• Journal of the KSME
• /
• v.25 no.3
• /
• pp.236-241
• /
• 1985

본 고에서는 일반적으로 노즐 부위 열해석에서 무시되는 복사열전달율과 점성소산효과를 수치적 모델을 통하여 그 필요성 여부를 조사한 것이며 다음과 같은 결론을 얻었다. (1)연소실 및 수 렴부위에서는 복사열전달율이 대류열전달율과 같은 차수의 크기로 나타나고 있어서 고 복사율을 갖는 연소가스에서는 특히 중요하다. 특히 최근에 많이 사용되는 연료에는 연소가스에 산화알 루미늄 성분이 증가하는 추세이므로 노즐부위 열해석에는 복사열전달이 차지하는 비중이 커질 것이다. (2)노즐의 확산부위에서는 고속으로 인하여 가스자체의 점성소산이 일어나 특성치 보 정계수 값이 감소한다. 따라서 Bartz의 예측치 보다는 열전달계수의 값이 적어지고 있다. (3) 따라서 노즐수렴부위에서는 일반적으로 Bartz의 예상치보다 높고 확산부에서는 낮은 결과를 얻 었던 실험결과와를 비교할 때 고온고속 노즐에서의 열전달해석은 복사 열전달과 점성열 소산을 고려함으로써 정확하게 될 수 있다. (4)이상 고려된 실험 데이터와 수치모델의 고찰은 노즐내의 침식이 없는 경우이나 실제의 경우 노즐벽 표면에서 화학적 반응이 일어난다. 그러나 이때 발 생될 수 있는 순수한 발한효과는 미미하며 단지 전체적인 단면의 열 해석시 상기에서 예측된 열전달율을 근간으로 화학반응열 및 온도분포를 계산하여야 할 것이다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.557-560
• /
• 2008

Fiber reinforcement has been being widely used in concrete to enhance the mechanical properties and to reduce the micro-cracking caused by plastic and drying shrinkage. While researches has been focused on the benefits of fiber reinforcement, the properties of fiber reinforced concrete are strongly dependent on the type, shape and the amount of fibers in concrete. In this study, the resistance of nylon fiber reinforced concrete against the chloride ion penetration was experimentally observed by NT Build 492. The test results showed that the addition of nylon fiber has little effect on the change of the resistivity of concrete to the chloride ion penetration.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.209-217
• /
• 2010

Recently, some mathematical models for the prediction on progress of carbonation of concrete were reported. These models take account for $CO_2$ diffusion and chemical reaction between $Ca(OH)_2$ and $CO_2$. Based on the assumption that $CO_2$ diffuses in the carbonation zone and reacts with $Ca(OH)_2$ at the outer face of carbonation zone and non-carbonation zone. In this study, a mathematical model to predict the progress of carbonation of concrete has been established based on the reducing concentration of $Ca(OH)_2$ in the carbonation progress zone, where $Ca(OH)_2$ reacts with $CO_2$ and $Ca(OH)_2$ and $CaCO_3$ coexist. Also, the prediction model of carbonation progress rate of concrete using the air permeability coefficient regarding to $CO_2$ diffusion is developed. As a result of this study, an expression, the model equation is obtained for the prediction of carbonation based on the time and interaction velocity between $CO_2$ and Ca(OH)$_2$ dependent air permeability coefficient. The prediction by the model satisfied the experimental data of the accelerated carbonation for painted concrete. Consequently, the model can predict the rate of carbonation and the potential service life of concrete structure exposed to atmosphere.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1043-1052
• /
• 1996

Supercritical fluid chromatographic method was recommended as an alternative separation method of fatty acids of the conventional method such as distillation or extraction. Although diffusion characteristics are varied by the carbon numbers and the degree of unsaturation of fatty acids, the quantitative data were so rare that the commercialization of supercritical fluid chromatographic method has been hindered. In this study, diffusion coefficients of fatty acids which are differently unsaturated are measured by CPB method in the range of 308.15K to 328.15K and 13MPa to 17MPa in supercritical carbon dioxide. A decrease in the binary diffusion coefficient was observed with an increase in temperature and pressure. Also, the decrease in the binary diffusion coefficient with increasing fluid density and viscosity. Wilke-Chang equation, Funazukuri empirical equation, and Matthews-Akgerman equation are used to correlate the experimental diffusion coefficients of fatty acids in supercritical carbon dioxide. Among the various theoretical equations, Matthews-Akgerman equation based on RHS theory was suggested as a more successful correlation model with experimental data.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.438-449
• /
• 2020

This study is to improve the method of calculating the risk of liability that arise from release and dispersion of chemicals outside the plant in process industries such as chemical and petrochemical plants. To achieve this goal, the correlation factors with the risk of chemical release accident is derived by simulating release and dispersion of substances (14 types) designated by Ministry of Environment as preparation for accident, analyzing the cases of chemical release and effects of plant life damage. The method of calculating chemical liability risk was modified and supplemented based on the results obtained from the study. The correlation coefficient between the probit value of 14 chemical types and the liability risk by EURAM (European Union Risk Ranking Method) was -0.526, while the correlation coefficient with the modified chemical release accident risk was 0.319. Thus, the value from modified method shows that they appear to be correlated. According to modified calculating methodology, the correlation between ERPG-2 value and liability risk of 97 chemical types was -0.494 which is 19 times higher than existing liability risk correlation as absolute value. And the correlation coefficient of corrosion risk was 0.91. The standardized regression coefficients (β) value of correlation factors that affected the increase and decrease of risk were derived in order of Corrosion Index(0.713), ERPG-2 (0.400) and NFPA Health Index (0.0680) by values. It is expected that these findings this study result will also enable the calculation of reasonable chemical release liability risk for existing and new chemical, and will help use them as quantitative liability risk management indicators for chemical plant site.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.376-381
• /
• 2017

We were investigated by cyclic voltammetry to the stability through the electrochemical characteristics of Langmuir-Blodgett films mixed with myristic acid and stearic acid. Fatty acid mixture monolayer LB films was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties was measured by cyclic voltammetry with a three-electrode system in 0.01 N $NaClO_4$ solution. The measuring range is continuously oxidized to 1650 mV, with an initial potential of -1350 mV was reduced. Scanning rates of 50, 100, 150, 200, and 250 mV/s was set. As a result, LB monolayer films of fatty acid mixture was appeared on irreversible processes by the oxidation current from the cyclic voltammogram. Diffusion coefficient (D) of fatty acid mixture was calculated $7.9{\times}10^{-2}cm^2s^{-1}$ at 0.01 N $NaClO_4$ solution.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.352-358
• /
• 2014

We were investigated the stability through the electrochemical characteristics of saturated fatty acid(C12, C14, C16, C18) monolayer LB films by cyclic voltammetry. Saturated fatty acid monolayer LB films was deposited on the indium tin oxide(ITO) glass by the LB method. The electrochemical properties were measured by cyclic voltammetry with a three-electrode system in 0.1 N $NaClO_4$ solution. The measuring range was continuously oxidized to 1650 mV, with an initial potential of -1350 mV was reduced. Scanning rates of 50, 100, 150, 200, and 250 mV/s were set. As a result, LB monolayer films of saturated fatty acid were appeared on irreversible processes by the oxidation current from the cyclic voltammogram. Diffusion coefficient(D) of saturated fatty acid(C12, C14, C16, and C18) was calculated 22.231, 2.461, 7.114 and 2.371 ($cm^2s^{-1}{\times}10^{-4}$) in 0.1 N $NaClO_4$ solution, respectively.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.106-115
• /
• 1996

본 연구에서는 PET(PentaEthoxy Tanatalum:Ta(OC2H5)5) 유기금속 화합물 전구체를 사용하여 차세대 초고집적회로 제조시 고유전체 물질로 유망한 Ta2O5 박막을 열화학증착 방법에 의하여 증착하였다. 본 증착실험을 통하여 여러 가지 운속기체, 기판온도, 반응압력 등의 공정변수가 층덮힘에 미치는 영향을 고찰하였으며 Monte Carlo 전산모사 결과와 기판온도 변화에 따른 층덮힘 패턴의 변화에 대한 실험결과를 비교하여 부착계수를 산출하였다. 운송기체로는 N2, Ar, He을 바꿔가며 실험하였으며 He>N2>Artns으로 층덮힘이 양호한 것으로 나타났다. 이는 운송기체의 종류에 따라 운동량 확산도, 열 확산도, 물질 확산도 등의 이동현상 특성값들이 다르기 때문이라 생각된다. 기판온도의 증가는 운송기체의 종류에 관계없이 층덮힘을 악화시켰으며 도랑내부에서의 Knudsen 확산과 표면반응물의 탈착에 비해 표면반응이 보다 지배적인 역할을 담당함을 알 수 있었다. 또한 질소를 운송기체로 사용한 경우에 부착계수의 겉보기 활성화 에너지는 15.9Kcal/mol로 나타났다. 그리고 3Torr 이하에서 반응압력이 증가하는 반응압력이 증가하는 경우에는 물질 확산도의 감소 효과 때문에 층덮힘이 악화되었다. 본 연구결과 3Torr, 35$0^{\circ}C$에서 He 운송기체를 이용한 경우가 가장 우수한 층덮힘을 얻을 수 있는 최적 공정 조건임을 알 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.196-202
• /
• 2006

The self diffusion distributions of viscoelastic molten polyurethanes were determined from the relationship between the relaxation spectra and the distribution of self diffusion. The relaxation spectra of ester, PCL and PCL dyed type molten polyurethanes were obtained by applying the experimental stress relaxation curves to the theoretical equation of the Ree-Eyring and Maxwell non-Newtonian model(REM model) from computer calculation. The experiments were carried out at various temperatures using the physica rheometer with the temperature controller. The self diffusion and hole distance of amorphous region of polyurethane samples were investigated by experiments of stress relaxation. The diffusion coefficients and hole volumes were calculated from rheological parameters and crystallite size in order to study the diffusion of flow segments in amorphous region. It was observed that the relaxation spectra and self diffusions of these polymer samples are directly related to the distribution of molecular weights, viscosities, hole volumes and activation energies of flow segments.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.505-508
• /
• 2008

Concrete is a type of porous materials and is physically and chemically damaged due to exposure to various environments from the placing to the service life. These reactions affect the corrosionof steel bars applied in concrete and that decreases the durability life and strength of such steel bars. Thus, it is very important to insert rust inhibitors into steel bars in the case of a deterioration element that exceeds the critical amount of corrosion in the location of steel bars. However, it is very difficult to guarantee corrosion resistance at the location of steel bars using conventional technology that applies corrosion inhibitors only on the surface of concrete. This study attempts to develop a method that penetrates corrosion inhibitors up to the location of steel bars and investigate the penetration depth of corrosion inhibitors by verifying moisture migration in concrete under an applied pressure.