• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.34-44
• /
• 1989

The stability of rice cultivation in Korea is largely depended on climatic conditions, especially, low temperature at the period of early growth stage and after heading. The improvement of cold tolerant varieties and appropriate cultural practices in rice are very effective to minimize the cold damage. This paper is summarized the mechanism and counterplans of cold injury of rice plants. The paddy area having commonly cold injury in Korea is approximately 15, 522ha in 1,709 sites on the national scale. The cold damage at seedling stage in nursery bed appeared to poor germination, leaf discoloration, dead seedlings and seedling rot ect.. At the vegetative stage, the decreased tiller number due to poor rooting and the delayed heading caused by slow growth and panicle differentiation are commonly showed. The cold injury at early reproductive stage appeared to the degeneration of spikelets and rachis - branches, while that at meiosis stage showed to increased sterility due to poor development of pollen and shortened panicle length with delaying heading, therefore the grain yield is largely decreased. The cold damage at heading and ripening stages showed to poor pollination and fertilization, low panicle exsertion, poor grain filling and finally grain quality became low. To minimize the cold injury to rice plants by low temperature, following counterplans would be recommonded ; Improvement of the cold toelrant rice varieties for the regions of midmountains and alpines. Raising healthy seedlings at upland nursery beds and by using of growth regulators such as ABA, Fuchiwang and Tachiace. Soil improvement and organic matter application to reduce cold damage by increasing water and fertilizer holding capacities in the paddy field having commonly cold water and in the place where cold damage is regularly occurred. Appropriate fertilization for raising healthy rice plants to tolerate under low temperature condition. Water management to increase water temperature in the paddy such as depth watering, round channels and polyethylene tubes around the field. Establishment of the optimum cultivation time of rice based on minimum, mean and maximum temperatures at different regions with appropriate rice varieties.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.91-99
• /
• 1995

One of alternative conventional technologies used for treatment of livestock wastes is composting process, and recently some mechanical composting processes are being practiced. It is, however, recognized the composting process also has its own limitations such as longer time requirement, and difficulties to estimate the degree of decomposition, etc. The incomplete compost contains potentially harmful materials to crops and public health due to instabilized organic contents and pathogenic organisms. The purpose of this investigation is to develop an innovative system whereby anxious livestock wastes are thoroughly stabilized and disinfected. Thus the overall management scheme should meet the following requirements. 1. A system should be in a cost-effective and environmentally sound manner. 2. Sludges must be chemically stabilized and bacteriologically safe. 3. Odor-free by product should be applied to crop land. 4. Sludges are sources of fertilizer nutrients and/or soil amendments to enhance crop production. 5. And they can be used as potential pH adjusting agent of the acidified soils. Overall effectiveness of the developed system is experimentally tested to satisfy the preset criteria and requirements. Major experiments are divided into four categories: they are 1. chemical stability test, 2. optimal condition test of stabilization process, 3. bacteriological examination and disinfection tests, and 4. deodorization tests The stabilization process is consisted of the stabilizing reaction process and the drying process. Stabilized wastes is dried by both sun dryer and rotary dryer. It is shown that an additive dosage of about g/kg solid in wastes with a minimum of 5-minutes reaction would be necessary for effective stabilization reaction. The stabilization process is consisted of the stabilizing reaction process and drying process. Stabilized wastes are dried by both sun dryer and rotary dryer. It is shown that an additive dosage of about 300g/kg solid in wastes with a minimum of 5-minutes reaction would be necessary for effective stabilization reaction. In the stabilization reaction process, the pH of wastes is lowered from initial values of 12.3 to 8.6. High pH prevents odor production and kills pathogenic organisms. Organic matter contents in the stabilized wastes are about 50% and the sum of contents of fertilizer elements such as total nitrogen, $P_2O_5$ and $K_2O$ are about 5.3%. The livestock wastes that are stabilized chemically and hygienically can be used as a good soil conditioner and/or organic fertilizer.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.69-78
• /
• 2017

This study was conducted to investigate the effects of waterlogging on the net photosynthetic rate, root activity and fruit yield of hot pepper. Plants were grown in two greenhouses: extractor fans and side ventilators began to operate when the inside temperature reached $25^{\circ}C$ in one greenhouse and $35^{\circ}C$ in the other. Waterlogging treatments were performed 54 days after transplanting (when fruit setting at the second flower truss was complete). The plot in each greenhouse was divided into five sections, and each section was watered for 0, 12, 24, 48 or 72 h using drip irrigation. Plants under $25^{\circ}C$ and non - waterlogging treatment exhibited in the greatest growth among treatments. Plant growth generally decreased as the waterlogging period increased. The net photosynthetic rate was highest under non - waterlogging and $25^{\circ}C$ treatment and lowest under 72 h waterlogging and $25^{\circ}C$ treatment. The root activity decreased as the waterlogging period increased, except for plants under 72 h waterlogging treatment at $35^{\circ}C$. The number and weight of red pepper fruits per plant were highest under non - waterlogging treatment at $35^{\circ}C$. The greatest fruit yield was also observed under non - waterlogging treatment at $35^{\circ}C$, with production reaching 3,697 kg / 10a. At the appropriate temperature for hot pepper ($25^{\circ}C$), yields were reduced by 25 - 30% under 12, 24 and 48 h waterlogging treatment compared to non - waterlogging treatment. These results indicate that longer waterlogging periods reduce the growth, net photosynthetic rate, root activity and yields of hot pepper. However, the net photosynthetic rate and stomatal conductance of hot pepper plants grown under 72 h waterlogging treatment recovered nine days after growth under normal growth conditions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.226-236
• /
• 2002

The purpose of this study was to get descriptive statistics of the contributing factors for early childhood caries and to predict the relationship of dietary, behavior factors and health status factors of the mother and child at pregnancy and after birth. 411 first caregivers of 5-year-old children in 12 kindergartens in Kangnung city were selected by stratified random cluster sampling. They were asked to fill out questionnaires and 364 of them responded. The obtained results were as follow: 1. Over the three-Fourth of children used nursing bottle or had breast feeding habit beyond the age of 1 year. 2. 8.7% of respondents didn't recognize the necessity of the preventive measures immediate after eruption of primary tooth, and only 35.1% replied that they had begun tooth cleaning. 3. Over 90% of children brush the teeth more than once per day. But over half (614%) of them brush their teeth without parents instruction. Sixty percent of children eat between the meals as often as 1-3 time(s) a day and the remainder at any times. 4. The first time of dental visit was for most children (87%) at over 3 years, recommending the earlier dental visit. Notwithstanding the rate of routine dental visit experience was relatively high(40.2%), implicating positive parents' attitude about oral health at Kangnung area. 5. The relationships between oral health state of the parents and the variables such as the timing of the first tooth cleaning, the frequency of brushing, the time of first dental visit, and the reason of first dental visit were not statistically significant. Together, there was no statistically significant difference between rural and urban area, private and public kindergarten, and boy and girl($x^2-test$, p>.05 or Fisher's exact test, p>.05).

• Journal of Radiation Protection and Research
• /
• v.23 no.3
• /
• pp.123-138
• /
• 1998

Characteristics of element responses of Panasonic UD802 personnel dosimeters in the X, ${\beta}$, ${\gamma}$, ${\gamma}/X$, ${\gamma}/{\beta}$ and ${\gamma}$/neutron mixed fields were assessed. A dose-response algorithm has been developed to decide the high probability of a radiation type and energy by using the distribution in all six ratios of the multi-element TLD. To calculate the 4-element response factors and ratios between the elements of the Panasonic TLDs in the X, $\beta$, and $\gamma$ radiation fields, Panasonic’s UD802 TLDs were irradiated with KINS’s reference irradiation facility. In the photon radiation field, this study confirms that element-3 (E3) and element-4 (E4) of the Panasonic TLDs show energy dependent both in low- and intermediate-energy range, while element-1 (E1) and element-2 (E2) show little energy dependency in the entire whole range. The algorithm, which was developed in this study, was applied to the Panasonic personnel dosimetry system with UD716AGL reader and UD802 TLDs. Performance tests of the algorithm developed was conducted according to the standards and criteria recommended in the ANSI N13.11. The sum of biases and standard deviations was less than 0.232. The values of biases and standard deviations are distributed within a triangle of a lateral value of 0.3 in the ordinate and abscissa, With the above algorithm, Panasonic TLDs satisfactorily perform optimum dose assessment even under an abnormal response of the TLD elements to the energy imparted. This algorithm can be applied to a more rigorous dose assessment by distinguishing an unexpected dose from the planned dose for the most practical purposes, and is useful in conducting an effective personnel dose control program.

• Vending industry
• /
• v.2 no.5 s.6
• /
• pp.56-62
• /
• 2002

담배자판기의 신규설치를 금지하고 기존 설치된 자판기마저 전면철거하도록 하는 보건복지부의 초강력 규제안이 마침내 철회가 되게 되었다. 보건복지부는 올 들어 확대되는 금연정책에 편승, 기존 흡연 구역 내 담배자판기 신규설치를 금지하고, 기존 설치된 제품들마저 전면철거하는 규제를 담은 국민건강증진법 시행령 개정안을 지난 4월 공고하며 그 입법추진을 진행한 바 있다. 이 공고안은 그간 국무총리실 산하 규제개혁위원회 분과위원회에 상정되어 1,2차 심의를 진행해 오다 지난 9월 27일 본회의를 통해 '보건복지부의 흡연구역 내 담배자판기 신규설치 금지 및 기존 자판기 철거는 명백히 영업활동 자유 및 재산권 침해에 해당된다.'는 이유로 이를 철회토록 하는 결정을 진행했다. 이 결정을 담은 국민건강증진법 개정안은 조만간 법제처 심사 및 차관회의 등을 거쳐 최종 확정 되게 된다. 이같은 규제개혁위원회의 결정은 협회를 중심으로 한 산업의 적극적인 대응이 있었기에 가능했다. 성인인증장치 도입을 통해 청소년 흡연문제를 완전, 해결하겠다는 산업계의 적극적인 자율대책에도 불구하고 아예 담배자판기를 뿌리 채 뽑겠다는 보건복지부의 행정만능주의적인 발상은 도저히 수용하지 못할 부당한 처사라는 데 관련업계가 인식을 같이 했다. 따라서 이를 반대하는 산업계 입장을 분명히 하며 분명히 하며 적극적인 저지 대응을 최근까지 진행해 왔다. 협회에서는 1차적으로 보건복지부 건강증진과에 담배자판기 전면철거에 대한 산업계 반대 입장을 피력하는 소견서 제출하고 적극적인 산업계의 반대의지를 피력하는 작업을 진행했다. 또한 청소년보호위원회를 통해 청소년 흡연감소를 위한 성인인증 담배자판기 설치 활용방안 건의하며 담배자판기의 긍정적인 활용측면을 집중 부각시키기도 했다. 재정경제부를 통해서는 담배사업법 관련 담배자판기 설치기준에 대한 질의를 통해 현행 관련법 내에서의 설치기준을 명확히 하기도 했다. 이같은 대응에 있어서의 핵심 설득 논리는 담배자판기가 이제는 성인인증장치 부착을 통해 청소년 및 사회적 위해 요인을 극소화 할 수 있다는 점에 있었다. 과거와는 달리 담배자판기가 오히려 청소년의 담배 구입루트 차단이라는 긍정적 역할을 할 수 있는 시점에 있어 이를 전면규제하기보다는 합법적인 설치 환경을 확보하여 사회적으로 떳떳하게 존재가치를 평가받을 수 있게 해달라는게 산업계의 초지일관의 주장이었던 것. 협회는 이같은 주장이 결코 산업계의 이기만이 아니라 세계적인 추세라는 점, 또 담배자판기를 전면철거까지 하면서 과당규제를 할 명분이 부족하다는 점을 반대논리로 적극 내세웠다. 규제개혁위원회가 이번 공공 이용시설 중 흡연구역으로 지정된 장소 내에 담배자판기는 설치 금지 및 철거규제에 철회권고를 내리게 된 것은 이러한 산업계의 주장을 적극 수용함에 힘입은 바 크다. 규제개혁위원회는 이번 결정의 주된 이유로 우선 기설치된 자판기에 대한 철거는 재산권 침해로 위헌 소지가 있음을 들고 있다. 또한 흡연자를 위한 흡연구역내에서마저 자판기 설치를 금지하는 등의 규제는 과도하며 흡연자의 권익보호 역시도 필요함을 인정하고 있다. 따라서 전면적인 규제보다는 청소년 이용통제 가능한 흡연구역에 한하여 담배자판기를 설치토록한 현행규정의 실질적 관리를 강화하며, 전체적으로 흡연구역을 축소 제한하는 방향으로 추진함이 바람직하다는 의견을 제시했다. 규제개혁위원회의 이번 결정으로 흡연구역 내 담배자판기의 설치는 현행법의 적용을 받게 되며, 산업계의 자율대책대로 성인인증 장치를 부착한 담배자판기의 설치 확대가 크게 촉발될 수 있을 것으로 기대된다. 담배자판기가 적극적이고 능동적인 사회적 역할을 할 수 있을 때 자연 이를 반대할 수 있는 명분도 약해질 수 밖에 없다. 산업계는 보다 신뢰성 있게 청소년 이용을 차단할 수 있는 담배자판기 관련 기술 수준을 향상시켜야 할 것이며, 협회에서는 담배자판기의 공공성과 역할에 대한 지속적인 계몽 홍보를 통해 소비자 인식을 고양시켜 나갈 수 있게 해야 할 것이다. 비록 전면 규제 완화가 어렵고 힘든 길이기는 하지만 소비자에게 신뢰성을 부여하고 청소년의 담배 구입 루트 차단에 혁혁한 역할을 다할 수 있게 된다면 그 입지기반을 재평가 받을 수 있게 될 것이다. 담배자판기의 내일은 이제 암울함이 아닌 서서히 희망을 비치는 쪽으로 급선회되고 있다.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1218-1226
• /
• 2008

With the development of semiconductor integrated technology and with the increasing use of multimedia functions in computer, more functions have been implemented as hardware. Nowadays, most microprocessors beyond 32 bits generally implement an integer multiplier as hardware. However, as for a divider, only specific microprocessor implements traditional SRT algorithm as hardware due to complexity of implementation and slow speed. This paper suggested an algorithm that uses a multiplier, 'w bit $\times$ w bit = 2w bit', to process $\frac{N}{D}$ integer division. That is, the reciprocal number D is first calculated, and then multiply dividend N to process integer division. In this paper, when the divisor D is '$D=0.d{\times}2^L$, 0.5 < 0.d < 1.0', approximate value of ' $\frac{1}{D}$', '$1.g{\times}2^{-L}$', which satisfies ' $0.d{\times}1.g=1+e$, $e<2^{-w}$', is defined as over reciprocal number and then an algorithm for over reciprocal number is suggested. This algorithm multiplies over reciprocal number '$01.g{\times}2^{-L}$' by dividend N to process $\frac{N}{D}$ integer division. The algorithm suggested in this paper doesn't require additional revision, because it can calculate correct reciprocal number. In addition, this algorithm uses only multiplier, so additional hardware for division is not required to implement microprocessor. Also, it shows faster speed than the conventional SRT algorithm and performs operation by word unit, accordingly it is more suitable to make compiler than the existing division algorithm. In conclusion, results from this study could be used widely for implementation SOC(System on Chip) and etc. which has been restricted to microprocessor and size of the hardware.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.12-28
• /
• 2021

Based on the global smart city promotion trend, in 2018, the "Fourth Industrial Revolution Committee" selected "sustainability" and "people-centered" as keywords in relation to the direction of domestic smart city policy. Accordingly, the Living Lab program, which is an active citizen-centered innovation methodology, is applied to each stage of the domestic smart city construction project. Through the Living Lab program, and in collaboration with the public and experts, the smart city discovers local issues as it focuses on citizens, devises solutions to sustainable urban problems, and formulates a regional development plan that reflects the needs of citizens. However, compared to citizen participation in urban regeneration projects that have been operated for a relatively long time, participation in smart city projects was found to significantly differ in level and sustainability. Therefore, this study conducted a comparative analysis of the characteristics of citizen participation at each stage of an urban regeneration project and, based on Arnstein's "Participation Ladder" model, examined the level of citizen participation activities in the Living Lab program carried out in a smart city commercial area from 2018 to 2019. The results indicated that citizen participation activities in the Living Lab conducted in the smart city project had a great influence on selecting smart city services, which fit the needs of local residents, and on determining the technological level of services appropriate to the region based on a relatively high level of authority, such as selection of smart city services or composition of solutions. However, most of the citizen participation activities were halted after the project's completion due to the one-off recruitment of citizen participation groups for the smart city construction project only. On the other hand, citizens' participation activities in the field of urban regeneration were focused on local communities, and continuous operation and management measures were being drawn from the project planning stage to the operation stage after the project was completed. This study presented a plan to revitalize citizen participation for the realization of a more sustainable smart city through a comparison of the characteristics and an examination of the level of citizen participation in such urban regeneration and smart city projects.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1827-1836
• /
• 2022

Disasters that occur unexpectedly are difficult to predict. In addition, the scale and damage are increasing compared to the past. Sometimes one disaster can develop into another disaster. Among the four stages of disaster management, search and rescue are carried out in the response stage when an emergency occurs. Therefore, personnel such as firefighters who are put into the scene are put in at a lot of risk. In this respect, in the initial response process at the disaster site, robots are a technology with high potential to reduce damage to human life and property. In addition, Light Detection And Ranging (LiDAR) can acquire a relatively wide range of 3D information using a laser. Due to its high accuracy and precision, it is a very useful sensor when considering the characteristics of a disaster site. Therefore, in this study, development and experiments were conducted so that the robot could perform real-time monitoring at the disaster site. Multi-sensor module was developed by combining LiDAR, Inertial Measurement Unit (IMU) sensor, and computing board. Then, this module was mounted on the robot, and a customized Simultaneous Localization and Mapping (SLAM) algorithm was developed. A method for stably mounting a multi-sensor module to a robot to maintain optimal accuracy at disaster sites was studied. And to check the performance of the module, SLAM was tested inside the disaster building, and various SLAM algorithms and distance comparisons were performed. As a result, PackSLAM developed in this study showed lower error compared to other algorithms, showing the possibility of application in disaster sites. In the future, in order to further enhance usability at disaster sites, various experiments will be conducted by establishing a rough terrain environment with many obstacles.