• The Journal of Engineering Geology
• /
• v.23 no.2
• /
• pp.127-136
• /
• 2013

We analyzed the patent trends for whole drilling bits to reveal the main R&D directions, focusing on patents applied for and registered in Korea, the USA, Japan, and Europe. The technology was classified into two groups as a primary classification step (reaming systems and fixed systems), and into seven groups as a secondary classification step (sliding, odex, horizontal pivot, vertical pivot, concentric, eccentric, and etc.). A total of 33,614 patents were retrieved and 870 patents were selected for final effective analysis by data deduplication and filtering. A portfolio analysis using the correlation between the number of patents and the applicants for each patents revealed a sliding system as the key technology with greatest growth potential. From an analysis of the barriers to patents being granted, we emphasize the need to avoid similar topics existing patents or patent applications and to develop differential technology.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.7
• /
• pp.5-10
• /
• 2009

The ground anchor is not usually used in soft clay and loose sand, because the pullout resistance of anchors can not be guaranteed. However, there is a method to increase the capacity of anchors using electric discharge geotechnical technologies, which are also known as pulse discharge and electric-spark technologies. The pulse-discharge anchor has a bulbed (or underreamed) bond length that is expanded by high voltage electrokinetic pulse energy. 24 anchors were installed in the weathered soil and sandy clay at the Geotechnical Experimentation Site at Sungkyunkwan University in Suwon, Korea. In this study, in order to define a relation between expansion rate of the anchor diameter and ultimate load, anchor load tests were carried out in accordance with testing procedures by AASHTO (AASHTO 1990) and FHWA (Weatheb 1998). And then several anchors were exhumed to measure the diameter of the pulse discharge anchors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.259-266
• /
• 2020

In this study, required drill bits and excavation methods were developed for an uneven drilling method that can solve the problem of performance degradation of rock bolts. The developed drill bit's excavation performance was verified using rock with a strength of 100 MPa or more. In addition, for the relative evaluation of the uneven excavation method, experimental specimens were prepared for models with and without irregularities, and tests were performed. As a result of the experiment, the model with unevenness exhibited an average critical draw resistance of 801.6 kN, which is about 1.7 times the value of 468.7 kN for the model without unevenness, thus confirming the effect sufficiently. Therefore, it is expected that the resistance performance will significantly increase despite an increase in the uneven hole diameter of 20 mm. In the future, the results of this study could be used as basic data when performing other studies using numerical analysis models and performance verification through experiments to obtain an optimized rock forming method.