• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.561-568
• /
• 2021

In this study, in order to observe the change in the amount of Tire and Road Wear Particles and the ratio of tire components in it according to the tire wear resistance performance, carried out the evaluation by varying the vulcanization reaction design of the tire tread rubber. In addition, in order to improve the reliability of the evaluation of Tire and Road Wear Particles, the evaluation was performed indoor laboratory test equipment that simulates the condition on real driving to exclude various environmental influences including minerals, driver's habits, road surface, weather, tire structure and pattern designs. After the evaluation in closed space, it is estimated that the amount of collected Tire and Road Wear Particles is 84% compared to 100% of the tire and road wear loss weight, of which 96.4~97.7% was around the road and 2.3~3.6% was in the air. As a result of analy sis of the collected Tire and Road Wear particles, the tire component existed 63~75% in the Tire and Road Wear Particles depending on the wear resistance performance of the tire.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.157-163
• /
• 2022

The demands for Home Meal Replacement (HMR) products are continuously increasing owing to the convenience of instant food and online food delivery. Ready-to-heat (RTH) products have received massive attention in the HMR industry because these products can be easily warmed using a microwave oven. However, the conventional microwave packaging should be opened before microwave heating to prevent bursting or food loss owing to the steam-pressure build-up inside the package. Open packaging might lead to non-uniform food heating and cross-contamination. Therefore, packaging materials that are able to release steam without opening are of interest to the HMR industry. In this study, polylactic acid(PLA)/polyethylene glycol(PEG)/nanoclay composite films were manufactured using an extrusion method as packaging materials with a smart steam-releasing function. The introduction of PEG to the PLA imparted a steam self-releasing feature to the composite films owing to the morphology change of composite films during microwave heating. Further, PEG increased the ductility of PLA, which in turn prevented bursting caused due to the steam-pressure build-up. The uniform dispersion of nanoclay obtained by a twin-screw extrusion led to stronger mechanical properties. Therefore, the smart composite films developed here can be applied as microwave packaging materials with a self-releasing function.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.550-559
• /
• 2022

Purpose: Pipes are widely used as applied devices in many industrial fields such as machinery, electronics, electricity, and plants, and are also widely used in safety-related fields such as firefighting and chemistry. With the diversification of products, the importance of technology in the piping field is also increasing. In particular, when changing the existing copper pipe to stainless steel, it is necessary to evaluate safety and flow characteristics through structural analysis or flow analysis. Method: This study investigated the safety by flow analysis of the 6.35 inch socket model, which are integrated insert type connectors developed by a company, using CFD analysis technique. For CDF analysis, RAN model and LES model are used. Result: As results of the analysis, amplitude of the pressure fluctuation acting on the wall of the piping system is formed at a level of 3,780 Pa or less, which is a very small level of pressure compared with the operating pressure or design stress of the refrigerant piping. Conclusion: These results mean that the effect of vibration caused by turbulence on the structural safety of the pipe is negligible.

• Clean Technology
• /
• v.28 no.2
• /
• pp.163-173
• /
• 2022

Research and development of biofuels as one of the means to mitigate global warming and to avoid fossil fuel depletion has occurred for more than 30 years. However, there has only been limited distribution of a few first- and second-generation biofuels, and widespread supply and consumption of biofuels is still far from a reality. Although a relatively recently studied third-generation biofuel derived from seaweed biomass has been shown to have many advantages, it is yet to be deployed in commercial-scale seaweed biorefineries. This review paper examines the advantages and disadvantages of seaweed biorefineries for the entire value chain covering from seaweed and its cultivation to biofuel production based on an extensive literature search and the author's experience of conducting feasibility studies pertaining to seaweed biorefineries for over 10 years. For this purpose, the literature survey will cover the current status of seaweed production and its research and development worldwide, conversion technologies for biofuel production from seaweed based on bench-scale experiments, and large-scale techno-economic feasibility studies for seaweed conversion to biofuels and bioenergy. In addition, the main problems expected with the commercialization of seaweed-based biofuels will be identified. Finally, the current status of seaweed biorefinery technology and the author's views on its promising future will be summarized.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.777-799
• /
• 2022

This study examined the latest EU regulatory strengthening trends for refrigerant gases with very large global warming potential (GWP) and derived implications for carbon neutrality. The European Commission recently unveiled an amendment that significantly strengthens the F-gas Regulation. This study presented the meaning of the main contents related to refrigerants in the amendment by comparing them with the current regulations. The main contents of the amendment include drastically reducing the maximum amount of HFCs that can be placed on the market, strengthening regulations related to HFCs allocation, adding products and equipment that use high GWP refrigerants, adding regulated F-gas and updating the GWP of existing gases, and other stricter regulatory designs. This movement of the EU will affect the policy stance of advanced countries such as the United States and Japan, and Korea's policy will also be further strengthened. Therefore, it will be inevitable for related industries to change to next-generation refrigerant gas. Meanwhile, this study also analyzed the latest policy trends related to per- and polyfluoralkyl substances (PFAS) regulation, which were not noted in previsou studies on refrigerants and F-gas. If PFAS's registration of REACH restricted substances, which are being promoted by five European countries, is made, it will have a very big impact on the industry regarding refrigerant gas. In addition, it will be inevitable to thoroughly review each country's greenhouse gas reduction strategies related to F-gas materials, including refrigerants.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.363-370
• /
• 2023

In order to use Cudrania tricuspidata extract for the development of health-functional food, biological changes in normal rodents, such as changes in blood constituent cells, blood lipids, and anti-inflammatory activity, were measured after the rodents had been drinking the substance for 2 weeks. A 30 mg daily dose of the extract taken for 2 weeks produced no change in body weight or renal function, and no toxicity was observed. Increased red blood cell levels and white blood cell levels were confirmed, and platelet counts tended to increase; thus, the extract seems to cause an overall increase in blood cells. In the case of blood lipids, it was confirmed that the extract-treated group exhibited an effect of improved blood-lipid levels, demonstrated through an increase in HDL-C of 21%, with a decrease in triglyceride of 27% compared to the control group. In addition, the decreases in both GOT and GPT led to improved liver function through use of the extract. Therefore, this study suggests that drinking Cudrania tricuspidata extract can have various effects, such as promoting blood cell production, improving blood lipids profile, improving liver function, and improving inflammatory action. The extract would be useful in the future in developing high-value industrial products such as functional foods and pharmaceuticals.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.1
• /
• pp.1-22
• /
• 2023

This study proposes an integrated use of region and industry as a way to classify firms' innovation activities by type. Existing studies have used the method of determining innovative activities according to the components of the technological regimes and aggregating them by industry classification, but this method cannot fully reflect the heterogeneity within industries in an increasingly sophisticated innovation environment. Therefore, this study divides firms by region and industry and conducts a cluster analysis on the proportion of innovative activities by the components of the technological regimes to derive a total of four innovation types. Using the 2016 Korean Innovation Survey to classify innovation types in the manufacturing industry, we found that innovation activities are concentrated in Seoul, Busan, Incheon, and Chungnam/ Sejong/ Daejeon area, with different deviations by region and industry. The results of the aggregation of industrial innovation activities, weighted by corporate activity by region, show that the level of innovation activity in some manufacturing industries, such as petrochemicals, manufacturing of medical, precision and optical instruments, watches and clocks, is high, but the level of innovation in other sectors within the manufacturing industry is generally low.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.264-271
• /
• 2023

In this study, ASCO^Ⓡ SLES-430 surfactant was synthesized by adducting 3 moles of ethylene oxide and 1 mole of propylene oxide to lauryl alcohol followed by a sulfation process, and the structure of the synthesized ASCO^Ⓡ SLES-430 was elucidated by performing FT-IR, ¹H-NMR and ¹³C-NMR analyses. Interfacial properties such as critical micelle concentration, static surface tension, emulsification index, and contact angle were measured, and environmental compatibility indices such as oral toxicity and skin irritation were also estimated for ASCO^Ⓡ SLES-430. Both results were compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328 SLES surfactants possessing 2 moles and 3 moles of ethylene oxide, respectively. In particular, both foaming ability and foam stability were evaluated for ASCO^Ⓡ SLES-430 and compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328, which have been widely used in detergent products, in order to test the potential applicability of ASCO^Ⓡ SLES-430 in detergent product formulation for a small capacity built-in washing machine.

• Journal of Life Science
• /
• v.33 no.6
• /
• pp.506-511
• /
• 2023

The purposes of this study were to isolate and characterize lactic acid bacteria with antibacterial activity against Methicillin-resistant Staphylococcus aureus (MRSA) from fermented food and to confirm the antibacterial activities of fermented rice products using the isolated lactic acid bacterium. Three bacteria, namely, Weissella sp. ISF-1, ISF-2, and ISF-3, were selected from fermented squid based on the 16S rRNA gene sequence. All three strains grew well in an MRS medium containing 5% (w/v) NaCl and showed antibacterial activity against Bacillus cereus, Staphylococcus aureus, and MRSA. Their growth was excellent at 0% ~ 5% (w/v) NaCl and relatively good up to 7% (w/v) NaCl. The initial pH of 8 was optimal for their growth, and good growth was also observed at pH 6, 7, and 9. The lyophilisates of the fermented rice using Weissella sp. ISF-1 showed antibacterial activities against B. cereus, S. aureus, and MRSA. We inferred that isolated lactic acid bacteria could be useful in the development of probiotics and biopreservatives for foods and in the treatment of MRSA and may increase the value of rice products.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.456-462
• /
• 2023

An electrically conductive and transparent electrode was created by applying a dispersion of pristine single-walled carbon nanotubes (SWCNTs) and silver nanowires to a polyethylene terephthalate (PET) film using a bar coating method. The SWCNTs were added to increase the electrical conductivity and transmittance of the silver nanowires while also preventing the haze from increasing due to the stacking of multiple layers containing SWCNTs and silver nanowires on the PET substrate. The silver nanowires in the electrode were also found to be stable against oxidation. The transparent electrode displayed excellent electrical and optical properties, with a sheet resistance of 47 Ω/□, transmittance of 96.72%, and haze of 1.93%. Additionally, the sheet resistance of the electrode remained stable over time, with a change of only 6.4% after a constant temperature and humidity test, making it suitable for long-term use. A hybrid transparent electrode that is economically feasible and environmentally sustainable has been developed through the utilization of pristine SWCNT and silver nanowire.