• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.583-588
• /
• 2003

Sulfated chitosan and sulfated sodium alginate were synthesized by sulfating reaction of low molecular chitosan and low molecular sodium alginate with SO$_3$-pyridine complex. When the weight ratio of SO$_3$-pyridine complex to polysaccharide was 1:5, the degrees of sulfation were the highest at 2.75 and 2.53 respectively. The anticoagulation effect was the highest when the molecular weight was 8.0${\times}$10$^3$ Da, and the anticoagulation activity was the highest at 91% of that of heparin when sulfated chitosan and sulfated sodium alginate were mixed at a weight ratio of 1:1. The anticoagulation activity was highest at 84% of that of heparin in the active plastin trombo test (aPTT) when sulfated chitosan and sulfated sodium alginate were mixed at a weight ratio of 1:1.

• The Korean Journal of Zoology
• /
• v.33 no.4
• /
• pp.468-475
• /
• 1990

An In vitro protein sulfation in the soluble fraction of rat brain was charaderized further by an improved method of alkaline hydrolysis and thin layer ceflulose electrophoresis TLE) The protein sulfation was carried out in a reaction system containing [35 S] 3'-phosphoadenosine-5'-phosphosulfate (PAPS), Tris-maleate buffer (pH 8), MgCI$_2$, and soluble proteins from rat brain. The sulfated proteins were precipitated by acetone and alkaline hydrolysis was performed to obtain sulfated amino acids. The hydrolysate was separated further by TLE and the separated residues were identified by fluorography. The Iluorography of one-dimensional The showed at least nine sulfated residues including tryosine-O-sulfate. The other spots were not identified yet positively. General properties of protein sulfotransferases (PST) using this method were re-examined such as effects of concentrations of PAPS, pH, incubation temperature and $Mg^2$+. These results suggest a possible occurrence of several PST corresponding to each sulfated residue in rat brain and that the sulfation can occur not only in tyrosine but also in other residues as well.

• Proceedings of the KSEEG Conference
• /
• 2000.04a
• /
• pp.34-35
• /
• 2000

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.289-298
• /
• 1996

Eight kinds of poly(oxyethylene, oxyisopropylene) dodecyl ethers were synthesized by adding ethylene oxide and isopropylene oxide with each 5 and 10 moles alternatively on dodecanol. The addition of EO and PO for eight kinds of sodium poly(oxyethylene, oxyisopropylene) dodecyl ether sulfates was identified with HPLC, $^1H$ NMR, hydroxy value, and IR spectrum. In order to verify the sulfation the number of EO and PO molecules was obtained by spectra and Epton method. The yields of products sulfated by chlorosulfonic acid were 90~96%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.37-37
• /
• 2014

유증기 처리 설비에서 발생하는 황화합물의 황산화 현상에 따른 부식손상은 설비의 안전운영 및 유지보수 공정에 영향을 미치는 주요 원인이며, 이에 대한 대책이 필요한 실정이다. 본 연구에서는 실제 유증기 가스 및 설비공정 상에서 발생되는 침출수를 채취하여 각각의 성상을 분석하고 부식을 일으킬 수 있는 황산화 현상에 대한 연구를 수행하였다. 또한, 발생 유증기의 액화에 따른 침출수의 배관부식 영향성을 확인하기 위하여 배관용 강관재료에 대한 무게감량시험 및 전기화학시험을 통해 침출수 pH 조건에 따른 부식경향성을 평가함으로써 유증기 처리설비의 부식방지 대안을 제시하고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.774-781
• /
• 2011

Nitric acid and hydrofluoric acid are used for acid pickling in zirconium alloy tubing manufacturing process. Nitrate and fluoride in the wastewater were treated by chemical coagulation and SOD (Sulfur Oxidation Denitrification) process. This study is investigated the effect of fluoride concentration and the optimal condition for SOD process. The limited fluoride concentration for SOD process was below 20 mg F-/L. The adjusted pH and alkalinity by NaOH and $NaHCO_3$ was shown to be more effective for removal of nitrate compared with using NaOH. Furthermore, the microbial activator mixed trace elements and ingredient for alkalinity did not only supplement with alkalinity but also enhance the growth and proliferation for sulfur-oxidizing bacteria. As a result, the inorganic industrial wastewater was successfully treated by the microbial activator in SOD process without continuous addition of seed sludge. Finally, SOD process was shown to remove nitrate in industrial wastewater and to contribute the microbial activator for activation of sulfur-oxidizing bacteria.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.2
• /
• pp.175-182
• /
• 1995

Styrene-Maleic anhydride copolymer (SMA) was prepared by the radical copolmerization of styrene and maleic anhydride using ${\alpha}-{\alpha}'$ azobis(isobutyronitrile) as an initiatrr. SMA was further reacted with m-amino phenol to obtain aminophenol-substituted SMR (mSMA). Sulfonated SMA and mSMA were also prepared by the reaction of copolymers with sulfuric acid The copolyniers were characterized by infrared spectroscopy. It was found from the results of elemental analysis that the substitution degree of aminophenol in the mSMR is 44% and the degree is lowered to 35% after sulfonation. The percentage of copolymers adsorbed on the surface of cement particles was increased with a decrease of added copolymers. While, the arnourit of sulfonated SMA absorbed on the surface of cement particles was larger than that of the sulfonated mSMA The copolymers synthesized in this study are probably expected as a high range water reducer for coiicxte.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.372-384
• /
• 1991

The sulfation of the domestic titaniferous magnetite ore with ammonium sulfate was investigated to find a cyclic process for the production of synthetic rutile and high purity iron oxide and to test the feasibility of ammonium sulfate being an alternative sulfation agent. The proper sulfation conditions were determined to be a temperature of $425^{\circ}C$, 2.5 hours of reaction time, the weight ratio of ammonium sulfate to titaniferous magnetite : 11, and particle size or titaniferous magnetite : -250 mesh. 90.4 % of $TiO_2$ and 85.3 % of iron were extracted from the titaniferous magnetite sulfated under these conditions by the water leaching. From the leachate $TiO_2$ of 93.8 % purity as a mixture of rutile and anatase and ${\alpha}-Fe_2O_3$ of 97.6 % purity were obtained.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.S2
• /
• pp.21-42
• /
• 1999

뽕잎의 지금까지 박ㄹ혀진 생리활성은 중금속 흡착과 해독효과, 황산화 효과, 혈중지질 억제효과 및 혈당강하 효과를 들 수 있는데, 요약하면 다음과 같다. 1) 뽕잎이 Cd과 Pb같은 중금속에 대한 흡착 및 해독작용에 미치는 영향을 조사해 본 결과, 납중독으로 인하여 감소된 Hb와 Haematocritcl가 뽕잎 투여로 증가되었고 특히 gpa합성에 관여하는 DALAD효소 활성을 증가시켰다. 또한 뇨로의 Pb의 배설 효과가 뽕잎 투여로 증진되었으며 각 조직으로의 Pb축적을 감소시켰다. Cdwndehr으로 중독시킨 흰쥐에서도 감소된 Hd와 Haematocritcl가 뽕잎투여로 증가되었고, 특히 간조직 중의 Cd축적을 61%로 감소시켜 유의성있게 감소시켰다. 또한 뽕잎투여로 인하여 변으로의 Cd의 배설효과는 38%였고 이는 녹차투여 효솨보다는 낮은 수준이었다. 2)뽕잎의 향산화 효과는 녹차와 거의 비슷하였고 특히 혐기 처리함으로써 그 활성이 증가하였다. 또한 뽕잎중의 황산화 활성 성분은 10여종 flavonoidfb 이었고 그 중 quercetin이 가장 높은 황산화 활성을 나타냈다. 특히 dlavonidfb 화합물 중 kaempferol계열의 화합뭉이 황산화 효과가 높음을 알수 있었다. 3) 뽕잎의 고지혈 억제작용에 미치는 영향을 알아본 결과 뽕잎은 혈중 총 콜레스테롤이 차지하는 비율을 보였고 특히 혈중 중성지질 함량을 감소시킴으로써 정상의 80%수준까지 회복시켰다. 또한 콜레스테롤 생합성에 관여하는 효소활성을 뽕잎의 메탄올 추출물 중 물분획뭉이 59.9%수준으로 억제시켰고 지방분해효소 활성은 유의적인 수준은 아니었지만 16% 증가시켰다. 4) 뽕잎의 혈당강하 효과는 뽕잎을 질소가스를 이용하여 혐기처리하는 경우 유의적으로 그 효과가 증강되었다. 또한 뽕잎은 대조약물인 acarbose의 10배 용량에서 대조약물보다 23% 이상의 혈당강하 효과를 나타냈다. 이들의 혈당강하 효과는 같은 농도에서 인슐린 함량을 27%회복시켰으며 특히 surcrose와 maltose와 같은 이당류를 부하시켰을 때 혈당 강하 효과는 유의적이었다. 이는 뽕잎의 혈당강화 효과는 인슐린생합성 증가에 의한 것보다는 glucosidase의 활성을 억제시키는 기전이 더 많이 관여하는 것으로 판단할수 있었다. 또한 뽕잎 중의 혈당강하 성분으로 알려진 1-deoxynojirimycin 함량은 혐기처리로 인하여 그 함량이 5%정도 증가됨을 확인할 수 있었다. 이러한 뽕잎의 생리활성 결과에 기초할 때, 뽕잎은 고지혈증을 포함한 성인병 질환의 예방과 회복에 관련되는 조절기능을 생체에 충분히 발휘할수 있는 기능성 식품의 중요한 자원으로 이용될 수 있으리라 판단된다.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.57-63
• /
• 2016

This study were carried out sulfation roasting and selective leaching test for the effective recovery of copper component in concentrate obtained by froth floatation of Autrallian low grade copper ore. The optimum conditions of sulfation roasting were temp. $450^{\circ}C$, $Na_2SO_4$ 2 mole ratio and time 1.5 h, and then selective leaching were room temperature and $H_2O$ or 1M $H_2SO_4$ solutions. Leaching efficiency of optimum sulfation product were 90 wt.% of copper, 20 wt.% of iron and 15wt.% of nickel elements. In this results, it was possible to selective decomposition leaching of the copper component under optimum conditions in this research.