• Journal of Food Hygiene and Safety
• /
• v.36 no.3
• /
• pp.228-238
• /
• 2021

The aim of this research was to develop a rapid and easy multi-residue method for determining dimethipin, omethoate, dimethipin, chlorfenvinphos and azinphos-methyl in agricultural products (hulled rice, potato, soybean, mandarin and green pepper). Samples were prepared using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) and analyzed using gas chromatography-tandem mass spectrometry (GC-MS/MS). Residual pesticides were extracted with 1% acetic acid in acetonitrile followed by addition of anhydrous magnesium sulfate (MgSO₄) and anhydrous sodium acetate. The extracts were cleaned up using MgSO₄, primary secondary amine (PSA) and octadecyl (C₁₈). The linearity of the calibration curves, which waas excellent by matrix-matched standards, ranged from 0.005 mg/kg to 0.3 mg/kg and yielded the coefficients of determination (R²) ≥ 0.9934 for all analytes. Average recoveries spiked at three levels (0.01, 0.1, 0.5 mg/kg) and were in the range of 74.2-119.3%, while standard deviation values were less than 14.6%, which is below the Codex guideline (CODEX CAC/GL 40).

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• Journal of Life Science
• /
• v.31 no.6
• /
• pp.559-567
• /
• 2021

This study compared the nutritional characteristics and antioxidant effects of sea mustards sourced from five different areas (Barammaegi, Gultongmeori, Chanmulgae, Johongtaek, and Goraedeung) in Taejongdae, Youngdo, Busan. The contents of total flavonoids and phenols and fatty acid composition were measured. To evaluate their antioxidant effects, 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays were used. Acetone/methylene chloride (A+M) extracts from all the sea mustards contained higher amounts of total flavonoids and phenols than methanol (MeOH) extracts. Among the sea mustards obtained from the different areas, the total flavonoid and total phenolic content of the A+M extract of the sea mustard from Gultongmeori was 1.44±0.04 mg/g and 1.72±0.06 mg/g, respectively. In terms of the fatty acid composition, the Gultongmeori sea mustard had higher percentages of total n-6, total n-3, eicosapentaenoic acid (EPA, 20:5n-3), and docosahexaenoic acid (DHA, 22:6n-3) than the sea mustards from the other areas. The A+M extract of the sea mustard from Gultongmeori was more effective in terms of scavenging free radicals as compared with that of the other sea mustards, as assessed by the DPPH and ABTS assays (p<0.05). In a 120-minute reactive oxygen species (ROS) production assay, all the extracts tested decreased cellular ROS production induced by H₂O₂ compared to that produced by exposure to an extract-free control (p<0.05). The extracts from Barammaegi and Gultongmeori had a greater inhibitory effect on cellular ROS production. These results indicated that the antioxidant effects of sea mustards might be associated with a higher amount of flavonoids and phenols. This study suggests that food-processed products from sea mustard can be developed as functional foods for promoting health in the local population.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.2
• /
• pp.110-123
• /
• 2021

We investigated geochemical constituents of pore-water and sediment, rates of organic carbon (C_org) oxidation and sulfate reduction (SR), and benthic nutrient flux (BNF) to elucidate characteristic of C_org oxidation and its control in the coastal area near Lake Shihwa. The study sites were selected in the vicinity of Soraepogu (E0), Songdo tidalflat (E1) and Oido dock (E3) and in front of floodgate Shihwa tidal plant (E5). The C_org contents in the sediments and concentrations of ammonium and phosphate in pore water exhibited the highest value at EO, and gradually decreased toward the outer sea (E1, E3, E5). Rates of anaerobic C_org oxidation (260.6 mmol C m^-2 d^-1) and SR (91.4 mmol S m^-2 d^-1) at E0 were 4-9 and 6-54 times higher than at the site of outer sea (E1, E3, E5). Rates of SR at E3 and E5 accounted for 11-23% of anaerobic C_org oxidation, whereas it comprised 47-70% of anaerobic C_org oxidation at E0 and E1. Rates of C_org oxidation and SR showed a highly positive correlation with the concentration of dissolved organic carbon (r² = 0.795 and 0.777, respectively). The BNF at E0, E1, and E3 accounted for 120-510% and 26-178%, respectively, of the N and P required for primary production in the water column. Overall results suggest that the C_org oxidation in the sediment controlled by concentration of dissolved organic carbon in the pore water and the excessive C_org oxidation stimulates the benthic nutrient flux, which may cause a phytoplankton bloom in the water column.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2004.10a
• /
• pp.17-58
• /
• 2004

뉴저지주 보건교육/건강 증진정책을 논하기전에 건강증진과 보건 교육사의 뜻을 먼저 기술하기로 한다. 건강증진이란 일상 사회생활과 행동과학의 응용에서 시작하며 교육의 효율적 작전 및 기술, 질병 역학 조사, 개인 및 가족단위 건강 위해 행위 절감, 사회연관 구축망 조성, 그리고 적게는 이웃, 더 나아가 조직체계 및 지역 사회의 네트웍 실시등을 실시한다. 보건교육 및 건강증진 전문가란 ' 전국 보건교육 인증 위원회(NCHEC) ' 에서 채택된 다음 7개 활동 영역에서 개인적, 그룹, 각주단위, 그리고 범 국가적 조직에서 종사하는자로 한다. 개인 및 지역사회 보건 교육 필요성 분석- 계회, 실행, 효율성 평가, 사업 진행 조정, 자문, 컴뮤니케이션 등의 활동범위를 들 수 있다. 공인 보건 교육사(CHES)란 대학 및 대학원에서 보건 교육학 소정의 필수 과목을 이수하고 학.석사 소지자로서 ' 전국 보건 교육 인증 위원회 ' 에서 그 자격을 인정 받고 공인 자격 시험에 합격한자로 한다. 합격자는 자기 성명뒤에 CHES란 칭호를 부치며 매 5년마다 75단위이상 인정된 전문 직업 보수 교육을 받아야 한다. 보건 교육사 고용 분야는 연방, 주, 지방 정부의 보건 교육사(10-15%) 및 건강 증진 전문가로 종사하며; 이들은 지역 사회 조직화, 프로그람 기획, 공공사업 마켓팅, 메디아, 컴뮤니케이션 자질을 갓추어야 하며; 상해 예방, 학교 보건, 지역 사회 영양 실태 향상, 그 외 모든 건강 증진과 질병 예방에 일익을 담당 하여; 의사, 간호사, 약사, 영양사,환경 위생사드의 전문분야종사자들괴 한팀이 되어 지역 사회 보건 사업에 기여한다. 쥬저지 보건 교육사들은 주법령 8조 '||'&'||' 보건행정 표준 시행령 ' 에 따라 포괄적 보건교육/건강증진 프로그램을 개발하여 총체적으로 조절 관장한다. 특희 ' 미국 학술원 의료 연구원 ' 에서 제정한 ' 10대 필수 공중 보건 사업 ' 에 기준을 두고; 1) 개인 및 지역사회 필수 보건 여건 분석 평가, 2) 보건 교육 이론에 따른 사업 계획 설정, 3) 교육 전략과 보건문제 발굴에 따라 일반 대중 대상 보건 교육 실행 (프로그람 기획, 연수 교육, 미디어 캠페인, 공중보건 향상책 옹호), 4) 사업 진행 과정 정리, 그 결과에 대한 영향력과 결과 평가, 5) 프로그램진행, 인사 및 예산관리 참여, 6) 근무향상을 위한 보수교육 프로그램 개발, 7) 보건 의료 업무 종사자 상호 협조성 향상 훈련, 8) 지역 사회자원 밭굴, 9) 적절한 고객 의뢰 체제 시행, 10) 위기 관리 컴뮤니케이션 체제 개발실시, 11) 일반 대중에게 공중 보건 향상 고취, 12) 각종 협력 지원금 신청서 작성 제출, 13) 문화/인종적으로 적절한 시청각 교재 발굴, 15) 질적 및 양적 보건교육/건겅증진책 연구 실시, 16) 비 보험 가담자, 저 보험자, 빈곤자, 이민자 색출 선도, 17) 관활 구역내 상재하는 각 건강증진 프로그램 밝혀 내서 불필요한 중복 회피등이다. 그 외에도 보건 교육사들은 사회 복지 단체인 미국 암 협회, 미국 심장 협회,미국 폐장 협회 등 각종 사회 복지 비영리단체 와 자선 사업 단체들과 긴밀희 협조하거나 그 단체 임직원으로서 건강 증진 사업에 종사한다. 병원 및 의료기관에선 임직원 보수 교육, 환자의 질병 예방및 건강증진 교육, 그리고 의료 사업장내 건장 증진업무에 종사한다. 건강 유지 의료 기관(HMO)에선 예방주사, 정기검진 촉진등을 통한 입원일수 절감, 응급실 사용도 절감등으로 의료비 감축, 삶의질 향상상에 종사한다. 사업장 보건 교육사는 스트레스 관리, 금연 및 흡연 중단선도, 체중 절감, 종업원 건강증진 생활화참여 유치, 컴뮤니케이션 개발, 마켓팅, 질병 예방등에 그 전문 직업적 노하우를 사업체 건강 증진 프로그램 개발에 접목한다. 뉴저지 2010년대 건강 증진책은 5대 목표 설정하여 현재 시행하고 있다. 특이한점은 2001년 9.11사태 이후 연방정부와 주정부의 상당한 예산 지원을 그랜트 지원금 형식으로 받아 연방, 주정부, 지방 정부, 의료 기관등에서 일사 불란하게 생물/화학/방사성 테러에 대비하는데 보건 교육사들은 시민 인지도 향상과 위기관리 컴뮤니케이션 영역에서 활약한다. 총체적인 보건 교육/건강 증진책은 다음 천년간 뉴저지 건강증진 백서와 미연방 정부 건강증진 2010에 준하여 설립한 뉴저지 건강 증진 2010 에 의한다. 그 모델을 보면; 1) 생활 습관 향상으로 위해 행위 절제; 적절한 영양 섭취 와 과체중화 차단 불필요한 투약 절제와 그 관리 흡연 탐익 절감, 금연, 흡연관련 신체/정신적 피해 관리/치료 습관성 약물 중독 조기발견 예방 낙상 예방 폭력, 의도적/비의도적 상해 예방 2) 심장질환, 암, 뇌졸중, 당뇨, 폐염, 인프루엔자등 주사망원인 질병 조기 발견 예방 책 마련; 독감.폐렴 예방 주사 실시 3) 보건 교육 대상과 표적 설정 특히 보건사업 참여 동반자 발굴하여 그 동참과 책임분담 책려; 주. 지방 정부기관, 의료 종사자, 의료 보험 업자, 대학 등 교육 기관, 연구 기관, 교육자, 지방 보건소, 지역 사회 비 영리단체, 종교 단체 및 교역자 등의 참여 촉구., 지역 사회 비 영리단체, 종교 단체 및 교역자 등의 참여 촉구.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.145-158
• /
• 2023

Constructed wetlands (CWs) are effective technologies for urban wastewater management, utilizing natural physico-chemical and biological processes to remove pollutants. This study employed a bibliometric analysis approach to investigate the progress and future research trends in the field of CWs. A comprehensive review of 100 most-recently published and open-access articles was performed to analyze the performance of CWs in treating wastewater. Spain, China, Italy, and the United States were among the most productive countries in terms of the number of published papers. The most frequently used keywords in publications include water quality (n=19), phytoremediation (n=13), stormwater (n=11), and phosphorus (n=11), suggesting that the efficiency of CWs in improving water quality and removal of nutrients were widely investigated. Among the different types of CWs reviewed, hybrid CWs exhibited the highest removal efficiencies for BOD (88.67%) and TSS (95.67%), whereas VSSF, and HSSF systems also showed high TSS removal efficiencies (83.25%, and 78.83% respectively). VSSF wetland displayed the highest COD removal efficiency (71.82%). Generally, physical processes (e.g., sedimentation, filtration, adsorption) and biological mechanisms (i.e., biodegradation) contributed to the high removal efficiency of TSS, BOD, and COD in CW systems. The hybrid CW system demonstrated highest TN removal efficiency (60.78%) by integrating multiple treatment processes, including aerobic and anaerobic conditions, various vegetation types, and different media configurations, which enhanced microbial activity and allowed for comprehensive nitrogen compound removal. The FWS system showed the highest TP removal efficiency (54.50%) due to combined process of settling sediment-bound phosphorus and plant uptake. Phragmites, Cyperus, Iris, and Typha were commonly used in CWs due to their superior phytoremediation capabilities. The study emphasized the potential of CWs as sustainable alternatives for wastewater management, particularly in urban areas.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.302-311
• /
• 2023

This study was conducted to evaluate the applicability of castor oil (CSO) as a natural wood preservative. CSO was treated into wood blocks prepared with domestic and imported wood species using a vacuum-pressure method, and then treatability, leachability and decay resistance of the CSO-treated wood blocks were examined. Although CSO was penetrated effectively into wood blocks of all wood species, the CSO-treatability was the highest in Western hemlock, followed by Japanese larch (LA), soft maple and Mongolian oak due to the difference of its anatomical structure. Except for LA, the more retained, the more leached during a saline water-immersing process for 48h. The use of ethanol added to reduce the viscosity of CSO affected negatively the treatability and leachability of wood blocks. Decay resistance, which was evaluated by the weight loss of wood blocks exposed against Fomitopsis palustris (FOP) and Trametes versicolor, of the CSO-treated/leached wood blocks was superior to that of control. Especially, most of wood blocks treated with preserving solution composed of only CSO (CSO-2) did not decayed and showed a very low weight loss against FOP. The decay resistance results from CSO retained in wood blocks after leaching. The retention of CSO could identify using the observation of X-ray microscope. Length of wood strips, which were treated with CSO-2 and then immersed in saline water for 2 weeks, hardly changed in all cutting directions. In addition, weight gain and length-swelling rate of the wood strips were extremely low compared to those of control. These results indicate that moisture resistance of the wood strips was improved by the CSO treatment. It is concluded that the treatment of CSO using a vacuum-pressure method provides the decay resistance and dimensional stability of wood, and thus CSO can be used as a natural wood preservative on various indoor and outdoor circumstances.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.491-501
• /
• 2022

Bentonite has been proposed as a buffer and backfill material for high-level radioactive waste repository. Under such repository environment conditions, bentonite is subjected to combined thermal, hydrological, mechanical, and chemical processes. This study evaluates the feasibility of applying X-ray CT technology on the characterization of bentonite under hydration conditions using a newly developed testing cell. The cylindrical cell is made of platic material, with a removable cap to place the sample, enabling to apply vertical pressure on the sample and to measure swelling pressure. The hydration test was carried out with a sample made of Gyeonju bentonite, with a dry density of 1.4 g/cm³, and a water content of 20%. The sample had a diameter of 27.5 mm and a height of 34 mm. During the test, water was injected at a constant pressure of 0.207 MPa, and lasted for 7 days. After one day of hydration, bentonite swelled and filled out the space inside the cell. Moreover, CT histograms showed how the hydration process induced an initial increase and later progressive decrease on the density of the sample. Detailed profiles of the mean CT value, CT standard deviation, and CT gradient provided more details on the hydration process of the sample and showed how the bottom and top regions exhibited a decrease on density while the middle region showed an increase, especially during the first two days of hydration. Later, the differences in CT values with respect to the initial state decreased, and were small at the end of testing. The formation and later reduction of cracks was also characterized through CT scanning.

• Conservation Science in Museum
• /
• v.29
• /
• pp.133-152
• /
• 2023

This study references preceding studies to examine the history of paint application techniques using various paints in the past, with the aim to contribute to the long-term preservation of large military cultural heritage assets situated outdoors. To this end, the study compared the findings of preceding research with the findings of an analysis conducted on a H-13 helicopter housed at the War Memorial of Korea. Upon collecting and analyzing samples from three grounded WWII aircraft from above-ground by preceding studies, it was confirmed from each sample that the various chemical properties of chrome ensured the effectiveness of the protective coating. The compound was first tested as a corrosion-inhibiting pigment in the early 1940s and proved its excellent moisture-resistant properties over the course of 80 years, despite the deterioration of the paint layer and long-term exposure to the natural environment. For this reason, it has been widely used as a corrosion inhibitor for aluminum alloys in the aviation industry. In other word, the most widely-used material for preventing corrosion was an organic primer containing chromate. In this study, based on the paint analysis of a H-13 helicopter operated in the Korean War, it was shown that the second layer, consisting of the primer, contains chromium oxide (Cr₂O₃). In addition, it was estimated that red lead tetraoxide (Pb₃O₄) was used for the vehicle. Analysis results and data from previous studies can help to confirm the continued effectiveness of corrosion prevention function provided by chromate. Meanwhile, the result of infrared spectroscopy analysis confirmed the use of alkyd resin. In the future, comparisons with a more diverse range of artifacts will allow the identification of changes in the manufacturing technology of paints used to protect alloys from corrosion.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.535-543
• /
• 2006

Being used widely in semiconductor and display manufacturing, $NF_3$ is internationally considered as one of the regulated compounds in emission. Numerous companies have been continuously trying to reduce the emissions of $NF_3$ to comply with the global environmental regulation. This work is made to report the destruction and removal efficiency (DRE) of electrically heated scrubbers and the use rate in process chambers installed in three main LCD manufacturing companies in Korea. As the measurement techniques for $NF_3$ emission, mass flow controlled helium gas was continuously supplied into the equipment by which scrubber efficiency is being measured. The partial pressures of $NF_3$ and helium were accurately measured for each sample using a mass spectrometer, as it is emitted from inlet and outlet of the scrubber system. The results show that the DRE value for electrically heated scrubbers installed before 2004 is less than 52 %, while that for the new scrubbers modified based on measurement by scrubber manufacturer has been sigificentely improved upto more than 95 %. In additon, we have confirmed the efficiency depends on such variables as the inlet gas flow rate, water content, heater temperature, and preventative management period. The use rates of $NF_3$ in process chambers were also affected by the process type. The use rate of radio frequency source chambers, built in the $1^{st}$ and $2^{nd}$ generation process lines, was determined to be less than 75 %. In addition, that of remote plasma source chambers for the $3^{rd}$ generation was measured to be aboove 95 %. Therefore, the combined application of improved scrubber and the RPSC process chamber to the semiconductor and display process can reduce $NF_3$ emmision by 99.95 %. It is optimistic that the mission for the reduction of greenhouse gas emission can be realized in these LCD manufacturing companies in Korea.