• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.72-86
• /
• 2018

Schedule-based public transit routing algorithm computes a single route that calculated minimum travel time using the departure and arrival times for each stop according to vehicle operation plan. However, additional factors such as transfer resistance and alternative route choice are not reflected in the path finding process. Therefore, this paper proposes a improved RAPTOR that reflected transfer resistance and multi-path searching. Transfer resistance is applied at the time of transfer and different values can be set according to type of transit mode. In this study, we analyzed the algorithm's before and after results compared with actual route of passengers. It is confirmed that the proposed algorithm reflects the various route selection criteria of passengers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.1-12
• /
• 2017

The Seoul metropolitan transportation card's high value lies in its recording of total population movements of the public transit system. In case of recorded information on transit by bus, even though route information utilized by each passenger is accurate, the lack of passenger transfer information of the urban railway makes it difficult to estimate correct routes taken by each passenger. Therefore, pinpointing passenger path selection patterns arising in the metropolitan railway network and using this as part of a path movement estimation model is essential. This research seeks to determine that features of passenger movement routes in the urban railway system is comprised of M-similar routes with increasing number of transfer reflected as additional costs. In order to construct the path finding conditions, an M-similar route searching method is proposed, embedded with non additive path cost which appears through inclusion of the stepwise transportation parameter. As well, sensitivity of the M-similar route method based on transportation card records is evaluated and a stochastic trip assignment model using M-similar path finding is constructed. From these, link trip and transfer trip results between lines of the Seoul metropolitan railway are presented.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.35-42
• /
• 2009

One of the problems we face up at the time of planning or improving a transportation transfer facility is which modes and how close we have to put together. The goal here is to keep the connecting transportation mode as close as possible to the prime transit mode, so people travel a minimum transfer path, a distance from one mode to another. Too much a physical separation between modes will limit, even with an intensive improvement of the component links, the level of service of a transfer path as a whole. This study defined a transfer path as the whole stretch of the distance from an arrival point of one mode to the departure point of the connecting mode. The transfer path was divided into three typical segments as side walk, stairways, and indoor corridors. Preference surveys were made for each of these segments, resulting in relative resistance. The sum of individual segments weighted with the relative resistance will make a transfer resistance of the path, which in turn constitutes a transfer utility function together with the overall satisfaction score obtained by the interview survey. The transfer utility function has been utilized to evaluate the transfer distance between modes.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.19-30
• /
• 2000

The purpose of the Paper is to estimate values of transfer related variables on route choices of subway users in Seoul. Four attributes were estimated affecting route choices, i.e. in-vehicle time, transfer time, number of transfers and existence of escalators. Stated preference and revealed preference techniques were used to estimate these values. The values of transfer related variables can be shown by in-vehicle time equivalents. One minute of transfer is 1.5∼2 times one minute of in vehicle times one time of transfer is 10∼15 times, and the existence of escalator is 2∼8 times. Women generally show stronger impedance than men and the elder does than the younger. Working, commuting and educational trips show stronger impedance than others too.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.67-83
• /
• 2018

This research is motivated by the question, "Where, when, and through what mode does an individual passenger moving within a subway station use to travel from starting to final destinations ?" To answer this, the stations passed by the individual passenger, the path taken, and modes used need to be known beforehand. In the metropolitan integrated public transportation fare system, Automated Fare Collection System(AFC) can be a source of information on transit modes, stations, and paths of individual passengers. AFC calculates a fare for the passenger based on travel data such as boarding and alighting stations, time, and mode used. In this research, an Selected Station Analysis(SSA) method, in which AFC data is used to observe passenger movement in the metropolitan public transportation subway station from the perspective of subway transfer stations, is proposed. SSA subdivides individual passenger movement in transfer stations and analyzes initial station/time and final destination station/time information using the trip chain perspective.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.276-284
• /
• 2011

In our study, we present a new LOGIT-based traffic assignment model applicable to intercity railway network. Most traffic assignment models have been developed for public transit assignment in urban area, so that they are known to produce unrealistic results in intercity railway demand analysis. Especially, since the introduction of KTX, more passengers are using a route including KTX service and the schedule becomes more compatible with transfer. Our study presents a new LOGIT-based traffic assignment model considering passenger transfer. To do so, we suggest a new route search algorithm to find K paths with non increasing order in the utility value.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.38-39
• /
• 2010

수도권 대중교통 이용자는 2004년 서울시의 대중교통 체계 개편에 따라 교통 카드를 사용하여 버스와 지하철을 이용하게 되었다. 교통 카드를 사용하는 각 승객의 승차와 하차에 관한 데이터가 하나의 트랜잭션으로 구성되고, 하루 천만 건 이상의 트랜잭션들로 구성된 대용량 교통카드 트랜잭션 데이터베이스가 만들어지고 있다. 대중교통을 이용하는 승객들의 승차와 하차에 관한 여러 정보를 담고 있는 교통카드 트랜잭션 데이터베이스에서 유용한 패턴이나 정보를 탐사해내는 연구가 계속 진행되고 있다. 이런 연구 결과는 수도권 대중교통 정책을 입안하는데 중요한 기초 자료가 되고 수도권 승객들에게 대중교통을 보다 잘 이용할 수 있는 정보로 제공된다. 교통카드 이용률은 2006년 79.5%, 2007년 80.3%, 2008년 81.6%로 점차적으로 증가하고 있다. 대용량의 교통카드 트랜잭션 데이터베이스에 대한 연구를 살펴보면 하루 동안의 교통카드 트랜잭션 데이터베이스에서 순차 패턴을 탐사하는 알고리즘을 연구하였고[1], 승객들의 통행 패턴에 대한 분석연구를 확장하여 일 년에 하루씩 2004년에서 2006년까지 3일간의 교통카드 트랜잭션 데이터베이스로부터 승객 시퀀스의 평균 정류장 개수와 환승 횟수 등을 연도별로 비교하였다[2]. 수도권 지하철 시스템의 특성에 관한 연구로는 네트워크 구조 분석이 있었고[3], 승객의 기종점 통행 행렬(Origin-Destination trip matrix)에 의한 승객 흐름의 분포가 멱함수 법칙(power law)임을 보여주는 연구가 있었고[4], 지하철 교통망에서 모든 링크상의 승객들의 흐름을 찾아내는 연구가 있었다[5]. 본 논문에서는 교통카드 트랜잭션 데이터베이스에서 지하철 승객들의 통근 패턴을 탐사해내는 방법을 연구하였다. 수도권 지하철 네트워크에 대한 정보를 입력하고 하루치의 교통카드 트랜잭션 데이터베이스에 연구된 방법을 적용하여 8가지 통근 패턴들을 탐사해내고 분석하였다. 탐사된 패턴들 중에서 많은 승객들이 지지하는 출퇴근 패턴에 대해서는 시간대별로 승객수를 그래프로 보여주었다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.69-82
• /
• 2011

This paper tried to find out what the main factors are to impact on satisfaction level of transit passengers at Incheon airport. Incheon airport has made lots of transit facilities and services to attract transit passengers from neighboring airports to increase transit rate as high as advanced foreign airports such as Heathrow, Schiphol and Hong Kong. A survey was performed on 450 transit passengers resting at airport transit lounge in airside area. According to the result, it was found out to be significant factors affecting satisfaction of transit that convenience of security screening, price of duty-free product, a direction board & signage and terminal orientation among Chinese transit passengers. On the other hands, it seemed that Japanese transit passengers thought diversity of airline routes, convenient transfer flight schedule, total transit time and terminal orientation are major variables affecting their satisfaction. Considering the effect of demographic factors, Chinese passenger's satisfaction was more affected by age, travel purpose, the number of travel per year and flight destinations. However, Japanese transit passenger's satisfaction was only affected by the flight destinations, especially willing to travel to North America and Europe.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.217-228
• /
• 2021

After the integrated fare system has been applied, public transportation and transfer traffic increased. As a result, transfer passengers must be considered in the operation of the bus. Although previous studies have limitations due to utilizing deterministic mathematical models, which fails to reflect the stochastic movements of passengers and buses, in this study, a more realistic bus stop micro-simulation model is proposed. Based on the proposed simulation model, we represent the relationship between bus arrival interval and passenger wait time as a regression model and empirically show the differences between the cases with and without transfer passengers. Also, we propose a method converting passenger waiting time to cost and find optimal bus arrival interval based on the converted cost. It is expected the proposed method enables bottom-up decision making reflecting practical situation.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.267-275
• /
• 2009

Max-plus algebra is a nonlinear system comprised of two operations, maximization (max) and addition (Plus), which are corresponding to the addition and the multiplication in conventional algebra, respectively. This methodology is applicable to many discrete event systems containing the state transition with the maximization and addition operation. Timetable with connection is one of such systems. We present the method based on max-plus algebra, which can make up timetable considering transfer and analyse its stability and robustness. In this study, it will be shown how to make up the timetable of the urban train and analyse its stability using Max-Plus algebra.