• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.118-124
• /
• 2008

The chemical compositions and antioxidant activities of four different colored rice cultivars (white-colored rice: WCR, brown-colored rice: BCR, brown-colored waxy rice: BCWR, black-colored rice: BKCR) were investigated to evaluate the quality characteristics of the new brown rice cultivars. There was no significant differences in chemical compositions amongst the four rice cultivars, although WCR had higher amount of carbohydrate than did the other rice cultivars. 'The major fatty acids in the four rice cultivars were linoleic, oleic and palmitic acids, which accounted for about 96% of total fatty acids. Of note, higher amounts of saturated fatty acids (24.8%) and lower amount of unsaturated fatty acids (75.2%) were observed in BKCR than in the other rice cultivars. Two brown-colored rice cultivars, BCR and BCWR, possessed higher amounts of linoleic acid (40.8% and 42.1%, respectively) than did the other cultivars. The highest level of ${\alpha}$-tocopherol was found in WCR (51.3mg%), followed by BKCR (38.6mg%), BCWR (37.2 mg%), and BCR (34.5mg%). Free amino acid analysis showed that aspartic and glutamic acids were major amino acids of all cultivars, whereas phenylalanine, lysine, and histidine were minor. Particularly, relatively higher contents of aspartic and glutamic acids were found in BKCR, while relatively higher levels of alanine and ${\gamma}$-aminobutyric acid (GABA) were observed in BCR and BCWR. Also, BKCR had the highest phenolic content and antioxidant activity of any cultivar, followed by the two brown-colored rice cultivars and WCR. These results suggested that the new brown rice cultivars may possess quality characteristics intermediate between those of WCR and BCR.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Journal of the Korean Chemical Society
• /
• v.62 no.4
• /
• pp.269-274
• /
• 2018

Surface renewable nano-$RuO_2$/poly(methyl methacrylate) polymeric composite pH electrodes were prepared. The composite electrode with 53 wt% of nano-$RuO_2$ showed similar good response characteristics to nano-$IrO_2$ composite electrode reported earlier. It showed response slope of -58.7 mV/pH, response time of <1 s, surface renewability of $-57.0{\pm}0.3mV/pH$ (n=5) and long time stability for a month as well as low interferences but high interferences by electrochemically active species like $I^-$ and $Fe(CN){_6}^{3-}$. However, the response slope and time became worse at higher pH than 9 compared to those of nano-$IrO_2$ composite electrodes possibly due to the difference of physical properties resulting from higher content of nano-$RuO_2$ in polymeric composite matrix.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.289-298
• /
• 1996

Eight kinds of poly(oxyethylene, oxyisopropylene) dodecyl ethers were synthesized by adding ethylene oxide and isopropylene oxide with each 5 and 10 moles alternatively on dodecanol. The addition of EO and PO for eight kinds of sodium poly(oxyethylene, oxyisopropylene) dodecyl ether sulfates was identified with HPLC, $^1H$ NMR, hydroxy value, and IR spectrum. In order to verify the sulfation the number of EO and PO molecules was obtained by spectra and Epton method. The yields of products sulfated by chlorosulfonic acid were 90~96%.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.107-125
• /
• 2024

Three types of veterinary antibiotics, including oxytetracycline (OTC) and chlortetracycline (CTC) of tetracycline class and amoxicillin (AMX) of penicilline class, were artificially introduced into the irrigation water. The residue of veterinary antibiotics in the soil, the absorption-translocation of veterinary antibiotics into the red lettuce and young radish plant, and crops yield were investigated according to the agricultural water irrigation method (surface drip irrigation, underground drip irrigation, and sprinkler irrigation). There was no significant difference in the residue and translocation of veterinary antibiotics in the soils and crops according to the irrigation method and type of veterinary antibiotics (p>0.05). For the edible parts of red lettuce and young radish, all three types of veterinary antibiotics were found to be below the detection limit, indicating that the safety of the crops was secured. The translocation factor of red lettuce and young radish were found to be less than 0.3 and 0.2, respectively. However, continuous introduction of veterinary antibiotics in agricultural arable lands may have negative effects by affecting soil microbial activity and soil microbe species diversity, so continuous management is deemed necessary.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.973-977
• /
• 2013

These studies were attempted to investigate the change of microbial community of anode of microbial fuel cell using swine wastewater in the enrichment step with the lapse of time. Microbial fuel cells enriched by a 1 : 1 mixture of anaerobic digestive juices of the sewage treatment plant and livestock wastewater. Enrichment culture step was divided into three stages to indentify the microorganisms. It was separated by each lag phase, exponential phase, and stationary phase. These steps were determined by the change of the current value. The current after enrichment was generated about $0.84{\pm}0.06mA$. We were cut out the different 17 bands in the DGGE fingerprint gel to do sequencing. The bands which the concentration was increasing or newly appearing with the lapse of time were included for this study. In the lag and exponential phase, Clostridium, Rhodocyclaceae, Bacteriodetes, and Uncultured bacterium etc. were detected. There were in the stationary phase Geobacter sp., Rhodocyclaceae, Candidatus, Nitrospira, Flavobactriaceae and uncultured bacterium etc. Geobactor among microorganisms detected in this study is known as the Electrochemically active microorganisms. It may include electrochemically active microorganisms to be considered as electrical activity microorganisms.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1178-1184
• /
• 2006

This study was carried out to investigate the effect of ethanol extract of antler velvet (EAV) on common serum chemistry panels and histopathological change in rats exposed to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Administration of TCDD ($50{\mu}g/kg$ body weight) induced significant decrease in platelet count (p<0.01), creatine phosphokinase (CPK, p<0.01), lactatate dehydrogenase (LDH, p<0.05) and glucose (p<0.05) levels and increase in hemoglobin (p<0.05), aspartate aminotransferase (AST, p<0.01), alanine amino transferase (ALT, p<0.05) and lipase activities (p<0.05), and blood urea nitrogen (BUN, p<0.05), triglyceride (p<0.01) and low density lipoptotein cholesterol (LDL-C, p<0.05) levels. However, pretreatment of EAV at daily dose of 20 mg/kg b.w. from 1 wk before TCDD exposure for 5 wks attenuated the abnormality of the overall serum chemistry panels but statistical difference between TE and TA groups was observed only in testicular weight (p<0.01), LDH activity (p<0.05), glucose (p<0.05) and lipase activity (p<0.01). In addition, TCDD induced significant histopathological changes including swelling, fatty metamorphosis, and vacuolar degeneration in liver; edema in proximal and distal convoluted tubules, and glomerulus in kidney; severe atrophy of red purple and appearance of significant number of macrophage in spleen; prominent atrophy and decrease in immune cells in thymus. On the other hand, administration of EAV attenuated histopathological damage induced by TCDD. These results further suggest that administration of EAV attenuates TCDD induced testicular, liver, pancreatic, hematopoietic and nephrotic toxicities in rats.

• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2007

The BOD (biochemical oxygen demand) sensor was fabricated by covering a dissolved oxygen (DO) probe with a microbe-impregnated membrane and a dialysis membrane. Various microorganisms isolated from the soils, water and activated sludge have been evaluated for measuring biochemical oxygen demand (BOD); Bacillus species HN24 and HN93 were selected as they exhibited rapid oxygen consumption and fast recovery. Improved BOD sensor could be prepared by using mixed microbes (Bacillus subtilis, Bacillus sp. HN24 and Bacillus sp. NH93) and silicon rubber gas-permeable membrane for DO probe, and by bubbling 50% $O_2$ ($N_2$ valence) through background buffer solution. This system exhibited excellent analytical performance resulting in good linearity ($r^2=0.9986$) from 0 to 100 mg/L level of BOD.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.349-355
• /
• 2018

This study interrogated multi-layer heterojunction anodes were interrogated for potential applications to water treatment. The multi-layer anodes with outer layers of $SnO_2/Bi_2O_3$ and/or $TiO_2/Bi_2O_3$ onto $IrO_2/Ta_2O_5$ electrodes were prepared by thermal decomposition and characterized in terms of reactive chlorine species (RCS) generation in 50 mM NaCl solutions. The $IrO_2/Ta_2O_5$ layer on Ti substrate (Anode 1) primarily served as an electron shuttle. The current efficiency (CE) and energy efficiency (EE) for RCS generation were significantly enhanced by the further coating of $SnO_2/Bi_2O_3$ (Anode 2) and $TiO_2/Bi_2O_3$ (Anode 3) layers onto the Anode 1, despite moderate losses in electrical conductivity and active surface area. The CE of the Anode 3 was found to show the highest RCS generation rate, whereas the multi-junction architecture (Anode 4, sequential coating of $IrO_2/Ta_2O_5$, $SnO_2/Bi_2O_3$, and $TiO_2/Bi_2O_3$) showed marginal improvement. The microscopic observations indicated that the outer $TiO_2/Bi_2O_3$ could form a crack-free layer by an incorporation of anatase $TiO_2$ particles, potentially increasing the service life of the anode. The results of this study are expected to broaden the usage of dimensionally stable anodes in water treatment with an enhanced RCS generation and lifetime.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.11-25
• /
• 2009

Fuel cells are expected to be one of the major clean new energy sources in the near future. However, the slow kinetics of electrocatalytic hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR), and the high loading of Pt for the anode and cathode material are the urgent issues to be addressed since they determine the efficiency and the cost of this energy source. In this review paper, a new approach was developed for designing electrocatalysts for the HOR and ORR in fuel cells. It was found that the electronic properties of Pt could be fine-tuned by the electronic and geometric effects introduced by the substrate alloy metal and the lateral effects of the neighboring metal atoms. The role of substrate was found reflected in a volcano plot for the HOR and ORR as a function of their calculated d-band centers. This paper demonstrated a viable way to designing the electrocatalysts which could successfully alleviate two issue facing the commercializing of the fuel cell-the cost of electrocatalysts and their efficiency.