• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.723-728
• /
• 2012

The production of biodiesel by transesterification of soybean oil was performed on $MoO_3$, $SnO_2$ and $CeO_2$ mixed oxides. The catalysts were characterized using XRD and $NH_3$-TPD. $MoO_3$ showed the highest activity among the three metal oxides. When 7 wt% of catalysts was introduced into the reactants, the highest activity was obtained and the water added to reactant decreased the catalytic activity. $MoO_3$ and $SnO_2$ mixed with 50:50 showed the highest activity and $CeO_2$ added with 20% on the $MoO_3-SnO_2$ mixed oxide also showed the highest activity. The catalytic activity showed to have a good relationship with the amount of acid site of catalysts. When the waste soybean oil was used as a reactant, the conversion was decreased about 30%.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.22-35
• /
• 2016

In this study CALPUFF modeling was performed to establish a correlation between regions of frequent civil odor complaints near Gumi national industrial complex and odor-emission facilities of synthetic fiber manufacturers in the same area as main acetaldehyde-emission point sources. As a result of the CALPUFF modeling, the maximum concentration of acetaldehyde in Gumi national industrial complex was reduced from O ($10^{-5}g/m^3$) to O ($10^{-6}g/m^3$) upon improving emission facilities of T company so that the maximum concentrations of acetaldehyde frequently appeared in complex 3. In addition, the predicted range of the maximum acetaldehyde concentration in Gumi national industrial complex was also improved in comparison with that prior to improving emission facilities of T company. These maximum concentrations of acetaldehyde obtained to estimate the expected contribution of total acetaldehyde point source by CALPUFF modeling showed the similar values to those measured in 'HAPs investigation in the region of Gumi-Daegu' and were consistent to the trend of civil odor complaints. Therefore, the expected contribution of total acetaldehyde point source was validated. The relative contribution of T company upon improving its emission facilities was predicted to be lowered by more than factor of two, compared to that prior to improving its emission facilities. To the contrary, the relative contribution of W company upon improving emission facilities of T company was predicted to be increased by more than factor of two, compared to that prior to improving emission facilities of T company. This indicates that the contribution of aldehyde point sources of W company was relatively increased upon improving emission facilities of T company.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.336-340
• /
• 2015

Three different types of polycarbonate (PC)/graphene oxide (GO) composites using diphenyl carbonate as a monomer were fabricated by melt polymerization. Those were the PC/GO composite (PC/GO) using a twin extruder, in-situ PC/GO composite (PC/GO-cat.) using a catalyst, and in-situ PC/GO composite (PC/GO-COCl) using a GO-COCl treated by -COCl, Chemical structures of the composites were confirmed by C-H and C=O stretching peak at $3000cm^{-1}$ and $1750cm^{-1}$, respectively. The slope for the storage (G') versus loss (G") modulus plot decreased with an increase in the heterogeneous property of polymer melts. So we can check the GO dispersion of the PC/GO composites using by the slop for G'-G" plot. According to the G'- G" slopes for three different types of PC/GO composites, GO was well dispersed within PC matrix in case of PC/GO and PC/GO-cat.. It was also confirmed by atomic force microscope (AFM) photos. One of the reasons for the poor GO dispersion of PC/GO-COCl is branching and crosslinking processes occurred during polymerization, which was further confirmed by a plot for the complex modulus versus phase difference.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.351-355
• /
• 2015

$Pd/TiO_2$ catalysts for aerobic benzyl alcohol oxidation were synthesized and eight different room temperature ionic liquids were used to control the palladium properties as active sites. $Pd/TiO_2$ particles were also calcined at 300, 400 and $500^{\circ}C$ to obtain an optimum catalyst. As the calcination temperature increased, the surface area and pore volume of catalyst decreased, but negligible changes were observed for the pore size of catalyst. However, the structural properties of catalyst varied with respect to the type of ionic liquids. Under identical reaction conditions, different catalytic activities were obtained depending upon the calcination temperature and type of ionic liquids. Mostly, the catalyst calcined at $400^{\circ}C$ showed higher catalytic activity than those at other temperatures. However, the catalyst prepared with 1-octyl-3-methylimidazolium hexafluorophosphate and 1-octyl-3-methylimidazolium trifluoromethanesulfonate showed good catalytic performance after calcination at $300^{\circ}C$. Among the catalyst, $Pd/TiO_2$ prepared with 1-octyl-3-methylimidazolium tetrafluoroborate and calcined at $400^{\circ}C$ showed the highest catalytic activity.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.603-608
• /
• 2015

Alumina powder have been expanded its application in industry and required to control its morphology such as powder size and aspect ratio of single particle. It can be synthesized by molten - salt method which is possible to obtain various shapes of ceramic particles by controlling the growth direction because each crystal face has different growth rate. In this study, various combinations of salts such as NaCl, $Na_2SO_4$, $Na_3PO_4$ and their mixture were used for control the growth of plate like alumina particle from the initial stage of synthesis because salt having different ionic strength can control the growth direction of ceramic particle under its melting condition around $800{\sim}900^{\circ}C$, and growth behavior of plate-like alumina particle with different reaction conditions such as temperature and concentration on the crystal size and shape was studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5179-5186
• /
• 2012

Miglitol, a well-known therapeutic intervention agents for diabetes, exhibits competitive inhibitory activity against ${\alpha}$-glucosidase and it is usually produced through three sequential steps including chemical and bioconversion processes. Gluconobactor oxydans (G. oxydans) belonging to acetic acid bacteria biologically, converts 1-deoxy-1-(2-hydroxyethylamino)-D-glucitol (P1) into a key intermidiate, 6-(2-hydroxyetyl) amino-6-deoxy-${\alpha}$-L-sorbofuranose (P2) by incomplete oxidation. In this study, we identified and optimized fermentation conditions of CK-2165, that was selected in soil samples by comparing the bioconversion yield. CK-2165 strain was found to be closely related to G. oxydans based on the result of phylogenetic analysis using 16S rDNA sequence. Utilization of API 20 kits revealed that this strain could use glucose, mannose, inositol, sorbitol, rhamnose, sucrose, melibiose, amygdalin and arabinose as carbon sources. The culture conditions were optimized for industrial production and several important factors affecting bioconversion rate were also tested using mycelial cake. Cell harvested at the late-stationary phase showed the highest bioconversion yield and $MgSO_4$ was critically required for the catalytic activity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.223.2-223.2
• /
• 2010

용융탄산염 연료전지(MCFC)는 $650^{\circ}C$에서 작동하는 고온형 연료전지 시스템이다. 이 시스템은 천연가스 등을 개질하여 생산된 수소를 바로 전기로 생산할 수 있는 시스템으로 열효율이 높으며, 현재 대체 발전시스템으로 각광을 받고 있다. MCFC는 개질방식에 따라 내부개질 방식과 외부개질 방식이 있다. 내부개질 방식은 수소를 생산하는 개질기가 스택내부에 장착된 형식으로 천연가스를 스택내부에서 개질하여 바로 전기를 생산하는 방식이다. 이 내부개질반응에 사용되는 촉매로는 알루미나에 담지된 니켈(Ni) 계열촉매이 주로 쓰이고 있다. 또한 내부개질촉매의 형태는 작은 원주형의 촉매형태로 성형되어 사용된다. 이 성형된 촉매의 크기가 바로 내부개질 스택의 크기를 결정하는 중요한 요소이다. 그래서 촉매의 크기는 되도록이면 작게 성형하는 것이 중요하다. 그러나 촉매의 크기가 너무 작으면 촉매를 성형하는데 큰 어려움이 생기게 된다. 본 연구에서는 니켈 촉매를 공침법이 아닌 균일용액침전법을 이용하여 제조하였으며, 이 촉매를 이용하여 지름이 약 2 mm 이하로 촉매를 압출성형하는 방법을 연구하였다. 먼저 요소(urea)를 이용한 균일용액침전법으로 촉매를 제조하였다. 최적의 촉매 합성조건을 살펴보기 위해서, 반응 온도를 80, 85, 90, 95, $100^{\circ}C$로 변화 시키면서 제조된 촉매의 특성을 살펴보았다. 그리고 촉매의 적절한 니켈 양을 알아보기 위해서 니켈의 양을 30, 40, 50, 60, 70 wt%로 변화 시켰으며, 조촉매로 사용되는 MgO 양을 5, 10, 15, 20 wt%로 변화 시켜서 제조된 촉매의 특성을 살펴보았다. 물성을 비교하기 위해서, X-선 회절분석(XRD) 및 TPR, 물리화학흡착을 하였다. 그 결과 침전반응온도가 $80^{\circ}C$에서 촉매가 가장 좋은 물성을 보였으며, 우수한 개질성능을 보였다. 그리고 촉매 활성물질인 니켈의 함량은 50 wt% 정도가 가장 적절한 함량이었으며, MgO의 함량이 15 wt%일 때 가장 우수한 물성과 개질 성능을 보여주었다. 이 촉매들은 공침법으로 제조된 상용촉매와 비교하였을 때, 보다 우수한 물성과 개질성능 보였다. 그래서 이 촉매를 균일침전법을 이용하여 대량으로 제조한 다음 압출성형 방법을 이용하여 촉매를 원주형으로 제조하였다. 먼저 제조된 촉매는 별도의 분쇄작업(볼밀 혹은 제트밀)을 거치지 않아도 입자사이즈가 약 $4{\mu}m$ 수준이 나오도록 촉매 제조조건을 조절 하였다. 그리고 소량의 Methyl cellulose(MC) 바이더와 물만 사용하여 촉매를 혼합한 다음 스크류 압출기를 이용하여 촉매를 성형하였다. 이 촉매는 지름이 약 2 mm 이하로 제조할 수 있었으며, 기계적 강도는 타정기로 성형한 상용촉매보다 우수하였다. 그리고 촉매 성능 또한 상용촉매와 비교하였을 때, 우수한 성능 보였다. MCFC용 내부개질 촉매로 균일용액침전법을 사용한 촉매가 적합하다고 판단되며, 압출성형에도 적합하다고 판단되었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.141-146
• /
• 2010

$LiFePO_4$ doped with Cr showed improved electrochemical properties as a cathode material of lithium-ion batteries compared to the undoped. The improvement was thought that the doping would raise the electronic conductivity of the compounds. The electrical conductivity of $LiFe_{0.965}Cr_{0.03}B_{0.005}PO_4$ and $LiFe_{0.965}Cr_{0.03}Al_{0.005}PO_4$ powder was measured in the temperature range from 30 to $80^{\circ}C$. The doped powders were synthesized via mechanochemical milling and subsequent heat treatment at 675~$750^{\circ}C$ for 5~10h. The doping enhanced grain growth and electrical conductivity. The electrical conductivity of the $LiFe_{0.965}Cr_{0.03}Al_{0.005}PO_4$ powder at $30^{\circ}C$ was $1{\times}10^{-8}S/cm$, which was higher two orders of magnitude than that of the undoped.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.665-670
• /
• 2016

This study deals with the possible degradation of toluene and acetic acid when subjected to cell-free enzyme system from the toluene degrading bacteria Pseudomonas putida and acetic acid degrading bacteria Cupriavidus necator. P. putida produces toluene dioxygenase only under the existence of toluene in culture medium and toluene is degraded to cis-toluene dihydrodiol by this enzyme. C. necator produces acetyl coenzyme A synthetase-1 and converts acetic acid to acetyl CoA in order to synthesize ATP to need for growth or PHA which is biodegradable polymer. In case of toluene degradation, the experiment was conducted before and after production of toluene dioxygenase as this enzyme, produced by P. putida, is an inducible enzyme. Toluene was detected using gas chromatography (GC). Similar amount of toluene was found in control group and before production of toluene dioxygenase (experimental group 1). However, reduction in toluene was detected after the production of toluene dioxygenase (experimental group 2). Acetic acid was detected through application of gas chromatography-mass spectrometer (GC-MS). The results showed the acetic acid peak was not detected in the experimental group to apply cell-free enzyme system. These results show that the cell-free enzyme system obtained from P. putida and C. necator retained the ability to degrade toluene and acetic acid. However, P. putida needs to produce the inducible enzyme before preparation of the cell-free enzyme system.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.530-534
• /
• 2011

The synthesis of dimethyl carbonate by liquid phase oxidative carbonylation of methanol was studied under batch reaction system. Reaction factors such as effect on various metals, anion containing in copper catalyst, temperature, carbon monoxide and oxygen molar ratio and copper content were investigated. In particular $CuCl_2{\cdot}2H_2O$ showed the excellent of the methanol conversion 65.2%, DMC selectivity 96.6% reaction condition under 1.0 g, $150^{\circ}C$, MeOH/CO/$O_2$=0.2/0.215/0.05 (molar ratio). $CuCl_2$ led to corrosion of the reactor. Thus, a new catalyst system using supports was investigated to resolve these corrosion problem. Influence on various supports were examined and copper catalyst supported on zeolite Y showed the most excellent activity on the formation of dimethyl carbonate. The amount of Fe dissolved during the reaction using ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometer) was compared with catalysts, calcined Cu/zeolite Y showed the lower value below 5% than $CuCl_2-2H_2O$.