• Journal of Chest Surgery
• /
• v.40 no.11
• /
• pp.752-758
• /
• 2007

Background: Thoracic sympathetic block surgery is a safe and effective procedure for palmar hyperhydrosis, and this maintains sufficient moisture and prevents compensatory hyperhidrosis. To avoid compensatory hyperhidrosis, the authors performed sympathetic block surgery just above the R4 level to maintain sympathetic tone affecting the caudal area. Material and Method: A total of 71 subjects (45 males and 26 females) were categorized into two groups. Group 1 (31 patients, mean age: 25.5 years) had clips placed both on the upper and lower part of R4 sympathetic ganglion, and group 2 (40 patients, mean age: 25.9 years) underwent clipping of the upper part of R4. Telephone surveys were done to collect data on 8 categories, and the average follow up interval was 24.9 months (group 1) and 18.9 months (group 2). Result: For group 1, 41.9% experienced no sweating and 48.4% re-plied they experienced some sweating depending on the surrounding conditions. Group 2 showed that 60% experienced no sweating and 35% replied they experienced some sweating depending on the surrounding conditions, 58.1% in group 1 experienced sweating right after the surgery, and 40.0% in group 2 experienced the same. Group 1 (38.1%) and group 2 (37.5%) replied they experienced no hand dryness and more patients in group 2 than in group 1 had hand dryness, but without uncomfortable symptoms. 71.0% (group 1) and 62.5% (group 2) replied they had no compensatory hyperhidrosis or related symptoms. One patient in group 1 and two in group 2 reported they regretted undergoing the procedure. The regions of compensatory hyperhidrosis were the back, thigh and chest in group 1 and the group 2 reported the back, chest, and abdomen in the order of frequency. Fewer incidences of the gustatory hyperhidrosis were noted in group 2. Most of the patients were satisfied with their treatment. Conclusion: Clipping the upper part of the R4 ganglion or R4 sympathetic block are both effective for treating palmar hyperhidrosis and these treatments decrease the occurrence or symptoms of compensatory hyperhidrosis. The upper R4 sympathetic block procedure is easier and safer with fewer incidences of gustatory hyperhidrosis and a higher percentage of patient satisfaction.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.373-380
• /
• 2013

The study aimed to develop prediction models of primal cut yield using body measurements of Hanwoo steers in Korea. The progeny of 874 steers at Hanwoo Improvement Main Center from 2008 to 2010 were recorded. Pearson's correlation coefficients for primal cuts and other traits were estimated. Primal cuts were adjusted for slaughter date and age using the SAS GLM procedure. Afterwards, a stepwise regression was performed on each primal cut by fitting body measurement traits. An independent covariable was selected at the highest coefficient of determination with the greater fitness model using Mallows's Cp statistic. Results showed that primal cuts were significantly influenced by slaughter date (P<0.01). The age at slaughter, however, was only significant for the top round (P<0.05). There was a moderate to high correlation between chest girth and tenderloin (0.54), loin (0.74), and rib (0.80). Most primal cut percentages were negatively related to BFT. Similar negative to low positive correlations were observed for primal cut percentage and body size traits. In addition, a correlation of 0.21 was observed between rib percentage and chest girth. The regression of body measurements on the adjusted primal cuts were significant for later traits. Regression estimates revealed that wither height, body length, rump length, hip bone width, and chest girth are important for primal cut weight and percentage determination. In particular, chest girth was always important for primal cut weight estimates.

• Archives of design research
• /
• v.15 no.4
• /
• pp.97-110
• /
• 2002

As users environments change, users primary needs for homepages also change more complicatedly. Today, users do not only want usability for homepages, but also to feel appropriate emotional experiences. Despite users needs, users do not always experience appropriate emotions that are conveyed by designers through homepage. I In this research paper, we analyzed the related factors with the emotional quality, which means the degree that users feel target emotions intended by designers. For analyzing factors related with the emotional quality, three hypotheses were verified; the factor of an emotion, the factor of users and the factor of designers. As the factor of emotions, the first hypothesis is that unclear emotional dimensions in users minds are related with the emotional quality. The second hypothesis, as the factor of users, is that the diversity of users experiences by same homepage is related with the emotional quality. The third hypothesis, as the factor of designers, is that the appropriate selection of design elements is related with the emotional quality. In the previous research, we selected the basic 13 emotional dimensions and 30 representative emotional words based on the statistical results and evaluations by professional designers. For this research, we conducted an experiment and user survey. In the experiment, we asked 30 designers to design homepages focusing on the typical emotion that was presented by a researcher. Based on the designing process and user evaluation, we performed statistical analyses: ANOVA with Tukey post hoc method and Factor Analysis. We found the discrepancy between the emotions that designers intend and the actual emotions that users experienced from homepages. From the result of analysis, we know that the factor of users and the factor of designers related with the emotional qualities, but the factor of emotions did not. The definiteness of emotions did not relate with the emotional quality. However, the diversity of emotions that users feel seeing the same homepages and design elements that designers chose for conveying target emotion related with the emotional quality.

• Journal of Yeungnam Medical Science
• /
• v.10 no.1
• /
• pp.103-113
• /
• 1993

This study was conducted to explore the feasibility of using the lead level in the hair of children as a screening test for lead intoxication of children and as an indicator for environmental pollution. Lead concentration of hair was measured for 268 seven to nine-year-old elementary school children in Taegu city (147 children) and Gampo town(121 children). The lead level in hair was measured by atomic absorption spectrophotometer equipped with a graphite furnace atomizer. The following information was obtained for all children: sex, age, father's occupation and smoking habits, kinds of hair cleaner, fingernail biting habits, and status of the child's hands and clothing. The mean lead level in hair was $8.7{\pm}2.9{\mu}g/g$ in the urban area and $7.7{\pm}2.2{\mu}g/g$ in the rural area. There were significant differences between two groups(p<0.01). The difference of lead levels in hair measured by cleanliness of the child's hands(clean: $7.4{\pm}2.7{\mu}g/g$, dirty: $8.2{\pm}2.6{\mu}g/g$) and child's clothing(clean: $8.0{\pm}2.5{\mu}g/g$, dirty: $9.3{\pm}2.6{\mu}g/g$) were statistically significant, but other factors were not significant. In multiple regression analysis, difference of residency and age were significant variables for lead level in the hair of children. These findings suggest that measurement of lead level in the hair is a useful method for the screening of the lead intoxication of children and monitoring environmental conditions.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.5-14
• /
• 2020

The study was initiated to reduce production cost and environmental pollution with the evaluation of nutrient requirement of 'Nero' black chokeberry (Aronia melanocarpa) and optimum amount of oil cake application. 100% of a recommended amount (RA) of oil cake was designated as a 100-RA, with 0-RA, 25-RA, 50-RA, and 75-RA for 0%, 25%, 50%, and 75% RA, respectively. The oil cake was scattered around the black chokeberry at every year for two years from 2018 to 2019, with investigation conducted for the second year. Soil mineral nutrient concentrations were not significantly different among the treatments. Dry weight (DW) of root and leaves was low for 0-RA-treated black chokeberry, with no significant difference observed for the all treatments for the DW of stems. 75-RA increased the fruit DW of 615 g and yield efficiency of 45.3%. Top:root ratio was the highest of 4.7 for 75-RA. Increased amount of oil cake application expanded the tree volume. Tree volume had a strong positive relationship with the root DW (r²=0.977). Mineral nutrient uptake in the root was the highest on the 25-RA-treated black chokeberry, except for Fe uptake. Mineral nutrient uptake in the leaves were similar to all the black chokeberries, except for T-N and Fe uptake. 75-RA increased mineral nutrient uptake in the fruit, except for Cu, in particular, 7.45 g in fruit N, which was the highest level compared to those of the other organs. T-N and P uptake were evenly distributed in the leaves, stems, and fruit, with high K uptake for leaves and fruit. 75-RA maximized to 17.2 g of the total nutrient uptake in a black chokeberry, with 4.9 g for the 0-RA. All mineral nutrient uptake were overall higher on the black chokeberry treated with 50-RA, 75-RA, and 100-RA compared to those of 0-RA and 25-RA.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.135-142
• /
• 2016

The purpose of this study is to evaluate propriety of using SID 180cm at Chest PA examination and to find effect of geometrical cause to the image. XGEO-GC80, INNOVISION-SH, CXDI-40EG detector and a chest phantom designed self-production was used for this study. Images were acquired at SID 180cm with changing the factor OID as 0, 75 and 83mm and were analyzed by Centricity Radiography RA1000 PACS system. Statistical program was used the SPSS (Version 22.0, SPSS, Chicago, IL, USA), p-value(under 0.05) was considered to be statistically significant. In OID 0 mm was enlarged about 2.7~3.5 mm than the actual degree of the HS, BS of phantom in all equipments. Compared with the calculated magnification has been expanded 1.6~2.8% when viewed. The OID 75 mm with OID 83 mm was extended from the CS and BS 6~8 mm range. Compared to the calculated values, the measured values are expanded from 6.1 to 7.9%. CS and BS according to the OID change showed a statistically significant difference (p<0.05) among each group, the post-analysis only OID 0 mm group appeared as an independent group, 75 mm and 83 mm are separated in the same group It was. But had no statistically significant difference could change depending on the OID (p>0.05), post-mortem analysis showed, both in the same group. Heart sizes appears larger than actual size 6~8 mm at chest PA examination which is enlarged 6.1~7.9% more than the actual theoretical value. We can find magnification of the image because of the increase of the OID due to technical limitations between cover of standing detector and the image plate. so we suggest to have occurred between them when considering the need to adjust the equipment installed by the SID to match the characteristics of the equipment.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.275-282
• /
• 2018

Miscanthus species are known as a genus of eco-friendly and low-maintenance cost ornamental grasses. Plug and cutting methods were tested for multi-propagation of most promising ornamental Miscanthus species in greenhouse and field plot. The plug formation period with three different cell sizes with four cultivars (M. sinensis 'Andersson', 'Strictus', 'Gracillimus', 'Variegatus') were evaluated the seedling development stages with two irrigation types of the over-head and the bottom watering in greenhouse and field plot afterward during 2015-2016 season. In seedling plug test, the size of tray cell affected the plug formation. Bottom irrigation resulted positively on plant height, weight, root and tiller development compared with the over-head irrigation. Plug cell size affected the plant growth in the field after transplanting. All of the 3 Miscanthus species showed higher rates of successful propagation at the lower nodes before inflorescence formation (vegetative growth stage). To analyze the survival factors of M. xgiganteus cutting, the cutting time, node part, and culm diameter were tested as independent variables with the binary logistic model. The survival probability was influenced by node part and culm diameter significantly. The third and fifth node parts showed 0.12 (8X higher failure probability) and 0.02 (50X higher failure probability) times less survival probability. It means the survival probability will be increased by using older and lower part of cuttings during a vegetative growth stage before inflorescences of M. xgiganteus.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.299-308
• /
• 2001

We examined the growth variation with water depth, interval between suspended lines and locality of seedling production of sea squirt. Halocpthia roretzi, measuring approximately $10.1\~15.3$ mm in tunic height, was cultured at the farm near Guryongpo, Pohang city from 7 January to 6 December 1998 (333 days). Growth condition depending on culture depth was most favourable at the depth of $10\~12$m, It was concluded that nutritional conditions were better at the depth since there was a greater mount of phytoplankton than at any other depth in the water column. Growth condition depending on distance between suspended lines was most favourable at the interval of 2 m and 2.5 m than at the interval of t m and 1.5 m, There was no significance difference in growth variation with locality of seedling. The seasonal variations in growth of tunic height, meat and total weight were correlated with temperature and chlorophyll a, In the depth of $10\~12m$ the rate of increase in tunic height was generally greatest in the growth period II ($244{\mu}m/day$) and IV ($338{\mu}m/day$), lower in the period I ($108{\mu}m/day$), and slightly increased during the period III ($185{\mu}m/day$). The water column have showed a typical seasonal pattern with temperature ranged between $12.07{\sim}24.14^{\circ}C$ and over $20^{\circ}C$ between July and September.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.64-72
• /
• 1980

Industrial wastes from pulp and food plants were treated with microorganisms to clarify organic waste-water and to produce cells as animal feed, and results were summarized as follows. (1) Waste-water from pulp, beer, bread yeast, and ethanol distillation plants contained $1.4{\sim}1.5%$ of total sugar, $0.25{\sim}0.35%$ nitrogen, and biological oxygen demand (BOD) was $400{\sim}25,000$, chemical oxygen demand (COD), $500{\sim}28,000$, and pH, $3.8{\sim}7.0$. The BOD and COD were highest in waste-water from ethanol distillation plants among others. (2) Bacterial and yeast counts were $4{\times}10^4-1{\times}10^9,\;2{\times}10^2-7{\times}10^4/ml$ in waste-water. (3) Bacteria grew better in pulp waste and yeasts in beer, bread yeast, and ethanol distillation waste. (4) Saccharomyces cerevisiae SAFM 1008 and Candida curvata SAFM 70 were the most suitable microorganisms for clarification of ethanol distillation waste. (5) When liquid and solid waste from ethanol distillation were treated with microbial cellulase, xylanase, and pectinase, solid waste was reduced by 36%, soluble waste was increased, and recuding sugar content was increased by 1.3 times which provided better medium than untreated waste for cultivation of yeasts. (6) Optimum growth conditions of the two species of yeast in ethanol distillation waste were pH 5.0, $30^{\circ}C$, and addition of 0.2% of urea, 0.1% of $KH_2PO_4$ and 0.02% of $MgSO_4$. (7) Minimum number of yeast for proper propagation was $1.8{\times}10^5/ml$. (8) C. curvata70 was better than cerevisae for the production of yeast cells from ethanol distillation waste treated with microbial enzymes. (9) S. cerevisiae produced 16 g of dried cell per 1,000ml of ethanol distillation waste and reduced BOD by 46%. C. curvata produced 17.6g of dried cell and reduced BOD by 52% at the same condition. (10) Yeast cells produced from the ethanol distillation waste contained 46-52% protein indicating suitability as a protein source for animal feed.