter from broiler house(BL) and litter from dairy barn(DL), compost from layer manure(LC) and pig manure(PC), and coconut shell(CS) was used as a raw material. Activated carbon by grinding the raw material, adding the coal tar as a binder, palletizing, drying, heating with $N_2$ gas at $400^{\circ}C$ for 1 hour, activating by reaction with steam at a temperature of $750^{\circ}C$ for 1 hour. Moisture contents of raw material was 44.9% in layer compost, 71.9% in layer manure, 24.4% in broiler litter, 47% in pig manure compost and 33.9% in dairy litter. Volatile matter in layer compost, layer manure, broiler litter, pig manure compost and dairy litter was 18.8%, 31.0%, 49.8%, 22.3% and 11.6%, respectively. Surface area(BET) of activated carbon from layer compost, layer manure, broiler litter, pig manure compost, dairy litter and coconut shell was 259.8, 209.8, 63.5, 442.3, 812.9 and $1,040\;m^2/g$, respectively. Activated carbon made by livestock manure or litter were examined with scanning electron microscope, and micropore was a type of sponge like particles honeycombed with chambers. Pore size of activated carbon was ranged from 0.39 to $5.02\;{\AA}$, but coconut shell was $0.30\;{\AA}$. Iodine absorptiveness of activated carbon from livestock manure was $530{\sim}580mg/g$. But activated carbon made by coconut shell was 1000 mg/g. Each activated carbon could absorb odor compound very well. Absorptiveness of activated carbon from layer manure for hydrogen sulfide and trimethyl amino was 74.5% and 73.9% at the accumulated flux of 60,000 ml, but, in the case of ammonia was only 15.2% at the accumulated flux of 10,000 ml

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.197-203
• /
• 2019

This study was carried out to investigate the effect of chlorine water and plasma gas treatment on the quality and microbial control of Latuca indica L. baby Leaf during storage. Latuca indica L. baby leaves were harvested from a plant height of 10cm. They were sterilized with $100{\mu}L{\cdot}L^{-1}$ chlorine water and plasma-gas (1, 3, and 6hours), and packaged with $1,300cc{\cdot}m^{-2}{\cdot}day^{-1}{\cdot}atm^{-1}$ films and then stored at $8{\pm}1^{\circ}C$ and RH $85{\pm}5%$ for 25days. During storage, the fresh weight loss of all treatments were less than 1.0%, and the carbon dioxide and oxygen concentrations in packages were 6-8% and 16-17%, respectively for all treatments in the final storage day. The concentration of ethylene in the packages fluctuated between $1-3{\mu}L{\cdot}L^{-1}$ during the storage and the highest concentration of ethylene was observed at 6 hours plasma treatment in the final storage day. The off-odor of all treatments were almost odorless, the treatments of chlorine water and 1 hour plasma maintained the marketable visual quality until the end of storage. Chlorophyll content and Hue angle value measured at the final storage day were similar to those measured before storage in chlorine water and 1 hour of plasma treatments. E. coli was not detected immediately after sterilization in all sterilization treatments. After 6 hours of plasma treatment, the total bacteria fungus counts were lower than the domestic microbial standard for agricultural product in all sterilization treatments. The total aerobic counts in the end storage day increased compared to before storage, whereas E. coli was not detected in all sterilization treatments. The sterilization effect against bacteria and fungi was the best in chlorine water treatment. Plasma treatment showed sterilization effects, but within a prolonged period of time. In addition, the sterilization effect decreased gradually. These results suggest that chlorine water and plasma treatment were effective in maintaining Latuca indica L. baby Leaf commerciality and controlling microorganisms during postharvest storage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.45-78
• /
• 1974

To provide useful information for developing new high yielding soybean varieties and for improving cultural practices, an investigation was made on variation of dry matter production and on relationship among several agronomic characters of soybean plants grown under different planting times and densities as well as under different fertilizer levels, using Kwang-kyo, Dong puk-tae, and Suke ＃ 51 as determinate types and Shelby, SRF-300 and Harosoy as indeterminate types at the Crop Experiment Station during the period of 1972 and 1973. The results obtained were summarized as follow: 1. The dry weight, CGR and LAI at the initial flowering stage were high in the high plant population irrespective of varieties, planting times, and fertilizer levels. However, those characters of the indeterminate type were lower than those of the determinate types. The same characters of the indererminate type at the terminal leaf stage were either same or higher than those of the determinate types. 2. The dry weight of the determinate type at the initial flowering stage was similar to the indeterminate, type, when planting times were May 21 or June 15. The dry weights of both types of varieties were low when planted on July 10. When fertilizer levels were increased, the CGR, dry weight and LAI at the initial flowering stages were also increased. 3. Even though significant differences of LAI were obtained among the varieties within the same plant type, the indeterminate type was in general lower than that of the determinate type regardless of planting time and densities, or fertilizer levels, while the yield of the indeterminate type was comparable to the yield of the determinate type. 4. The high degree of leaf- and petiole-fall at the greenbean stage was highly associated with early planting and high levels of fertilizers. However, less amount of leaf- or petiole-fall was found when planted on July 10 or under low plant population. 5. The percent of stem weight was high under higher plant population, while the percent of leaf weight was high under lower plant population. When planting time was late, the percent of stem and petiole weight were reduced, while the leaf weight was increased. 6. The percent of pod weight of the determinate type at the terminal leaf stage was about 2% when planted on May 21, about 8% when planted on June 15, and about 9% when planted on July 10. The percent of pod weight of the indeterminate type at the terminal leaf stage were about 6 % when planted on May 21, 14% when planted on June 15 and 21% when planted on July 10. 7. Kwang kyo showed less degree of leaf-fall even when lodged due to high levels of fertilizer applied, while SRF-300 showed great damage due to lodging. 8. High yields were obtained when planted on May 21, but there were little yield differences between yields from May 21 and June 15 plantings. The reduction of yield due to late planting of July 10 was less apparent in the determinate type of varieties, while it was high in the indeterminate type. 9. The optimum plant population per are for high yield was 1, 250 to 2, 500 plants when planted on May 21, 2, 500 plants when planted on June 15, and 3, 333 plants when planted on July 10. 10. High correlation coefficients were obtained between dry matter weight and LAI at the terminal leaf stages, and between the dry matter weight and yield at the greenbean stages. The optimum dry weight for high yield in the determinate type was expected to be 25 kg. per are at the initial flowering stage and 50 kg. per are at the terminal leaf stage. In the indeterminate type the LAI and dry weight at the greenbean stage were 4 to 5 and 80 kg. per are, respectively. 11. Under the high plant population plant height was increased, while the stem diameter and the number of nodes and branches were reduced. Consequently, the percent of mainstem to main stem plus branches were increased, and the length of internode was also elongated. The ratios of stem weight, number of nodes and pods, and yield of main stem were increased when high plant population was associated with the early planting. The percent of main stem to branches for the indeterminate type was higher than that of the determinate type. 12. Under the high plant densities and late planting, the percent of the pod number and yields of main stem were increased, indicating that varieties with no or less branches were better adaptable under such conditions. 13. High degree of simple correlation coefficients was obtained between the LAI at the initial flowering stage and terminal leaf stage, and the total node number, dry matter and dry stem weight of both determinate and indeterminate types. Even though no significant correlation was found between the LAI at the initial flowering stage of the determinate type and the stem length and pod number per are, highly significant correlation coefficients were obtained between such characters in the indeterminate type of varieties. 14. The dry matter was positively correlated with the LAI, CGR, stem length, and pod number, node number and dry stem weight per are, while no significant correlation was found between the dry matter and stem diameter. 15. The correlation coefficients between lodging index and the LAI, dry weight, stem length and dry stem weight were highly significant. Negative correlation was obtained for the indeterminate type between the stem diameter and lodging index. The correlation coefficient between the stem diameter and lodging index was non-significant for the determinate type, while positive correlation was obtained between the yield and lodging index in the determinate type. The lodging index was also positively correlated with average length of internode of main stem. 16. The 100 seed weight appeared to be lowered under the high plant population and no fertilizer condition, and when planted late. Apparent differences of 100 seed weight were found between main stem and branches, being higher for the main stem than for the branches. 17. No variation of protein content was found due to different cultural practices. However, the oil content was apparently reduced when planted late.