• Journal of the Korean Ceramic Society
• /
• v.36 no.5
• /
• pp.555-563
• /
• 1999

Impregnation of phosphorous additiers into graphite bulk was studied with the goal of enhancing the effectiveness of oxidationprotection. In addition graphite acid washing was carried out prior to the impregnation further to improve oxidation resistance. Observation of the oxidation rate for raw graphite(Raw) impregnated graphite with tri-butyl phsophate on raw block(RP) and impregnated graphite on acid-treated graphite(AP) in air are reported. The phsophorus residue adsorbed on the graphite surface at active sites was determined by FTIR, XRS, TGA techniques. AP with tri-butyl phosphate was found to result in both 30% reduction in oxidation rate at 1000$^{\circ}C$ compared to Raw and increase of 120$^{\circ}C$ in oxidation temperature From the samples of oxidation rate of each specimen in Arrhenius plot it can be said that the present oxidation resistance origninates from the change of chemical reaction modesw neigther by acid-washing treatment nor phsophate impregnation

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.233-233
• /
• 2013

유기물/무기물 나노복합체를 이용하여 제작한 비휘발성 메모리 소자는 간단한 공정과 플렉서블 기기 응용 가능성 때문에 많은 연구가 진행되고 있다. 다양한 나노입자를 포함한 고분자 박막에 대한 연구는 많이 진행되었지만, 비휘발성 메모리소자에서 CdSe/InP 나노입자를 사용한 나노복합체의 전기적 안정성과 동작 메커니즘에 대한연구는 미흡하다. 본 연구는 CdSe/InP 코어/쉘 나노입자가 poly (N-vinylcarbazole) (PVK) 박막에 분산되어 있는 나노복합체를 이용하여 메모리 소자를 제작하여 전기적 특성과 안정성을 관찰 하였다. 소자 제작을 위해PVK 고분자를 용매인 클로로벤젠에 용해한 후, 헥산에 안정화 되어있는 CdSe/InP 나노입자를 초음파 교반기를 사용하여 고르게 섞었다. Indium-tin-oxide (ITO)가 증착한 유리 기판을 화학물질로 세척한 후 기판 위에 CdSe/InP 나노입자와 절연성 고분자인 PVK가 혼합된 용액을 스핀코팅 방법으로 도포하여 나노입자가 포함된 고분자 박막층을 형성하여 저항 변화층으로 사용하였다. 형성된 박막 위에 마스크를 사용하여 Al 상부전극을 고진공에서 열 증착하여 비휘발성 메모리 소자를 제작하였다. 제작된 소자의 전류-전압(I-V) 특성을 측정한 결과 동일전압에서 전도도가 좋은 상태 (ON)와 좋지 않은 상태 (OFF)인 두 개의 상태상 존재한다는 것을 확인하였고, CdSe/InP인 나노입자가 포함된 소자와 포함되지 않은 소자의 전기적 특성을 비교 분석하였다. 두 상태의 안정성을 ON 또는OFF 상태의 스트레스를 측정하여 두 상태의 안정성을 확인하였고, 실험결과를 바탕으로 메모리 소자의 동작 메커니즘을 기술하였다.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.3
• /
• pp.276-284
• /
• 2005

Backgraound : There have been many reports on the pathogenesis of sepsis-induced acute respiratory distress syndrome(ARDS) but, the precise mechanism has not been elucidated. This study examined the protective effect of an inhibition of platelet activating factor(PAF) remodeling and the adhesion molecule on the oxidative stress of the lungs in rats with an endotoxin induced acute lung injury(ALI). Methods : ALI was induced in Sprague-Dawley rats by instilling an E-coli endotoxin into the trachea. Ketotifen and fucoidan were used respectively to inhibit PAF remodeling and adhesion molecule. The lung leak index, lung myeloperoxidase(MPO) activity, bronchoalveolar lavage(BAL) fluid neutrophil count and lyso PAF acetyltransferase activity(AT), were measured and an ultrastructural study and cytochemical electron microscopy were performed. Results : The lung leak index, lung MPO activity, BAL fluid neutrophil count and lyso PAF AT activity was higher in the endotoxin-treated rats. In addition, severe destruction of the pulmonary architecture and increased hydrogen peroxide production were identified. These changes were reversed by ketotifen. However, fucoidan did not appear to have any protective effects. Conclusion : The inhibition of PAF remodeling appeared to be effective in decreasing the endotoxin-induced ALI. In addition, this effect might be derived from the inhibition of neutrophilic oxidative stress. However, the inhibition of the adhesion molecules by fucoidan appeared to be ineffective in decreasing the endotoxin-induced ALI.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.331-337
• /
• 2016

Radial collector wells (RCWs) have been managed by Korea Rural Community Corporation (KRC) since 1983, installing 98 wells for agriculture in rural area over the country. Among them, 20 wells were installed upstream of 5 subsurface dams and the remaining were installed regardless of the subsurface dam. Most of RCWs have been developed in 1980s and 1990s, and 83 wells have been passed more than 20 years after construction. The number of horizontal arms for RCWs varies from 9 to 28, with length and diameter being 10~30 m and 65 mm, respectively. The central caisson with an inner diameter of 3.5 m was commonly constructed to a depth of 10 m. The maximum pumping rates in RCWs, which are located at distances of 10 to 1,200 m from the river, are 2,000~10,000 m³/day. RCW has a fundamental problem that reduced pumping capacity and degraded well efficiency, due to the physical and chemical clogging. From the feasibility test for improving RCW performance, specific capacity increased to 67% after rehabilitation. TV logging for RCW horizontal arm shows that near the caisson is more severe clogging. From the results of this study, KRC has established the guidebook for monitoring and improving well efficiency through physical/chemical treatment, well logging, and hydraulic tests and managed RCWs periodically with its rehabilitation methods.

• Conservation Science in Museum
• /
• v.27
• /
• pp.67-90
• /
• 2022

A C-46 transport aircraft, which can be thought of as a large cultural heritage item from the modern period, was subjected to paint analysis and conservation treatment in preparation for its exhibition. The C-46 is the first aircraft ever dispatched to overseas combat zones by the Korean Air Force and carried out missions during the Vietnam War. The aircraft is mainly made of aluminum and shows signs of corrosion on its surface, including pitting and etching, as well as gray and white powdery attachments. In the analysis of the paint, diatomite(SiO₂·nH₂O) was confirmed in the red paint, titanium dioxide(TiO₂) was identified in the white paint, black iron oxide(Fe₃O₄) was detected in the black paint, and colcothar(Fe₃O₄) mixed with putty was confirmed in the blue paint. Infrared spectroscopy revealed the use of alkyd resin in the paint on the main body and nitrocellulose in the Taegeuk pattern. During the conservation treatment, mechanical cleaning, such as sanding, was conducted to remove paint and varnish from the surface. Corrosion was removed by sanding and cleaning with chemical solvents, and new paints and varnishes were applied. Through the paint analysis and conservation treatment, the aircraft was made available for exhibition in a stable condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.313-316
• /
• 2002

비철금속 습식 제련용 고효율 장수명의 양극을 개발하기 위해서 산소 과전압이 낮은 $MnO_{2}$를 촉매로 사용하여 반도체 산화물계의 산소선택성 전극을 제조하고 산화물 coating층의 미세구조와 전기화학적 특성을 분석하였다. PVDF : $MnO_{2}$의 함량비플 1 : 1 에서 1 : 40까지 정량적으로 변화시켰고， 용제의 점도에 지배적인 영향을 미치는 DMF의 함량을 각각의 고정된 PVDF : $MnO_{2}$의 함량비에서 변화시켜 용제를 제조하였으며 4% $HNO_{3}$ 용액에 세척된 Pb전극을 1.5 mm/sec 의 속도로 5회 dipping 하였다. PVDF : $MnO_{2}$ = 1 : 6인 경우 PVDF의 양이 증가하고 DMF의 양이 감소할수록 피막층이 두꺼워지고 PVDF : DMF = 4 : 96인 경우 pb 전극의 피막층이 얇기 때문에 박리현상이 일어났으며 이는 산화물 용제의 낮은 점도 때문인 것으로 판단된다. 또한 PVDF : DMF = 10 : 90의 경우는 5회 dipping 하여 약 $150{\mu}m$의 피막층을 형성하였다. PVDF : Mn02의 함량비가 1:1에서 1:6 까지는 DMF의 함량에 무관하게 전극 특성이 나타나지 않았지만 $MnO_{2}$의 양이 상대적으로 증가하면 cycle 이 증가하더라도 거의 일정한 전류 값을 갖고$MnO_2$와 PVDF의 비가 20:1 이상의 조성에서는 균일한 CV 특성을 나타냈다 이는 $MnO_{2}$가 효과적으로 촉매 작용을 한 것으로 판단되며 anodic polarization에 의한 산소 발생 과전압도 약 1.4V 정도로 감소되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.235-235
• /
• 2013

공정의 단순함과 낮은 전력을 사용하여 구동이 가능한 장점을 가진 무기물 나노입자를 포함한 무기물/유기물 나노복합체를 사용한 비휘발성 메모리의 전기적 성질에 대한 연구가 많이 진행되고 있다. 다양한 나노입자를 포함한 고분자 박막에 대한 연구는 많이 진행되었지만, InP/CdSe 코어쉘 나노입자가 고분자 박막에 분산되어 있는 나노복합체를 사용하여 제작한 비휘발성 메모리 소자의 전기적 성질과 소자의 안전성에 대한 연구는 미흡하다. 본 연구에서는 고분자 박막 안에 분산되어 있는 InP/CdSe 코어쉘 나노입자를 사용한 메모리 소자를 제작하여 전기적 성질과 소자의 안정성에 대한 관찰을 하였다. 화학적으로 세척된 indium-tin-oxide (ITO)가 코팅된 유리 기판 위에 InP/CdSe 코어쉘 나노입자와 절연성 고분자가 혼합된 용액을 스핀코팅 방법으로 도포하여 박막을 형성하여 활성층으로 사용하였다. 형성된 박막 위에 Al 상부 전극을 고진공에서 열 증착 방식을 이용하여 ITO/InP/CdSe 코어쉘 나노입자가 분산된 절연성 고분자층/Al 구조를 갖는 메모리 소자를 제작하였다. 제작된 소자의 전류-전압 특성을 측정한 결과 동일 전압에서 전도도가 좋은 상태 (low resistance states; LRS)와 좋지 않은 상태 (high resistance states; HRS)인 두개의 상태가 존재하는 걸 확인하였다. LRS 또는 HRS 변화를 일으키는 일정 전압을 가하기 전까지는 각각의 LRS 또는 HRS를 계속 유지하여 비휘발성 메모리 소자로서의 활용 가능성을 보여주었다. LRS 또는 HRS의 안정성을 확인하기 위해 LRS 또는 HRS의 스트레스 실험으로 관측하였다. 제작된 메모리 소자의 실험 결과를 바탕으로 전하수송 메커니즘을 설명하였다.

• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.157-181
• /
• 2020

Sediments from rivers, lakes and marine ports serve as end points for pollutants discharged into the water, and at the same time serve as sources of pollutants that are continuously released into the water. Until now, the contaminated sediments have been landfilled or dumped at sea. Landfilling, however, was expensive and dumping at sea was completely banned due to the London Convention. Therefore, this study applied contaminated sedimentation soil of 'Royal Palace Livestock Complex' as soil purification method. Soil remediation methods were applied to pretreatment, composting, soil washing, electrokinetics, and thermal desorption by selecting overseas application cases and domestically applicable application technologies. As a result of surveying the site for pollutant characteristics, Disolved Oxigen (DO), Suspended Solid (SS), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP) exceeded the discharged water quality standard, and especially SS, COD, TN, and TP exceeded the standard several tens to several hundred times. Soil showed high concentrations of copper and zinc, which promote the growth of pig feed, and cadmium exceeded 1 standard of Soil Environment Conservation Act. In the pretreatment technology, hydrocyclone was used for particle size separation, and the fine soil was separated by more than 80%. Composting was performed on organic and Total Petroleum Hydrocarbon (TPH) contaminated soils. TPH was treated within the standard of concern, and E. coli was analyzed to be high in organic matter, and the fertilizer specification was satisfied by applying the optimum composting conditions at 70℃, but the organic matter content was lower than the fertilizer specification. As a result of continuous washing test, Cd has 5 levels of residual material in fine soil. Cu and Zn were mostly composed of ion exchange properties (stage 1), carbonates (stage 2), and iron / manganese oxides (stage 3), which facilitate easy separation of contamination. As a result of applying acid dissolution and multi-stage washing step by step, hydrochloric acid, 1.0M, 1: 3, 200rpm, 60min was analyzed as the optimal washing factor. Most of the contaminated sediments were found to satisfy the Soil Environmental Conservation Act's standards. Therefore, as a result of the applicability test of this study, soil with high heavy metal contamination was used as aggregate by applying soil cleaning after pre-treatment. It was possible to verify that it was efficient to use organic and oil-contaminated soil as compost Maturity after exterminating contaminants and E. coli by applying composting.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.51-57
• /
• 2022

This paper investigated catalytic and adsorption equations among the technologies for removing hazardous substances generated in the semiconductor process. As the semiconductor industry develops, harmful substances used and discharged in the semiconductor process are also increasing. Hazardous substances adversely affect the global environment in terms of atmospheric and water quality. As regulations on the emission of harmful substances are strengthened in the 21st century, it is expected that there will be limitations in industrial development in the future. Therefore, technology for removing harmful substances generated in semiconductor processes is essential. In this paper, the goal is to remove PFCs, which are harmful substances, through adsorption technology and catalyst technology. Descriptions from the semiconductor process to the technology in which harmful substances generated are removed were summarized.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.451-464
• /
• 2009

To do conservation for ceramics, sometimes it needs to clean the ceramics chemically to remove stains on the ceramics, which should be performed with caution. This study will provide quantitative data about the extraction characteristics of major elements from ceramics through the soaking test to evaluate the stability of ceramic cleaning agents. As soft textured pottery(fired at $700^{\circ}C$) had high absorption, it showed higher extraction characteristics in short soaking time. Especially the strong acid among chemical cleaning agents caused the expoliation and the color change on the surface of soft textured pottery. But these color change had no effect on the physical characteristics of soft textured pottery. The hard textured pottery(fired at $1,000^{\circ}C$) is relatively stable in the cleaning agent because it is ascertained the extraction of that was not enough and also it had little chromatic and physical change by strong acid. Porcelains(Celadon, Whiteware and Puncheong ware) was safer than the soft textured pottery due to their low extraction. But it should take precautions to clean the porcelains with lots of cracklewares such like Puncheong ware chemically in connection with the extraction characteristics and their cracklewares.