• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.206.2-206.2
• /
• 2013

무기물/유기물 나노복합체로 제작한 유기 쌍안정성 형태의 메모리 소자는 공정이 단순하고 뛰어난 유연성을 갖고 있기 때문에 플렉서블 메모리 소자에서 많은 연구가 진행되고 있다. 그러나 다양한 연구에도 불구하고 절연성 고분자 박막 내부에 분산 된 나노입자를 이용하여 제작한 저항성 구조의 비휘발성 메모리 소자의 전하수송 메커니즘에 대한 연구는 미흡하다. 본 연구에서는 CuInS2 (CIS)/ZnS 나노입자가 분산되어 있는 절연성 고분자 박막을 사용한 기억소자의 전하수송 메커니즘을 규명하였다. 본 연구는 indium-tin-oxide (ITO)가 코팅된 플렉서블 polyethylene terephthalate (PET) 기판을 화학물질로 세척한 후 CIS/ZnS 나노입자와 절연성 고분자인 poly(N-vinylcarbazole)가 혼합된 용액을 스핀코팅 방법으로 도포했다. 도포된 용액에 열처리를 하여 용매를 제거한 후, 형성된 박막을 저항 변화 층으로 사용하였다. 제작된 메모리 소자는 Al 상부 전극을 고 진공에서 열 증착 방식을 이용하여 PET/ITO/CIS-ZnS 나노입자가 분산된 절연성 고분자/Al 구조를 갖는 저항성 기억 소자를 제작하였다. 소자의 전류-전압 (I-V) 특성 결과는 같은 전압에서 전도도가 높은 상태 (ON)와 낮은 상태 (OFF)가 존재하는 걸을 관찰하였다. 실험을 통해 두 상태 변화를 일으키는 일정 전압을 가하기 전까지 각각의 ON 또는 OFF 상태를 계속 유지하여 비휘발성 메모리 소자로 활용할 수 있음을 확인 할 수 있었다. ON 또는 OFF 상태의 전기적 스트레스를 측정으로 ON과 OFF 상태가 안정성을 가지는 것을 관찰 하였다. I-V 특성 결과를 기초로 메모리 소자의 전하수송 메커니즘을 규명 하였다.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.41-44
• /
• 2015

Silicon trench process for bulk fin field effect transistor (finFET) is suggested without using chemical mechanical polishing (CMP) that cause contamination problems with chemical stuff. This process uses thickness difference of photo resistor spin coating and silicon nitride sacrificial layer. Planarization of silicon oxide and silicon trench formation can be performed with etching processes. In this work 50 nm silicon trench is fabricated with AZ 1512 photo resistor and process results are introduced.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2009

As one of the methods for recycling the FRP from the small and medium waste ships, separation of roving layer from the mat has some merits in a sense of the recycling energy and the environmental effects. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer, (2) methanol and isopropanol solution saturated with KOH which can dissolve the glass, or (3) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photo-physically.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.43-46
• /
• 2010

As one of the methods for recycling the FRP used for the small and medium-sized waste ships, separation of the roving layer from the mat has some merit in a sense of the recycling energy and the environmental effects. Similar characteristics between the roving and the mat make the mechanically automatic differentiation difficult. They, however, contain different ratio of the resin and the glass and the thickness. In this study photo physical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer and (2) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring the FRP sample with water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The implementation of HF treatment has been successfully tested in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.79-87
• /
• 2008

Many researchers have studied on rooftop greening that can be installed in abandoned spaces on a building roof. The most important issue in rooftop greening is the soil weight problem. The light greening materials are needed to solve this problem. Therefore, many alternative materials against the soil were investigated for rooftop greening. In this study, the waste wood chips and the waste paper slurry were evaluated as the lightweight vegetation foundation for rooftop greening. It also has a meaning for recycling of waste materials. The mixture ratio of waste wood chips to waste paper slurry for the board (the foundation of greening) was 60 to 40. The wet strength resin and the sizing agent were additionally added with different amount. After the forming of the board, physical and chemical properties were tested with the variation of wet strength resin and sizing agent. As the result of the test, the board with 15% of wet strength resin in the wet condition showed the highest strength. Futhermore, the moisture evaporation loss from the board surface with sizing agent was much lower than that from the board without sizing agent. Therefore, it was clear that the sizing agent was effective for water retention. The change of thickness in the wet condition was less than 1 mm, and it showed that the board is the predominant material on the dimensional stability. The average pH value of the board was ranged from 7.6 to 8.25.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.383-385
• /
• 2013

반도체소자의 고속실현을 위해서 알루미늄배선에서 40% 가량 성능을 높이는 반면 제조비용은 30%까지 낮출 수 있는 구리를 선호하고 있으나, 식각이 잘 되지 않아 원하는 패턴으로 만들어 내기가 곤란한 공정기술의 어려움과 구리물질이 지닌 유독성문제를 가지고 있다. 기존의 식각기술로는 구리패턴을 얻을 수 없는 기술적 한계 때문에 화학.기계적 연마(CMP)를 이용한 평탄화와 연마를 통해서 구리배선을 얻는 다마스커스(Damascene)기술이 개발됐고 이를 이용한 구리배선기술이 현실적으로 가능하게 됐다. CMP를 이용한 평탄화 및 연마 공정에서 Wafer에 도포된 구리의 두께를 실시간으로 측정하여 정밀하게 제어할필요가 있는데, 본 논문에서는 와전류를 이용하여 옹고스트롬 단위의 두께를 실시간으로 측정하여 제어 하는 시스템구현에 대해 기술한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.505-508
• /
• 2008

Concrete is a type of porous materials and is physically and chemically damaged due to exposure to various environments from the placing to the service life. These reactions affect the corrosionof steel bars applied in concrete and that decreases the durability life and strength of such steel bars. Thus, it is very important to insert rust inhibitors into steel bars in the case of a deterioration element that exceeds the critical amount of corrosion in the location of steel bars. However, it is very difficult to guarantee corrosion resistance at the location of steel bars using conventional technology that applies corrosion inhibitors only on the surface of concrete. This study attempts to develop a method that penetrates corrosion inhibitors up to the location of steel bars and investigate the penetration depth of corrosion inhibitors by verifying moisture migration in concrete under an applied pressure.

• Clean Technology
• /
• v.19 no.3
• /
• pp.257-263
• /
• 2013

The zinc phosphate-coated mica (ZP/mica) pigments were prepared using phosphoric acid, zinc nitrate and mica as starting materials, and used as anticorrosive pigments. The scanning electron microscopy (SEM) and x-ray diffraction (XRD) techniques were used to observe the morphology and crystal structure of prepared pigments. The prepared pigments were incorporated into an epoxy binder to prepare coating and the corrosion inhibition performance of the pigments was evaluated using electrochemical impedance spectroscopy (EIS). It was found that the anticorrosive performance of the ZP/mica pigment prepared at $70^{\circ}C$ was the better than that prepared at $20^{\circ}C$. The formation of ZnO, in addition to $Zn_3(PO_4)_2{\cdot}2H_2O$, was observed on ZP/mica pigment prepared at $70^{\circ}C$. The excellent anticorrosive performance of ZP/mica pigment could be ascribed to the synergistic effect with electrochemical anticorrosive mechanism from zinc compounds on mica and barrier anticorrosive mechanism from lamellar mica.

• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.39-44
• /
• 1997

Bulk type radiation detector of Au/Cd$_{1-x}$ Zn$_{x}$Te(x=20%)/Au structure using Cd$_{1-x}$ Zn$_{x}$Te(x=20%) wafer(3x4xl mm$^{3}$) grown by high pressure Bridgman method has been developed. We etched wafer surfaces with 2% Br-methanol solution and coated gold thin film on the surfaces by electroless deposition method for 5 min. in 49/o HAuCI$_{3}$ 4H20 solution. Initial etch rates of Cd, Zn and Te were 46%, 12% and 42% respectively. After etched, the surface of wafer was slightly revealed to Te rich condition. The leakage current was increased with etch time, but it didn't exceed 3nA at 50volt. The thickness of Au film was about 100nm by Rutherford Backscattering Spectroscopy(RBS). The resolution were 6.7% for 22.1 keV photon from 109 $^{109}$ Cd and 8.2% for 59.5 keV photon from $^{241}$ Am. The radiation detector such as Au/Cd$_{1-x}$ Zn$_{x}$Te(x=20%)/Au structure was more effective to monitor the low energy gamma radiation.iation.

• The Journal of Korean Physical Therapy
• /
• v.14 no.2
• /
• pp.219-233
• /
• 2002

스테로이드성 소염진통제인 트리암시놀론 겔의 피부투과도를 향상시키기 위하여 초음파를 조사하여 약물의 투과도에 미치는 영향을 비교하였다. 트리암시놀론을 함유한 수용성 겔을 제조하여 물리화학적 시험을 실시하였으며 carbopol을 기제로한 겔이 우수한 제제학적 특성을 보였다. 초음파 조사가 약물의 투과도에 미치는 영향을 알아보기 위하여 hairless mouse의 적출 피부에 대한 in vitro 흡수 실험을 실시하였다. 트리암시놀론 겔 음파영동군이 트리암시놀론겔 단독 처치군에 비하여 투과도가 유의적으로 향상되었다. 특히 주파수가 1MHz인 지속초음파를 고 강도로 적용시 피부투과도의 향상이 더욱 두드러졌다. 따라서 트리암시놀론 겔 도포 후 초음파를 이용한 음파영동 경피흡수가 단독의 겔 처치보다 피부투과에 유용할 것으로 사료된다.