• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.68.2-68.2
• /
• 2017

인체접촉시 니켈도금의 알러지 반응을 억제하기 위한 대체 도금기술인 비 시안계 Cu-Sn 합금도금을 개발함에 있어서, 황산구리5수화물과 황산제일주석을 금속염으로 하여 황산 및 계면활성제, 유화제 등을 포함한 각종 유기첨가제를 포함하였고 특히 은백색조의 외관 색상과 안정적인 Cu-Sn 합금전착을 위해 2종의 착화제인 EDTP (Ethylenediaminetetrapropanol, $C_{14}H_{32}N_2O_4$)와 TEA (Triethanolamine)를 첨가한 비 시안계 Cu-Sn 합금 도금액을 도출하였다. Cu-Sn 합금도금 피막 조성의 균일화를 도모하기 위해서는 합금 도금액중의 Cu와 Sn 금속이온 농도를 일정하게 유지하는 것이 필요하다. 그러나 합금 도금액 중 2가 주석이온($Sn^{2+}$)은 수용액 중에서 4가 주석이온($Sn^{4+}$)으로 산화됨으로써 도금액 색상이 백탁이 되고 Stannic Hydroxide($Sn(OH)_4$, $SnO_2{\cdot}2H_2O$)이 생성되어 대량의 침전물이 침강하는 문제점이 발생되는 등시간 경과에 따른 도금액의 경시 변화가 발생되었다. 상기 침전물은 연속여과에 의해 제거 가능하나 합금 도금액 중 $Sn^{2+}$ 농도가 지속적으로 감소하게 된다. 이는 합금 도금액 중 금속이온 비율이 변동함으로써 합금도금 피막의 조성비를 일정하게 유지하는 것이 곤란해진다. 이에 $Sn^{4+}$ 침전물 생성을 방지하기 위한 산화방지제를 개발하고 또한 산화방지제의 첨가에 따른 도금 피막 외관에 미치는 영향을 평가하여 외관 개선을 위한 광택제를 개발하고자 한다. 본 연구의 결과를 토대로 니켈도금과 동등 이상의 기능 특성을 갖는 비 시안계 Cu-Sn 합금도금액을 개발하여 실용화하는 것을 목적으로 하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.25-31
• /
• 2021

In this research, in order to effectively utilize the petroleum residue pitch, it was used as an adsorbent for removal of cesium ion. In this experiment, acid modification (hydrochloric acid, sulfuric acid) treatment was performed on the adsorbent to improve the ability to remove low-concentration cesium ions dissolved in water. As a result, when the reaction was performed with 9 M sulfuric acid at 25 ℃ and for 240 min, the removal efficiencies of 1.0 and 2.5 mg/L cesium ions were 66 and 51%, respectively. In addition, as the adsorption time increased in the batch experiment, the removal capacity of 1.0 and 2.5 mg/L cesium ions was improved, and when the adsorption reached for 32 hr, the removal efficiencies were 72 and 68%, respectively. Also, in order to increase the ability to remove the remaining cesium ions, an experiment was performed by temperature change (25, 37, 49 ℃), and 1.0 and 2.5 mg/L cesium ions contained in water under the operating conditions of 49 ℃ and 32 hr showed removal efficiencies of 90 and 81%, respectively. Consequently, these experimental results were intended to be used as an adsorption technology that can economically treat low-concentration cesium ions contained in water.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.147-155
• /
• 2004

Anion adsorption properties of organobentonites modified by two cationic polymers, hexadecyltrimmethylammonium (HDTMA) and cetylpyridinum (CP), were investigated. The organobentonites showed the significant expansion of basal spacing to 42.0 $\AA$ at room temperature. The adsorption experiments were conducted for the 0.2 g of organobentonites with 40 mL solutions of various concentrations of anions such as nitrate, sulfate and phosphate. As a result, the organobentonites showed excellent adsorption capacities for those anions whereas untreated bentonite showed very low adsorption capacity. Adsorption rate of HDTMA-bentonite was about 90% for 100 mg/L solutions of nitrate and phosphate, and that of CP-bentonite was 97% for 100 mg/L solution of nitrate. Adsorption behaviors were slightly different for the different organobentonites and anions. Both organobentonites showed relatively higher adsorption rate for nitrate and phosphate than sulfate. Therefore, these organobentonites showing high anion adsorption capacities can be used far the removal of deleterious anions in the treatment of environmental pollution.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2019

In this study, amine derivatives and ion exchange resins were selected to actively control penetration ions ($SO{_4}^{2-}$, $Cl^-$) as the element technology of repair materials for concrete structures in drainage environments. Ions ($SO{_4}^{2-}$, $Cl^-$) adsorption performance and corrosion resistance of calcium hydroxide solution with amine derivative and ion exchange resin were confirmed by ion chromatography and potentiostat analysis. As a result of the experiment, it was confirmed that the amine derivative is excellent in the adsorption of chlorine ion and the ion exchange resin is excellent in the adsorption of sulfate ion. It has been confirmed that corrosion resistance can be increased by proper combination of two materials in the calcium hydroxide solution containing sulfate ion and chloride ion simulating sewage environment.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.46-52
• /
• 1992

$TiO_2/SO_4{^{2-}}$ was prepared by precipitation from the mixed solution of titanium chloride and hydrochloric acid followed by modification with sulfuric acid. The characterization of prepared catalyst was performed by using IR, XPS, XRD and DT-TGA. Infrared spectra of $TiO_2/SO_4{^{2-}}$ showed bidentate sulfate ion coordinated to the surface of $TiO_2$. The acid strength of modified catalyst was at least $H_0{\leq}-14.52$, showing the superacidic properties which are attributed to the double bond nature of S=O of the complex formed by the interaction of $TiO_2$ with sulfate ion. For $TiO_2/SO_4{^{2-}}$, the specific surface area increased and the transition from the amorphous to anatase phase occurred at a higher temperature, as compared with pure $TiO_2$.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.183-189
• /
• 2010

It is of importance to separate Ni(II) and Co(II) from Mg(II) in solution which was leached from nickel laterite ore. In order to investigate the possibility of separating Ni(II) and Co(II) from Mg(II), adsorption behavior of the three metals from individual and mixed sulfate solutions was investigated by using Diphonix resin. The concentration of each metal in solution was fixed at 100 ppm and the pH of the sulfuric acid solution was changed from 5 to 7. At ambient temperature, the adsorption behavior of the three metal ions followed Langmuir adsorption isotherm. The loading capacity of Diphonix resin for the three metal ions was obtained from the Langmuir isotherm. Since adsorption behavior of the three metal ions from the mixed solution was similar to each other, it was found to be difficult to separate Ni(II) and Co(II) from Mg(II) by using Diphonix resin.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.98-103
• /
• 2020

In this study, the depression behavior of zinc sulfate on the sphalerite with the addition of potassium butyl xanthate was investigated to clear the relationship between zinc sulfate and xanthate in depression of sphalerite. As a result of the experiment, it was confirmed that the depress effect of zinc sulfate on the sphalerite declined with the increase of its addition amount. From the results of SEM-EDS and FT-IR analysis, it was found out that the amorphous precipitate of metal xanthate (Zn-BX) was formed in sphalerite concentrate, when the solubility product of [Zn+]·[BX] in the pulp solution exceeded 3.71×10-11, which is the solubility of Zn-butyl xanthate. It is considered that the Zn-butyl xanthate had a negative effect on the depression of sphalerite.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.911-914
• /
• 2008

It has been recognized for a long time that sulfate ions in seawater and soils can cause severe damage to concrete structures. There have been numerous field and lab. studies on the distress caused to concrete structures generated by sulfate attack. All these investigations emphasize that in order to understand the deterioration of concrete due to sulfate attack. Until now, however, it has been difficult to define the precise nature of the mechanism of sulfate attack because of its complex behavior. Thus, this work dealt with the deterioration mechanism caused by sulfate attack and the evaluation criteria.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.7-12
• /
• 2017

Recovery of sulfuric acid is very important after biomass converted to sugar by acid hydrolysis. In this work, the separation of sulfuric acid from sulfuric acid/glucose solution was studied by electrodiaysis. Three chamber method, which requires both anion membrane and cation membrane, is the most commonly used in the electrodialysis process, but two chamber method using only an anion membrane was the focus of this study. Sulfuric acid was perfectly separated from a mixture of 10~30 wt% glucose and 1~3 M sulfuric acid by electrodialysis using two chamber method. The separation rate of sulfuric acid lineary increased with higher current density when the affect of diffusion and convection of the membrane was small. Without electric energy, 45% of sulfuric acid was separated by diffusion and convection only.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.240-247
• /
• 2010

The purposes of this study were to analyze the contents of sulfuric acid in Science textbooks and Chemistry II textbooks, and to survey 10 pre-service teachers' perceptions who majored chemistry education related to sulfuric acid. As results, most of the Science textbooks represented that sulfuric acid was divided into two $H^+$ and one $SO_4{^{2-}}$. But this mistake might be corrected because sulfuric acid was divided into one $H^+$and one $HSO_4{^-}$. Most of Chemistry II textbooks represented ionization steps of sulfuric acid, but same mistake was represented in some of Chemistry II textbooks. $HSO_4{^-}$ is a weak acid, but some Chemistry II textbooks represented $HSO_4{^-}$ as a strong acid. As results of the survey related to pre-service teachers' perceptions, some pre-service teachers didn't know the situation of particles in sulfuric acid solution, and they were affected on by the learning of high school classrooms.