• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.267-275
• /
• 1988

Fine powders of amorphous $Al_2O_3,\;SiO_2,\;Al_2O_3-SiO_2$ system were prepared by hydrolysis of solutions containing alkoxides, aluminium tri-isopropoxide and silicon tetra-ethoxide. High purity ultrafine ${\beta}-sialon$ powders were prepared by the carbothermal reduction-nitridation of amorphous $Al_2O_3-SiO_2$ powders mixed with carbon black as a reducing agent. In the hydrolysis step the effect of the factors such as pH, reaction temperature and amount of water on the conversion rate of alkoxides to oxides was investigated. In the carbothermal reduction-nitridation the reaction path was assumed by the analysis of intermediates formed in the process of ${\beta}-sialon$ synthesis and the reaction kinetics of ${\beta}-sialon$ formation was considered.

• Defense and Technology
• /
• no.5 s.279
• /
• pp.26-37
• /
• 2002

타이타늄은 융점이 높으며 공업용 합금 중 비강도가 가장 크고, 인체를 포함한 어떠한 산화성 및 환원성 분위기에서도 스테인리스강보다도 내식성이 탁월할 뿐 아니라, 극적온 특성 등 내환경성이 우수하다. 또한 질량효율이 크고, 낮은 열 팽창계수, 비자성 특성에 다양한 제작성을 겸비하였을 뿐 아니라, 정비유지를 감안한 수명 주기 비용이 우수한 타이타늄 재료는 방탄재, 전투차량, 야포, 소총 등 육상장비, 구축함, 항공모함, 잠수함 등 수상 및 수중장비, 가변익기 및 고정익기 등 군용길ㄹ 포함하는 항공 우주장비 등에 없어서는 안 되는 재료이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.133-139
• /
• 1996

PWR 원전에서의 원자로 정지시 일차측 화학제어 특성을 고찰하고 제어조건을 검토하여 국내 PWR 일차측 CRUD 제거를 위한 원자로 정지시 화학처리 조건을 도출하였다. 주요 정지시 화학처리 조건으로, 조기붕소화, 산성-환원 분위기 조성 (수소농도 $\geq$ 15cc/kg- $H_2O$), 과산화수소에 의한 산소화 (주입온도 82$^{\circ}C$, 주입농도 2~8 ppm) 및 정화 탈염기 유량을 최대로 하는 운전을 제시하였다.

• Defense and Technology
• /
• no.2 s.288
• /
• pp.60-67
• /
• 2003

높은 비강도와 산화성 및 환원성 분위기에서의 탁월한 내식성 등으로 무기체계에 적합한 소재인 타이타늄은 1790년 영국의 목사 Gregor가 원소를 발견한지 156년이 지난 1946년에서야 비로소 첫방탄시험이 미국의 실험실에서 이루어지게 되었다. 그러나 타이타늄의 높은 화학반응성과 높은 융점($1670^{\circ}C$)때문에 상업적으로 광범위하게 사용되는 것은 더디게 진행되어 왔다. 최근 선진국에서는 타이타늄 재료의 지상무기체계 적용이 광범위하게 검토되어 진행되고 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.120-120
• /
• 2000

• Journal of the Korean Ceramic Society
• /
• v.37 no.7
• /
• pp.726-729
• /
• 2000

The entitled report revealed that ZnO phosphor samples treated at different temperatures under a given reduction atmosphere show the radiation brightness increase with increase of temperature up to about 900$^{\circ}C$ but become decreasing beyond the temperature. The brightness deterioration with curing temperature at higher temperatures was explained by the decrease of excess zinc ions resulted from their evaporation. The comments will open possibility for different discussions on the experimental result by introducing numerical relationships between the concentration of the native defects and the curing condition.

• Defense and Technology
• /
• no.3 s.289
• /
• pp.51-57
• /
• 2003

높은 비강도와 산화성 및 환원성 분위기에서의 탁월한 내식성 등으로 무기체계에 적합한 소재인 타이타늄은 1790년 영국의 목사 Gregor가 원소를 발견한지 156년이 지난 1946년에서야 비로소 첫방탄시험이 미국의 실험실에서 이루어지게 되었다. 그러나 타이타늄의 높은 화학반응성과 높은 융점($1670^{\circ}C$)때문에 상업적으로 광범위하게 사용되는 것은 더디게 진행되어 왔다. 최근 선진국에서는 타이타늄 재료의 지상무기체계 적용이 광범위하게 검토되어 진행되고 있다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.372-378
• /
• 2019

Traditional ceramic glazes formulated with copper oxide (CuO) exhibited antibacterial properties on Staphylococcus aureus (Gram Positive) and Escherichia coli (Gram Negative). All the ceramic glazes containing CuO showed antibacterial behavior when fired in reducing atmosphere. However, some of copper glazes presented antibacterial behavior and had no antibacterial properties at all when sintered in an oxidizing atmosphere. To elucidate the antibacterial mechanism, ceramic glazes were studied for phase and microstructure analysis, dissolution behavior and surface zeta potential. Metallic copper was precipitated in the glaze layer when sintered in reducing atmosphere. Less than 0.05 ppm of Cu ion was dissolved from glazes. Ca ion was most dissolved among all the samples. Glaze surface was highly negatively charged when CuO was added over 3 wt.% regardless of the sintering atmosphere. The antibacterial behavior of ceramic glazes seemed to be directly related to the dissolution behavior of cations, but the antibacterial behavior of oxidized specimens was not explained by the dissolution behavior. Surface potential of ceramic glazes appeared to play an auxiliary role in antibacterial properties.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.276-280
• /
• 2017

In this study, we investigated the effect of sterilization and the neutralization of treated ballast water using seawater electrolysis. The electrolysis apparatus has a cation-selective membrane for passing the cation and a titanium electrode in each cell. We examined the sterilization effect after an incubation period of 24 hr. The oxidation reaction during electrolysis caused, the solution to become strongly acidic due to the generation of a hydroxyl group, and the oxidation reduction potentials(ORP) was increased to 800 - 1200mV. After the reduction reaction, the solution became alkaline(pH 9 - 12), and ORP was decreased to - 900 - - 750 mV. It might be possible to control the pH of ballast water through electrolysis. In addition, we demonstrated the effects of sterilization of ballast water containing generated hypochlorous acid using electrolysis under high ORP condition.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.29-33
• /
• 2003

Material and electrical properties of copper-based ohmic contacts on n-type 4H-SiC were investigated for the effects of the post-annealing and the metal covering conditions. The ohmic contacts were prepared by sequential sputtering of Cu and Si layers on SiC substrate. The post-annealing treatment was performed using RTP (rapid thermal process) in vacuum and reduction ambient. The specific contact resistivity ($p_{c}$), sheet resistance ($R_{s}$), contact resistance ($R_{c}$), transfer length ($L_{T}$), were calculated from resistance (RT) versus contact spacing (d) measurements obtained from TLM (transmission line method) structure. The best result of the specific contact resistivity was obtained for the sample annealed in the reduction ambient as $p_{c}= 1.0 \times 10^{-6}\Omega \textrm{cm}^2$. The material properties of the copper contacts were also examined by using XRD. The results showed that copper silicide was formed on SiC as a result of intermixing Cu and Si layer.