• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.631-635
• /
• 2011

Spherical and non-spherical silica particles prepared by the direct oxidation were studied for the effect of the particle size and shape of these particles on oxide CMP removal rate. Spherical silica particles, which have 10~100 nm in size, were prepared by the direct oxidation process from silicon in the presence of alkali catalyst. The 10 nm silica particles were aggregated by addition of an acid, an alcohol, or a silane as an aggregation inducer between the particles. Two or more aggregated silica particles were used as a seed to grow non spherical silica particles in the direct oxidation process of silicon in the presence of alkali catalyst. The oxide removal rate of spherical silica particles increased with increasing an average particle size for spherical silica abrasives in the oxide CMP. It further increased non-spherical particles, compared with the spherical particles in the similar average particle size.

• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.217-223
• /
• 1990

This study was undertaken to find out the changes of chemically modified egg albumen grl after heat treatment at $95^{\circ}C$ for 30 minutes or at $120^{\circ}C$ for 30 minutes. Acetylation and succinylation increased the hardness of egg albumen gel, it was rather higher at high heat treatment($120^{\circ}C$, 30min.) than at low heat treatment($95^{\circ}C$, 30min). The cohesiveness of egg albumen gel was improved remarkably by succinylation and maleylation at both low and high heat treatment. The lightness and yellowness of egg albumen gel were decreased by chemical modification. Initial heat denaturation temperature of egg albumen was increased by 11$^{\circ}C$ by acetylation, by $12.5^{\circ}C$ by maleylation and by ,$14.5^{\circ}C$ by succinylation.

• Membrane Journal
• /
• v.9 no.3
• /
• pp.178-184
• /
• 1999

A periodic backflushing was performed to reduce the membrane fouling of ultrafiltration for wastewater, and the effect and the optimum condition were investigated in this study. The alumina¬ceramic tubular membrane with pore size of 0.02${\mu}m$ was used for the wastewater treated by coagulation and sedimentation from two paper plants, of which A plant made toilet paper by recycling milk paper cartons and B plant recycled corrugated cardboards. And the effect of periodic backflushing to membrane fouling and quality of permeate were studied with a constant backflushing time of 3 sec. As results of measuring SS, TDS, and COD of source and permeate, the rejection rate of SS showed the highest value at the backflushing period of 15 see, which was the shortest time in these experiments, in case of waste¬water discharged from A plant. However, the rejection rate of COD had the highest value at the period of 30 sec for wastewater from both A and B plant. Then, the rejection rate of TDS was almost same at 30 and 60 sec for A plant wastewater, and the highest at 60 see for B plant. The effect of periodic back¬flushing to membrane fouling was investigated by change of permeate flux according to operating time. The permeate flux decreased slowly at the operation with backflushing, and was higher compared with that without backflushing in both case of A and B wastewater. But, the optimum period with the highest flux of A wastewater was different from that of B, because SS and COD of A was higher than those of Band TDS of B was higher than that of A.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.295-305
• /
• 2003

This study aims to provide the physicochemical properties of three kinds of organo­smectites which can be diversely used in industries. Some properties of them were compared with Na­smectite. Three kinds of organo­smectites such as Hexadecyltrimethylammonium(HDTMA), Benzyldimethyltetradecylammonium(BDTDA), and Cetylpyridinium(CP) exchanged smectites were manufactured for this study. Three types of organo­smectites showed the alkaline character(pH 9), very low swelling property and viscosity, and a fast flocculation behavior because of strong hydrophobic property in contrast to hydrophilic Na­smectite. Three organo­smectites showed the strong interlayer expansion with basal spacing from $19\AA$ to $23\AA$ compared with the Na­smectite of about 12 $\AA$. Organic cations such as HDTMA, BDTDA, and CP exchanged into smectite were completely decomposed in the temperature range from $250^{\circ}C$ to $400^{\circ}C$. Generally, three organo­smectites showed the similar mineralogical, physicochemical and thermal properties. But their properties are quite different from Na­smectite. Considering economically, CP exchanged smectite would be used for the diverse utilization field in the future time.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.194-199
• /
• 2005

The principle of vortex cyclone was applied to enhance the treatment efficiency of waste air streams containing particulate matters, phenol, and others. Adsorption, condensation, and/or coagulation could be induced at low temperature zone formed by Joule-Thomson expansion as the pressurized air and pulverized activated carbon were introduced at the tangential direction into the cyclone system applied with the coaxial funnel tube of vortex cyclone. Easily condensible vapors were adsorbed and/or condensed forcibly on coagulated or condensed materials which were formed as cores for coagulation or condensation by themselves or on pulverized activated carbons. These types of coagulation or condensation rates were rapidly promoted by increase in their diameter. The maximum removal efficiency obtained from this experiment for the removal of carbon dioxide and phenol was about 87.3 and 93.8 percent, respectively. Phenol removal efficiency was increased with the relative humidities and enhanced by pulverized activated carbon added. The Joule-Thomson coefficients were increased with the pressure of air injected in the range of the relative humidities between 10% and 50%. It is believed that the moisture, particulate matters, and the pressure of the process air introduced could control the removal efficiency of VOCs.

• Clean Technology
• /
• v.16 no.2
• /
• pp.124-131
• /
• 2010

Effects of $Ca(OH)_2$ concentration (0.16~0.64 wt%), surfactant concentration (2~16 wt%), total volumetric flow rate (3~6 L/min) and $CO_2$ volume fraction $(0.3{\sim}0.6)$ on morphology, crystal structure, mean particle diameter, aggregation and specific surface area of the precipitated $CaCO_3$ were investigated in the slurry bubble column reactor. Experiments were carried out in acrylic reactor ($0.11\;m-ID{\times}1.0\;m-high$) with a internal tube ($0.04\;m-ID{\times}1.0\;m-high$h). The reaction time of $CaCO_3$ synthesis decreased with adding Dispex N40 of the anionic surfactant. The reaction rate of $Ca(OH)_2$ increased with increasing the volumetric flow rate of $CO_2$. From SEM images, the single crystal of $CaCO_3$ increased with increasing the reaction rate in the saturated concentration of $Ca(OH)_2$ (0.16 wt %) and the concentration of Dispex N40 (2 wt%). The mean particle size of $CaCO_3$ varied with adding Dispex N40. In addition, the specific surface area of $CaCO_3$ increased with adding of surfactant (2 wt%) from $35m^2/g$ to $44m^2/g$ at the volumetric flow rate of $CO_2$ (0.9 L/min) and the concentration of $Ca(OH)_2$(0.64 wt %).

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.964-968
• /
• 1997

Si(001)기판 위에 형성시킨 Zr-silicide의 전기적, 물리적 특성에 관한 연구를 하였다. Zr 박막은 전자빔 증착기를 사용하여 증착하였으며, 50$0^{\circ}C$ 열처리하여 Zr-silicide를 형성시켰다. 각 온도에서 열처리된 Zr-silicide시편의 상형성, 전기적 특성, 화학적 조성, 표면 및 계면 형상을 XRD, four-point probe, AES, TEM과 HRTEM으로 분석하였다. 분석 결과 $600^{\circ}C$부터 Zr과 Si기판의 계면에서 C49 ZrSi$_{2}$의 생성이 관찰되었다. Zr-Silicide박막의 비저항은 C49 ZrSi$_{2}$의 형성에 영향을 받는 것으로 관찰되었으며, 50$0^{\circ}C$ 열처리 후에는 184.3 $\mu$Ω-cm로 낮아졌으며, C49 ZrSi$_{2}$가 박막에 완전히 형성된 80$0^{\circ}C$ 열처리 후에는 32$\mu$Ω-cm의 낮은 저항을 나타내었다. 형성된 C49 ZrSi$_{2}$박막은 균질한 화학적 조성을 하고 있음을 AES 분석으로 확인하였다. Zr-silicide의 표면 및 계면의 형상을 TEM과 HRTEM으로 관찰하였으며, $600^{\circ}C$ 열처리 후에 계면에서 ZrSi$_{2}$의 상형성이 시작되는 것을 관찰하였다. 80$0^{\circ}C$ 열처리 후에도 계면과 표면형상은 비교적 균질한 형상이 유지되었음이 관찰되었으며, 이는 C49 ZrSi$_{2}$가 높은 온도에서도 잘 응집되지 않으며 고온 안정성을 가지는 재료임이 관찰되었다.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.164-168
• /
• 2008

CaWO4 crystals were synthesized by a microemulsion method. Various sizes and shapes of CaWO4 were obtained by changing the molar ratio (w) of H2O to CTAB. At w=5 and 10, oval CaWO4 crystals with length of 100 nm and 500 nm were obtained, respectively. At w=20, rod-like CaWO4 crystal with length of 1 μm was obtained. The sphere CaWO4 crystal with length of about 2~3 μm was obtained at w=30. The CaWO4 crystal morphology changes from oval to sphere via a rod by aggregation with increasing the molar ratio of H2O to CTAB.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.9-16
• /
• 1997

Cut-off methods of controlling leachate migration from waste landfills and contaminated sites are studied. Permeability and chemical compatibility tests are prrforlned on slurry wall materials including soil-bentonite, cement-bentonite, cement / fly ash-bentonite, plastic concrete. Hydraulic conductivity of soil-bentonite mixture is the lowest of these four bacuill materials. The leachate from municipal solid waste has little influence on the permeability of the backfill materials. The bentonite slurry becomes flocculated and aggregated when exposed to the leachate. The results of the permeability test showed that the hydraulic conductivities of the backfill materials are in the order soil-beiltonite, Plastic concrete, cement-bentonite. And the result c: the compatibility test showed increase in permeability due to the effects of leachate. Thus, in designing the slurry wall it is essential to check the behaviour of the bentonite slurry and backfill materials on the compatibility with the contaminants.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.224-232
• /
• 1983

The effects of ball-milling time on solid state reactions in the system $BaCO_3-Fe_2O_3$ and the magnetic properties of Ba-ferrite 4(BaFe_{12}O_{19})$ have been studied. $BaCO_3-Fe_2O_3 $mixtures were prepared by ball-milling for varying lengths of time; 5, 15, 30, 80 and 200 hours. Techniques employed were thermogravimetry, X-ray diffraction analysis, scanning electron microscopy and B-H curve tracer. It is shown that the aggregation states and superparamagnetic size fractions obtained by increasing ball-milling time have remarkable effects on solid state reactions and magnetic properties of Ba-ferrite.