• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.935-939
• /
• 2018

3D Printing technology is developing in various prototypes for medical treatment, food, fashion as well as machinery and equipment parts production. 3D printing technology is also able to fully be utilized to other industries in terms of developing its technology which has been reported in many field of areas. 3D printing technology is expected to be used in various applications related to $4^{th}$ industrial revolution such as finished products and parts even it is still carried out in the prototype model. In this study, we have investigated and developed conductive resin for 3d printing application based on reduced graphene oxide(rGO)/Polypyrrole(Ppy) composite and polycaprolactone(PCL) as a biodegradable polymer. The electrical properties and surface morphology of the conductive PCL resin based on therGO/Ppy composite were analyzed by 4point-probe and scanning electron microscope(SEM). The conductive PCL resin based on rGO/Ppy composite is expected to be applicable not only 3D printing, but also electronic materials in other industrial fields.

• Composites Research
• /
• v.36 no.3
• /
• pp.167-172
• /
• 2023

The manufacturing technology of composite material is applicable with filler characteristics maintaining low cost, flexibility, and easy process to develope the various functional composite materials. To realize functional composites, various researches on the high performance of composite materials using graphene as a filler is being actively conducted. In this study, physical and chemical properties were investigated using graphene to improve high functional properties. Graphene oxide (GO) was prepared using graphane nanoplatelet (GNP), and reduced graphene oxide (R-GO) was formed by reducing GO. The physical properties of GO and R-GO were analyzed, and the reliability of the manufactured method was reviewed by comparing that of GNP results. As a result of analysis by Raman spectroscopy, in the case of R-GO, it was confirmed that the intensity of D-peak and G-peak decreased compared to GO, and an increase of 0.08 was observed through the ratio of ID/IG. For the FTIR results, GO and RGO has a repeating C-C and C=C connection structure unlike GNP. GO and R-GO show clear peaks for C-O bond, C=C bond, C=O bond, and O-H bonding. As a result of X-ray diffraction analysis, GNP showed a wide diffraction peak at 25.86° of (002) plane characteristics, whereas GO and R-GO showed peaks corresponding to (001) and (100) planes. It was also found that the interlayer distance of GO increased by about 2.6 times compared to GNP.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.468-474
• /
• 2015

Electrically conductive polymer nanocomposites were prepared by the inclusion of graphene-based nanofillers. Graphene oxide (GO) and reduced graphene oxide wrapped by poly(styrene sulfonate) (PSS-RGO) were used as nanofillers to make good dispersion with the aqueous dispersion of polystyrene (PS) particles. GO sheets were synthesized by the modified Hummers' method from graphite, and PSS-RGO sheets were prepared by the reduction of GO-dispersed PSS solution with hydrazine monohydrate. Morphology and properties of PS/GO and PS/PSS-RGO nanocomposites via latex technology were investigated. Both nanofillers showed well dispersed morphology in PS matrix. Rheological and electrical percolation thresholds were 0.28 and 0.51 wt% for GO, and 0.50 and 1.01 wt% for PSS-RGO respectively. It is speculated that PS/GO nanocomposites showed better conductivity than PS/PSS-RGO counterparts due to the partial recovery of GO by thermal reduction during molding.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.99-103
• /
• 2015

We conducted reduction reactions of graphene oxide (GO) using three selected reductants. The conductivity and solubility of three kinds of the reduced graphene oxides (RGOs) were examined based on the degree of reduction. When the ethylene glycol (EG) was used as a reductant, the reduction reaction did not sufficiently progress and as a result the conductivity of RGOs was observed to be relatively low. For RGOs made by hydrazine (HZ) and thiourea dioxide (TU), we observed no significant differences in the degree of the reduction, conductivity and dispersity in water. However, RGO prepared by TU showed an exceptionally good solubility in N-methylpyrrolidone, and the solution was stable for more than 4 months.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.265-271
• /
• 2011

Graphene oxide (GO) was prepared by the Hummers and Offeman method from graphite. Reduced graphene oxide (EGO) and functionalized graphenes were synthesized from GO by using hydrazine hydrate and amine-functionalized alkyl groups, respectively. The structures of the GO, EGO, and functionalized graphenes were identified by FTIR and $^{13}C$ NMR. In addition, we examined the thermal stability, morphology and dispersibility of the materials in various organic solvents. AFM disclosed that GO and RGO consisted of one- or two-layer graphene regions throughout the film. However, the functionalized graphene films showed average thicknesses of 2.26~3.30 nm, The thermal stability of the functionalized graphenes was poorer than that of the EGO. The functionalized graphenes were well dispersed in toluene or chloroform, as evidenced by the lack of the characteristic graphite reflection in the solutions.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.23-28
• /
• 2019

We report a supercapacitor cable, which consists of three-dimensional (3D) porous graphene coated onto the surface of carbon thread. The 3D porous framework of graphene was constructed by microwave-activated process using a graphene oxide-coated carbon thread. The use of microwave irradiation enabled to convert graphene oxide into reduced graphene oxide without any reducing agents and activate graphene sheets into exfoliated and porous graphene sheets. Combining two wire electrodes with a polymer gel electrolyte successfully completed supercapacitor device in a form of cable construction. The supercapacitor cables were highly flexible, and thus can be transformed into various shapes of devices and be integrated into textile items. A high area-capacitance of 38.1 mF/cm was obtained at a scan rate of 10 mV/s. This capacitance was retained 88% of its original value at 500 mV/s. The cycle life was also demonstrated by repeating a charge/discharge process during 10,000 cycles even under bent states, showing a high capacitance retention of 96.5%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.613-613
• /
• 2013

그래핀은 저차원계 구조에서 기인하는 뛰어난 전기적, 물리적, 기계적 성질을 지니고 있어 실리콘 기반 기술을 대체할 전계 효과 트랜지스터 이외에도 투명전극, 초고용량 커패시터, 전계방출 디스플레이 등 다양한 응용분야에 적용 가능하다. 최근에는 이러한 응용 연구분야에서 그래핀과 탄소나노튜브 각각의 단점을 최소화하고 장점을 극대화하기 위한 그래핀-탄소나노튜브 혼성 나노구조에 대한 연구들이 진행되고 있는 추세이다. 이전 연구들에서 환원된 그래핀 산화물(Reduced Graphene Oxide, RGO)을 이용한 그래핀-탄소나노튜브 혼성 나노구조가 제작되었는데, 이는 RGO의 제작과정에서 복잡한 공정과 긴 합성과정이 요구될 뿐 아니라, 복합 물질에서 탄소나노튜브의 밀도 제어가 어렵다는 단점을 지닌다. 또한 현재까지 제작된 그래핀-탄소나노튜브 혼성 나노구조의 경우, 열 화학기상증착법으로 합성된 다층(few-layers)의 그래핀과 탄소나노튜브 혼성 나노구조를 제작하였다 [1-6]. 본 연구에서는 우수한 전기적 특성을 가진 단층(monolayer)의 그래핀을 열 화학기상증착법으로 합성한 후, 그래핀 위에 단일벽 탄소나노튜브를 성장시킴으로써 그래핀-탄소나노튜브 혼성 나노구조를 제작하였다. 합성된 그래핀-탄소나노튜브의 구조적 특징은 주사 전자 현미경과 라만 분광기 측정을 통해 확인하였고, 촉매의 표면 형상 및 화학적 상태는 원자힘 현미경과 X선 광전자 분광법을 통해 확인하였다. 또한 그래핀 기반의 전계 효과 트랜지스터의 경우, 상온에서 그래핀은 우수한 전하 이동도를 가지며 웨이퍼 스케일에서 제작하기 쉬우나 밴드 갭이 없으므로 높은 Ion/Ioff를 가지는 그래핀 기반의 트랜지스터를 만드는 것이 과제이다. 반면 탄소나노튜브는 큰 에너지 갭을 가지고 있으므로 높은 Ion/Ioff를 구현하는 소자 제작이 가능하다. 그리하여 제작된 그래핀-탄소나노튜브 혼성 나노구조의 소자 제작을 통해 전기적 특성을 조사하였다.

• Composites Research
• /
• v.27 no.5
• /
• pp.183-189
• /
• 2014

Experimental considerations have been performed to obtain the clear optical microscopic images of graphene oxide which are useful to probe its quality and morphological information such as a shape, a size, and a thickness. In this study, we investigated the contrast enhancement of the optical images of graphene oxide after hydrazine vapor reduction on a Si substrate coated with a 300 nm-thick $SiO_2$ dielectric layer. Also, a green-filtered light source gave higher contrast images comparing to optical images under standard white light. Furthermore, it was found that a image channel separation technique can be an alternative to simply identify the morphological information of graphene oxide, where red, green, and blue color values are separated at each pixels of the optical image. The approaches performed in this study can be helpful to set up a simple and easy protocol for the morphological identification of graphene oxide using a conventional optical microscope instead of a scanning electron microscopy or an atomic force microscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.648-648
• /
• 2013

물리적, 열적, 광학적, 그리고 전기적으로 우수한 특성을 가져 학계의 관심을 받는, 2차원 탄소 물질인 그래핀을 준비하는 방법에는 여러가지가 있다. 초창기 그래핀 연구방법에 사용됐던 흑연 플레이크와 스카치테이프를 이용한 기계적 박리법, 흑연의산화와 환원을이용한 화학적 합성법, 구리나 니켈과 같은 전이금속을 촉매로 이용한 화학기상증착을 이용한 합성법 등이 있고 각각은 그 방법에 따른 장단점이 있다. 본 포스터에서는 이 중 물리적 박리법과 화학기 상증착 성장법을 이용해 얻은 그래핀의 물리적, 전기적 특성을 비교분석하였다.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.513-517
• /
• 2013

A novel conductive composite thin film was prepared for the first time by hybridization between polybenzoxazine (PBZ) having high heat resistance property and conductive graphene. Mechanically robust conductive graphene/PBZ composite thin films could effectively be prepared by a simple thermal treatment, which simultaneously induces reduction of graphene oxide (GO) and crosslinking reaction of benzoxazine monomer. Graphene sheets seem to be uniformly dispersed up to 3 wt% graphene content in the composite thin film as shown in the results of chemical/crystal structural and morphological analyses. This efficient route for making graphene/PBZ composite thin film would provide simultaneous improvement of mechanical property as well as electrical conductivity.