• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.87-94
• /
• 2019

In this paper, we test procedures to demonstrate operating environmental conditions that can be exposed to UAV during its life-cycle are proposed. They are set up to be used in a large-sized climate chamber, one of the facilities of the Agency for Defense Development corresponding with the system requirements. The test steps and profile details were more specifically suggested for rainfall, humidity, and temperature (low-temperature storage and operation, high-temperature operation and solar radiation), and MIL-STD-810G w/Change-1-based.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.104-111
• /
• 2005

Gas turbine engines for aircraft are usually operated at the altitude condition which is quite different from the ground condition. In order to measure the precise performance data at the altitude condition, the engine should be tested at the altitude condition by a real flight test or an altitude simulation test with an altitude test facility. In this paper, the present state of the altitude test facility and the test technologies at urn(Korea Aerospace Research Institute) will be introduced.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.34.1-34.1
• /
• 2011

태양전지 모듈의 25년 이상 보증을 위해 태양전지 모듈을 구성하는 부품 소재의 장기 열화메카니즘 연구가 중요시되고 있다. 그 중 봉지제(Encapsulation) 부품으로 적용되고 있는 태양전지 모듈용 에틸렌 비닐 아세테이트(Ethylene Vinyl Acetate, EVA)는 셀을 보호하는 폴리머 부품으로 장기 열화특성 연구가 중요하다. 따라서 EVA를 가속열화하여 25년 보증 내구성을 보유하고 있는지 연구가 필요하다. 본 연구에서는 태양전지 모듈을 구성하는 재료 중 외부환경에 민감한 폴리머 소재인 EVA의 Ultraviolet (UV), 온도 두 환경스트레스 조건을 적용한 가속수명시험을 수행하고 장기 열화메카니즘을 분석하였다. 시험에 앞서 UV/온도 가속수명시험을 설계하였다. UV/온도 가속조건을 설정하기 위해 실환경에서 변화하는 UV와 온도를 일정한 값으로 나타낼 수 있는 유효 UV (Effective UV)와 유효 온도(Effective temperature)를 도출하였다. 이를 통해 UV/온도 가속조건을 설정하였고 1년 및 25년 동안 EVA에 인가되는 stress와 동일한 양을 인가할 수 있는 시험시간을 결정하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.203-208
• /
• 2016

In this study, to clarify the differences rebar corrosion beginning, through the actual corrosion accelerated test in corrosion time and laboratory test chamber of the structure of the marine environment results in both environments, it is an object of correlation coefficient derived. The accelerated corrosion test was carried out by two case, I.e., one is $20^{\circ}C$ of low temperaure codition(case 1), and the other is $65^{\circ}C$ of high temperaute codition(case 2). Whether corroions occurs, it was measures using half-cell potential method. The results indicated that case 2 is to acclerate the corrosion of rebar about 1.7~1.8 times as compared with case 1, thenthe corrosion of rebar embadded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between acclerated corrosion test and long-term exposure test, case 1 is 2.45 to 2.94, and case 2 is 4.37~4.99.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.105-113
• /
• 2021

This paper delineates the applied thermal environmental test profiles using test conditions and procedures based on MIL-STD-810 Method 501 (High Temperature Test Method) and Method 502 (Low Temperature Test Method). The test profiles have been optimized in order to comply with export customer's requirements and product reliability in high and low temperature environment for XKT-1 (KT-1 Export Version) aircraft. Additionally, the tests are suitable for large sized environmental chambers, which is one of the facilities of ADD (Agency for Defense Development) according to ETEMP (Environmental Test and Evaluation Master Plan). The results of these test profiles and test executions satisfy the customer requirements and product reliability. The present paper can be applied to the other export programs with more severe temperature conditions.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.190-200
• /
• 2007

A pyrogen type igniter was designed to satisfy the requirements of KSLV-I Kick Motor system. To insure the reliability of the igniter before the production of the flight model, we have been performed the structure, environmental, combustion tests. The hydraulic test was carried out to confirm the strength of the components of the igniter. The shock and vibration tests were considered to check whether the igniter operates normally under the severe environmental condition. The combustion tests were also performed to understand the ignition characteristics with the variation of initial condition. Finally, we confirmed that the igniter could provide the acceptable energy to ignite the propellant of kick motor at the ground test.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.211-218
• /
• 2013

Cyclic wet and dry conditions in the marine environment structures corrosion is known to be the fastest rising. For that reason, accelerated corrosion test methods for the reproduction of tidal environment has been actively conducted. However, many studies have estimated threshold value for steel corrosion or concentrated in chloride penetration analysis. In this study, cyclic wet and dry conditions to reproduce the structure of the environment in accelerated corrosion and chloride penetration test analysis was performed. Corrosion was determined by the result of reinforcement corrosion monitoring based on galvanic potential measurement and half-cell potential method. Accelerated corrosion test results for each formulation was different corrosion periods, the order OPC> FA> BS> High-strength concrete. FEM durability interpretation program DuCOM was conducted under the same conditions as in accelerated corrosion test. The experimental RCPT tests demonstrated the validity of the result.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.283-288
• /
• 2018

Since the crack self-healing materials are activated according to the exposure environmental conditions from the time of crack occurrence, it is very important to clarify the relationship between the healing performance and the exposure environmental conditions of the crack surface. In this paper, the influence of the exposure environmental conditions on the crack healing performance of self-healing repair mortar was investigated through the water permeability test. The influence of temperature and humidity on the crack width of cracked specimens was evaluated. As a result of measuring the change of the crack width, the effect of curing temperature was negligible but it was confirmed that crack-closing occurred due to the change of dry-wet condition. The healing materials produced on the crack surface of the specimens was identified as calcite minerals. Since the minerals with high density are precipitated under the influence of gravity, the healing performance is somewhat different according to the direction of the crack surface, and the healing performance was significantly improved in the wet exposure condition than the air exposure condition.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.64-68
• /
• 1996

수중음파전달 모델은 benchmark 시험을 통해 정확도, 적용범위, 계산시간 등의 성능을 평가받는다. 본 논문에서는 analytic 모델, 정상 모드 모델(normal mode model), 포물선 방정식 모델(parabolic equation model), 가우시안 빔 모델(Gaussian beam model), 스펙트럼 모델(spectral model) 등 거리의존 모델에 대해 benchmark 시험을 수행하였으며, benchmark 시험은 다음과 같은 세 가지 거리의존 해양환경으로 나누어 실시했다 : 1) 해수면과 해저면이 Dirichlet 경계조건인 이상 쐐기 문제(ideal wedge problem), 2) 해수면은 앞서 말한 Dirichlet 경계조건이나 해저면은 전달 손실이 있는 손실 통과 해저면 쐐기 문제(penetrable lossy bottom wedge problem), 3) 해수면은 앞서 말한 Dirichlet 경계조건이고 해저면은 Neumann 경계조건으로 서로 평행이면 음파전달 속도가 거리방향 의존인 경우, 경우 1은 anaytic 모델을 사용하고 경우 2는 정상 모드 모델, 포물선 방정식 모델, 스펙트럼 모델을 사용하였으며, 경우 3에 대해서는 가우시안 빔 모델과 포물선 방정식 모델을 사용하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.100.1-100.1
• /
• 2012

태양전지 모듈의 25년 이상 장기간 정상 발전을 위해 태양전지 모듈을 구성하는 부품 소재의 장기 열화메커니즘 연구가 중요시되고 있다. 결정질 및 박막 태양전지 모듈 내 셀을 보호하기 위한 봉지재(Encapsulation)로 다양한 폴리머 재료가 적용되고 있다. 봉지재 부품으로 적용되고 있는 에틸렌 비닐 아세테이트(Ethylene Vinyl Acetate, EVA)는 장기 열화특성 및 내구성 개선 연구가 중요하다. 따라서 EVA를 가속열화하여 열화메커니즘 분석과 25년 보증 내구성을 보유하고 있는지 연구가 필요하다. 본 연구에서는 EVA의 Ultraviolet(UV), 온도 복합 환경스트레스 조건을 적용한 가속시험을 수행하고 장기 열화메커니즘을 분석하였다. 수명 및 손상모델을 이용하여 실환경에서 변화하는 UV와 온도를 일정한 값으로 나타낼 수 있는 UV/온도 가속조건을 설계하였다. 이를 통해 UV/온도 가속조건을 설정하였고 1년 및 25년 동안 EVA에 인가되는 stress와 유사한 양을 인가할 수 있는 시험시간을 결정하였다. 시험 후 전자현미경, AFM, FT-IR, TGA, DSC 등의 분석을 통해 열화메커니즘을 도출하였다.