• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.52-61
• /
• 2020

The natural change of winter night temperature from 00:00 to 04:30 O'clock with the different height of thermal screen in a venlo type glasshouse (W59×L68×H5.9 m) was studied using computational fluid dynamics (CFD). At the early stage of CFD analysis, the room temperature decrease of glasshouse with the 5.9 m height of thermal screen were faster than it with the 4.1m height of thermal screen, but at 2 hr after analysis it was slower than in it with the 4,1m, the temperature difference was 0.6℃ after 4 hr. If we consider that turn on the heater when the temperature were decrease below 13℃ at 1hr after CFD analysis, it is good for energy saving in the glasshouse with the 4.1 m height of thermal screen rather than in it with the 5.9 m height, because of the temperature decrease were slow during 2 hrs after analysis. The airflow at the height of 2 m which were grown tomato were fast and wide in the glasshouse with the 5.9 m height thermal screen rather than in it with the 4.1 m, the speed difference was 0.034m·s^-1 at 1hr after CFD analysis. The effect of temperature decrease in summer season were compared with the different height of shading screen from 12:00 to 14:30 O'clock. The height of shading screen were 5.7, 3.9 m, the gap of it were 30%. The air-inflow quantity by the fan with duct at lower part of venlo glasshouse was 0.67 ㎥·s^-1 until 1hr and to increase 3 times of it from 1hr after analysis. The roof window were open 100%. Until 1hr of CFD analysis, the temperature in the 30% open of shading screen was 0.9℃ higher than in the none shading screen. From 13:00 O'clock when the air-inlet quantity to increase 3 times, the temperature in case 30% gap of shading screen were decreased compare with the none shading screen, the temperature difference was 0.5℃ at 14:30 O'clock. The temperature on the floor surface in case 30% gap of shading screen were lower with it's height increase, the temperature difference was 8℃ compare with none shading screen. The relative humidity difference were insignificant by the height and gap of shading screen.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.371-382
• /
• 2019

The aim of this study was to evaluate the physiological responses following acute and chronic Nurida-ball exercise to measure the relative exercise intensity and health-related fitness in middle-aged men. In study 1, eight middle-aged men carried out acute Nurida-ball exercise for 30 min. The physiological responses were normalized and compared with a graded treadmill exercise test (GXT) to evaluate the relative exercise intensity. In study 2, twelve middle-aged men were divided into two groups: Nurida-ball exercise group (NB, n=6) and control group (CON, n=6). NB group performed the Nurida-ball exercise for 8 weeks (30min/day, 3 days/week). And then, we measured the body composition, cardiovascular factors, blood lipid factors, and muscle damage markers to confirm the exercise efficiency. In study 1, the related exercise intensity of acute Nurida-ball is the range of GXT-HRpeak (55~85%) and $GXT-VO_2peak$(23~61%). The change in body fat-related factors was significantly lower in the NB compared to the CON group. Moreover, TC and LDL were decreased whereas BMC was increased in the NB group after Nurida-ball exercise. The change in VEpeak and performance time of GXT were significantly greater in the NB compared to the CON group. The performance time of GXT was increased in the NB group after Nurida-ball exercise. Our results indicated that Nurida-ball exercise would be effective equipment for the improvement of health-related fitness. Especially, Nurida-ball exercise can affect body composition and cardiovascular function, which might alleviate metabolic syndrome-related diseases in middle-aged men.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.157-157
• /
• 2010

RDF는 장기저장이 가능한 것이 특징 중의 하나이지만, 우리나라보다 앞서 대량저장을 시작한 일본의 RDF 저장 사일로에서 폭발사고가 발생한 사례가 있어, RDF를 실제로 저장하여 RDF 온도 및 가연성가스 발생상황 등을 장기간 감시 측정하여 사일로 안전관리지표를 도출하였다. 실험에 사용한 RDF 저장조는 직경 3.1m, 높이 11.4m의 사일로방식으로 제작하였다. RDF 저장량은 $70m^3$이었으며, 저장기간은 475일이었다. 사일로에는 15개의 열전대를 설치하여 사일로 표면, 직경방향 1.2m 지점 및 기온을 측정하여 수직방향 및 수평방향의 온도변화를 분석하였다. 가스 샘플링포트는 온도측정지점과 동일한 위치 설치하여 진공펌프로 흡인하여 테트라 백에 포집하여 GC로 분석하였으며, 가스샘플링은 17회 실시하였다. 비교적 대형 저장설비이고 RDF가 열전도성이 낮은 물질임에도 불구하고 사일로 내부온도는 기온보다는 높았지만, 기온의 영향을 많이 받아 7월에 정점, 1월에 하점을 나타내는 사인곡선과 같은 패턴을 보였다. 측정지점별 온도차는 수평방향 보다 수직방향에서 높게 나타났으며, RDF층으로 전열 및 축열이 진행되고 생화학반응을 촉진시키는 상승작용의 결과로 월평균온도가 $49^{\circ}C$를 나타내는 지점도 있었다. 실제 사일로는 RDF의 투입과 배출이 연속적으로 진행되어 방열이 이루어지므로 하계에 대량저장을 실시하지 않는 한 RDF층 내부에서 생화학적 반응열이 생성되더라도 $40^{\circ}C$를 상회할 가능성은 매우 희박할 것으로 판단된다. RDF 저장시 발생하는 가스는 대부분 $CO_2$였으며, 미량이지만 $H_2$, CO, $CH_4$도 검출되었다. 가연성 가스는 저장 후 2개월 동안은 발생하지 않았으며, 하계에는 타 계절에 비해 상대적으로 고농도로 검출되었다. 발생가스와 온도 및 $CO_2$와 $H_2$농도의 상관성은 높게 나타나지 않았지만, 정의 상관관계를 나타내었다. 저장한 RDF의 성상(수분, 발열량, 분화물)은 실험개시 전의 RDF분석결과와 실험종료 후 분석결과에서는 큰 차이가 나타나지 않았다. 따라서 RDF의 안전 저장을 위해서는 (1) 반입되는 RDF성상관리, (2) RDF가 2개월 이상 장기간 체류하는 데드스페이스가 발생하지 않고 선입선출이 확보되는 저장조 설계, (3) 사일로 내부에 최소 3개 이상의 지점에서 온도를 측정하여 상시감시하고 $40^{\circ}C$이하로 관리, (4) 발생가스는 CO, $CO_2$, $H_2$, $CH_4$ 등의 가연성가스를 모두 측정 감시하는 것이 바람직하지만, 최소 $CO_2$와 $H_2$는 상시감시하고 각각 1%와 100ppm 미만으로 관리, (5) 배풍기 등을 이용한 상시 환기실시, (6) 하계에는 대량저장이 이루어지지 않도록 저장조 운용계획 수립 등을 실시해야 한다.

• Journal of the Korean Institute of Gas
• /
• v.20 no.3
• /
• pp.46-51
• /
• 2016

Natural gas liquefaction process which spends a huge amount energy is operated under cryogenic conditions. Thus, many researchers have studied on minimizing energy consumption of LNG plant. However, a few studied for cost optimization have performed. This study focused on the cost analysis for the single mixed refrigerant (SMR) process, one of the simplest natural gas liquefaction process, which has different capacity. The process capacity is increased from 1 million ton per annum (MTPA) to 2.5 MTPA by 0.5 MTPA steps. According to the increase of plant size, only flow rate of natural gas and mixed refrigerant are increased and other operating conditions are fixed. Aspen Economic Evaluator(v.8.7) is used for the cost analysis and six tenths factor rule is applied to obtain multi stream heat exchanger cost data which is not supplied by Aspen Economic Evaluator. Moreover, the optimal plant sizes for different sizes of gas wells are found as the result of applying plant cost to small scale gas wells, 20 million ton (MT), 40 MT, and 80 MT. Through this cost analysis, the foundation is built to optimize LNG plant in terms of the cost.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.255-267
• /
• 2009

The purpose of this study is to evaluate the importance and performance of the educational laboratory facilities for culinary practice. The questionnaire was distributed to 100 students enrolled in the culinary arts department at Y University located in Chung-buk province, and a total of 71 usable, completed questionnaires were received for the research. Collected data was statistically analyzed using the SPSS 10.0 Windows version, and the IPA(Importance-Performance Analysis) was conducted to compare importance and satisfaction from kitchen laboratory facilities which have been a key element of culinary education. Results of this study can be summarized as follows. Firstly, it was found that performance (M=3.42) for culinary practice facilities was lower than importance(M=4.09) for culinary practice facilities. Secondly, through IPA, the importance and satisfaction of culinary laboratory elements showed some differences between the students who had have some educational experience in culinary art prior to enrollmnet and those who had not. The former students attached importance to the usefulness of facilities rather than the size of facilities. And as rapidly improved factors, they answered ventilation and water supply facilities for culinary laboratories. The application of this study in physical environment of culinary education will contribute to improve students` satisfaction with the quality of education. However, the critical point of this study is a limited sampling, so the results of this study cannot be generalized.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.111-115
• /
• 2006

Jinbudlsongyi mushroom (Agrocybe aegerita) was bred in Mushroom Research Institute, Gyonggi Province A.R.E.S in 2005. It was bred with mating between moookarytic strains isolated from Budlsongyi#1 and KME45202. The temperature of optimal mycelial growth was $24{\sim}26^{\circ}C$ on PDA and $18{\sim}20^{\circ}C$ in sawdust medium. To harvest fruiting body of Jiobudlsoogyi the period required for colonization after inoculation was 37days and the period of cultivation was 13days after scratching of inoculum. The major characteristics of the mushroom was shown a lot of primordia, light brown colored stipe and convex-shaped pileus. Compared with Budlsongyi#1, it was shown dark brown-colored pileus and straight stipe. The fruiting body yield was $115g{\pm}6/850cc$ bottle. It was demanded proper circulation at the time of primordia and put it around with cloth that is prevented to be bend the stipes.

• Clean Technology
• /
• v.23 no.4
• /
• pp.441-447
• /
• 2017

The economic analysis for the power plant developed in the conceptual design phase is becoming more important and, research on process optimization for process development that meets the target economic is actively carried out. In the filed of power generation systems, economic assessment methods to predict the levelized cost of electricity (LCOE) has been widely applied for comparing economic effect quantitatively. In this paper, the platform that design criteria of key component required to optimize economic of power cycle can be calculated reversely was established roughly and design criteria of the key equipment (Compressor, turbine, heat exchanger) required to meet the target LCOE (the LCOE of supercritical steam Rankine cycle) was derived when the supercritical $CO_2$ power cycle is applied to the coal-fired power plant.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.39-47
• /
• 1998

A fourth-order $\Sigma$-$\Delta$ modulator is designed and implemented in 0.6 $\mu\textrm{m}$ CMOS technology. The modulator is verified by introducing nonlinear factors such as DC gain and slew rate in system model that determines the transfer function in S-domain and in time-domain. Dynamic range is more than 110 dB and the peak SM is 102.6 dB at a clock rate of 2.8224 MHz for voiceband signal. The structure of a ∑-$\Delta$ modulator is a modified fourth-order ∑-$\Delta$ modulator using direct feedback loop method, which improves performance and consumes less power. The transmission zero for noise is located in the first-second integrator loop, which reduces entire size of capacitors, reduces the active area of the chip, improves the performance, and reduces power dissipation. The system is stable because the output variation with respect to unit time is small compared with that of the third integrator. It is easy to implement because the size of the capacitor in the first integrator, and the size of the third integrator is small because we use the noise reduction technique. This paper represents a new design method by modeling that conceptually decides transfer function in S-domain and in Z-domain, determines the cutoff frequency of signal, maximizes signal power in each integrator, and decides optimal transmission-zero frequency for noise. The active area of the prototype chip is 5.25$\textrm{mm}^2$, and it dissipates 10 mW of power from a 5V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.29-38
• /
• 2009

In this paper, a high performance pipelined computing design of parallel multiplier-temporal buffer-parallel accumulator is present for the convolution-based non-cascaded architecture aiming at the real time Discrete Wavelet Transform(DWT) processing. The convolved multiplication of DWT would be reduced upto 1/4 by utilizing the filter coefficients symmetry and the up/down sampling; and it could be dealt with 3-5 times faster computation by LUT-based DA multiplication of multiple filter coefficients parallelized for product terms with an image data. Further, the reutilization of computed product terms could be achieved by storing in the temporal buffer, which yields the saving of computation as well as dynamic power by 50%. The convolved product terms of image data and filter coefficients are realigned and stored in the temporal buffer for the accumulated addition. Then, the buffer management of parallel aligned storage is carried out for the high speed sequential retrieval of parallel accumulations. The convolved computation is pipelined with parallel multiplier-temporal buffer-parallel accumulation in which the parallelization of temporal buffer and accumulator is optimize, with respect to the performance of parallel DA multiplier, to improve the pipelining performance. The proposed architecture is back-end designed with 0.18um library, which verifies the 30fps throughput of SVGA(800$\times$600) images at 90MHz.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.244-248
• /
• 2013

"Hwaseong 5ho" was developed by the method of Di-mon mating between monokaryotic strains derived from "Hwaseong 1ho" and dikaryotic strain "PSC109". The color of pileus was dark grayish brown, the shape of pileus was convex or infundibuliform. The length of stipe was longer and the thickness of stipe was some thinner than Suhan 1ho. Material properties of stipe of "Hwaseong 5ho" was higher in strength, hardness, chewingness and brittleness than Suhan 1ho, but similar in elasticity and cohesion. RAPD using URP-primer showed not the same between two strains. Days of primordia formation period were 22-27 days after spawning, that was a little later than Suhan 1ho. In the trial using culture box containing composted cotton waste, yield index of 'Hwaseong 5ho' was 16.6% higher than Suhan 1ho. The farm field trial were showed stable productivity in each different growing conditions.