• 기계와재료
• /
• v.24 no.2
• /
• pp.38-46
• /
• 2012

인구의 증가와 급속한 산업화 그리고 편안함을 추구하고자 하는 문명의 이기로 인한 에너지 사용량 증가는 환경오염을 가속화시키는 문제를 유발하고 있어 전 세계적으로 심각한 사회문제로 대두되고 있다. 이에 반해 삶의 질의 향상에 따라 보다 쾌적한 환경에 대한 욕구와 인식의 변화로 환경보호에 대한 관심이 증가하는 추세이며, 이에 따라 각 국의 환경규제는 날로 강화되고 있다. 이러한 환경문제를 해결하기 위한 국제협력이 활발해지면서 무역과 연계된 국제 환경규제가 가속화되고 있으며, 환경선진국은 이러한 환경규제를 무역장벽으로 이용하고 있어 국가의 대외경쟁력에도 직 간접적으로 영향을 미치고 있다. 환경오염물질 중 질소산화물(NOx), 황산화물(SOx), 일산화탄소(CO), 이산화탄소($CO_2$) 및 휘발성유기화합물(VOCs), 다이옥신 그리고 입자상물질(PM)과 같은 대기오염물질은 대기 중으로 쉽게 확산되는 특성에 의해 인접한 지역까지 영향을 미치기 때문에 국제적인 규제대상의 초점이 되고 있으며, 경제협력개발기구(OECD, Organization for Economic Cooperation and Development), 유엔산하 국제해사기구(IMO, International Maritime Organization) 및 국제연소기구협회(CIMAC, International Council on Combustion engines)등 여러 국제기구를 중심으로 각종 규제수단을 개발하여 적용하고 있다. 특히, 국제해사기구(IMO)에서는 선박에서 발생되는 오염물질 등에 대한 규제강화를 위하여 새로운 국제해양오염방지협약(MARPOL)을 채택, 발효하여 그 규제 범위를 넓혀감에 따라 선박에 대한 각종 환경규제가 대폭 강화되고 있어 친환경 선박 및 관련 기술 개발이 활발히 진행 중에 있다. 이 글에서는 선박에서 배출되는 대기오염물질 중 그 자체로도 인체에 유해하며, 산성비, 광화학스모그 등 다양한 환경문제를 유발시키는 대표적인 물질인 질소산화물(NOx)과 질소산화물 배출규제에 대한 대응기술인 선택적촉매환원법(SCR, Selective Catalytic Reduction)과 SCR 탈질시스템에 사용되는 SCR 촉매에 대해 소개하고자 한다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.1
• /
• pp.75-84
• /
• 2007

The effects of hydrogen enrichment to methane on NOx formation have been investigated with swirl stabilized pre-mixed hydrogen enriched methane flame in a laboratory-scale pre-mixed combustor(nominally of 5,000 kcal/hr). The hydrogen enriched methane fuel and air were mixed in a pre-mixer and introduced to the combustor through different degrees of swirl vanes. The flame stability was examined for different amount of hydrogen addition to the methane fuel, different combustion air flow rates and swirl strengths by comparing equivalence ratio at the lean flame limit. The hydrogen addition effects and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using gas analyzers, and OH chemiluminescence techniques to provide information about species concentration of emission gases and flowfield. The results of NOx and CO emissions were compared with a diffusion flame type combustor. The results show that the lean stability limit depends on the amount of hydrogen addition and the swirl intensity. The lean stability limit is extended by hydrogen addition, and is reduced for higher swirl intensity at lower equivalence ratio. The addition of hydrogen increases the NOx emission, however, this effect can be reduced by increasing either the excess air or swirl intensity. The NOx emission of hydrogen enriched methane premixed flame was lower than the corresponding diffusion flame under the fuel lean condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.75-81
• /
• 2012

Autoignited lifted flames in laminar jets with hydrogen-enriched methane fuels have been investigated experimentally in heated coflow air. The results showed that the autoignited lifted flame of the methane/hydrogen mixture, which had an initial temperature over 920 K, the threshold temperature for autoignition in methane jets, exhibited features typical of either a tribrachial edge or mild combustion depending on fuel mole fraction and the liftoff height increased with jet velocity. The liftoff height in the hydrogen-assisted autoignition regime was dependent on the square of the adiabatic ignition delay time for the addition of small amounts of hydrogen, as was the case for pure methane jets. When the initial temperature was below 920 K, where the methane fuel did not show autoignition behavior, the flame was autoignited by the addition of hydrogen, which is an ignition improver. The liftoff height demonstrated a unique feature in that it decreased nonlinearly as the jet velocity increased. The differential diffusion of hydrogen is expected to play a crucial role in the decrease in the liftoff height with increasing jet velocity.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.89-94
• /
• 2016

The number of camping population and sites are rapidly increasing with to the expansion of camping culture and the advancement of leisure culture. It is necessary to develop an effective strategy of safety management, as a lot of accidents occur due to the increase of population and sites for camping. Particular attention needs to be paid for accident prevention in the increasing accidents of explosion awing to the overheating of bytane gas, and carbon monoxide poisoning due to the use of non-ventilated areas. In this study, the direction of safety management strategy is analyzed by a survey and analysis of risk factors in campsite about gas facilities and gas appliances in camp site. Accordingly, some directions are suggested. Conclusively, it is expected that the results of this study could help to improve efficiency management for camping.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.48-56
• /
• 2016

A crude oil leakage from a large atmospheric storage tank occurred on 4 April 2014 at 14:50 in Ulsan City, while storing the crude oil in the tank. Emergency Rescue Control Group was deployed in the scene. The company, Fire Service Headquarters and associated agencies got together in Command Post (CP) for discussing an effective corresponding strategy. Many solution plans were drafted in the debate such as power down, stopping the facilities, checking the density of inflammable gas, suppressing oil evaporation, moving the leaked crude oil to a nearby tank and a processing plant and avoiding marine pollution. All the solutions were carried out in cooperation with several agencies and partners. The oil leakage accident was successfully settled up within the process of responding, The Fire Service Headquarters and the company thought that the most important thing was the suppression of oil evaporation and the elimination of ignition source. With Fire Service Headquarters and several agencies' every effort, an explosion and a fire didn't occurred in the scene. This study suggest the improvement of the operating system in Emergency Rescue Control Group in case of petroleum leakage, explosion and fire accidents of atmospheric storage tank, different from a ordinary disaster. Assuming that petroleum leakage in atmospheric storage tank develop the explosion and fire accidents, the spreading speed of the flame and the burning time was experimented and compared with each other. Furthermore, this study concentrates on the effective field response plan prepared for the afterward explosion and fire accidents from petroleum leak in a storage tank, with the database experimented and analyzed in accordance with the angle of radiation in the foam nozzle and the pressure of pumping in a fire engine.

• Journal of Radiation Protection and Research
• /
• v.17 no.2
• /
• pp.25-35
• /
• 1992

To evaluate tritium level in some environmental samples, tissue-free water tritium (TFWT) and tissue-bound tritium (TBT) were analyzed in rices, chinese cabbages and pine needles collected at 12 locations in Korea. The TFWT was recovered by freeze-drying of the samples and the TBT was obtained in the form of water by combustion of the dried samples. Tritium was measured by liquid scintillation counter. The concentrations of TFWT were in the range of $0.96{\sim}3.96 Bq/1,\; 0.83{\sim}3.40 Bq/1\;and\;1.02{\sim}3.01 Bq/1$ in rices, chinese cabbages and pine needles, respectively. The mean specific activity ratios (TBT/TFWT) were 0.94, 1.71 and 1.39 in rices, chinese cabbages and pine needles, respectiviely. This excess TBT in the samples may be attributed to the fact that the residence time of TBT in the plant is longer than that of TFWT. The specific activity ratio depends on the plant species, the exposed time to tritiated atmosphere, atmospheric moisture, temperature and diffusion factor.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.639-645
• /
• 2009

In this study, alkanolamine was used to achieve high absorption rates for $CO_2$ as suggested at several literatures. The absorption rates of aqueous AMP and MEA solutions with $CO_2$, $SO_2$, $NO_2$ were measured using a stirredcell reactor. The reaction rate constants were determined from the measured absorption rates. The performances were evaluated under various operating conditions. As a result, the reactions with $SO_2$, $NO_2$ into aqueous AMP and MEA solutions were classified as an instantaneous reaction respectively. The absorption rates increased with increase of the reaction temperature and the concentration of absorbents. The simultaneous absorption rate of $CO_2/SO_2/NO_2$ into 3, 5, 10 wt.% MEA at various pressure of $CO_2/SO_2/NO_2$, was more increased 14~20% than AMP solution. We investigated the effect of $SO_2$ and $NO_2$ on the simultaneous absorption of $CO_2/SO_2/NO_2$ from a flue gas. The performances were evaluated under various operating conditions in order to investigate the absorption characteristic.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.909-916
• /
• 2015

In this study, to investigate the effect of spray behavior characteristics, we induce the mixing ratio of emulsified fuel using impinging spray. We formulate the emulsified fuel by mixing diesel and hydrogen peroxide($H_2O_2$). We set the temperature of the heating plate to $150^{\circ}C$, $200^{\circ}C$, and $250^{\circ}C$, and set the injection pressures to 400, 600, 800, and 1000bar. The surfactants for the emulsified fuel mixture, which were mixed span80 and tween80 was mixed as 9:1, were fixed to 3% of the total volume of the emulsified fuel. We set the mixing ratio of $H_2O_2$ in the emulsified fuel as emulsified fuel(EF)0, EF2, EF12, and EF22. Further, we visualize the evaporation impinging spray using the Schlieren method. Based on the results of this study, we found that a higher temperature and injection pressure of the heating plate impingement led to the active diffusion of the fuel vapor, which promoted emulsified fuel evaporation. When the emulsified fuel is utilized in an actual engine, because of the temperature-drop effect of the combustion chamber, which is due to the evaporation of $H_2O_2$ in fuel and faster mixture formation is expected to decrease the engine emissions.

• Journal of the Korean earth science society
• /
• v.36 no.4
• /
• pp.301-314
• /
• 2015

The purpose of this study was to investigate the impact of ground-based glaciogenic seeding on orographic clouds in the Daegwallyeong area on 13 March, 2013. The experiments was conducted by releasing silver iodide (AgI) under following conditions: surface temperature below $-4^{\circ}C$, wind direction between 45 and $130^{\circ}$, and wind speed less than $5ms^{-1}$. Two seeding rates, $38gh^{-1}$ (SR1) and $113gh^{-1}$ (SR2), were tested to obtain an appropriate AgI ratio for snowfall enhancement in the Daegwallyeong area. Numerical simulations were carried out by using the WRF (Weather Research and Forecast) model with AgI point-source module which predicted dispersion fields of AgI particles. The results indicated that the target orographic clouds contained adequate amount of supercooled liquid water and that the dispersion of AgI particles tended to move along the prevailing wind direction. To validate the seeding effects, the observation data from FM-120 and MPS as well as PARSIVEL disdrometer were analyzed. In this case study, glaciogenic seeding significantly increased the concentration of small ice particles below 1 mm in diameter. The observation results suggest that SR1 seeding be reasonable to use the ground-based seeding in the Daegwallyeong area.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.999-1005
• /
• 1996

Pt catalyst on carbon black was prepared by colloidal method, ion exchanging method and methanol reducing method. The colloidal method has been used generally. At ion exchanging method, $H^+$ of functional group on carbon surface made by oxidation treatment was exchanged with Pt ion. At methanol reducing method, Pt was impregnated on carbon to reduce by methanol contained with surfactants. With TEM and XRD, Pt particle size impregnated on carbon by various methods was $30{\sim}50{\AA}$. Loading yield was about 100%, loading yield of ion exchanging method was 99.92% by DCP analysis and 99.87% by combustion method. Within 60 hour, current density of oxygen reduction was $460mA/cm^2$ at 0.7V(vs. RHE) at colloidal method. It was the better performance than catalyst prepared by ion exchanging, methanol reducing method. But, it was shown some decrease of performance for long operation time(after 100hour), catalyst prepared by methanol reducing method was shown stable performance.