• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.73-74
• /
• 1996

역삼투막은 높은 투과율과 배제율, 기계적 강도, 열적 안정성, 화학적 안정성, 성형성, 경제성 등의 여러 가지 조건을 동시에 만족시켜야 한다. 복합막을 통한 역삼투막의 제조는 위의 조건들을 만족시키는 역삼투막을 제조할 수 있는 훌륭한 제조 방법인데 지지막과 표면의 활성층을 여러 가지로 조합하여 다양한 성능의 막을 개발할 수 있기 때문이다. 지지막은 다공질의 고분자막으로 기계적 강도, 화학적.열적 안정성 등이 있어야 하는데 역삼투막이 가혹한 운전 조건에서 조작되기 때문이다. 그리고 지지막은 활성층과 안정된 결합을 할 수 있는 물리적 및 화학적 성질을 지녀야 한다. 활성층은 분리가 일어나는 곳으로 막의 배제율과 투과특성에 큰 영향을 미친다. 따라서 복합막의 제조에 있어서 고려되어야 할 사항은 지지막과 활성층의 재질의 선택, 지지막의 특성, 지지막 위에 얇고 안정된 활성층의 도포 방법, 성능향상과 활성층의 안정화를 위한 제조된 복합막의 후처리 방법 등이다. 지지막 위에 활성층을 도포시키는 방법은 계면중합법, 박층분산법, 침지코팅법, 기상증착법 등을 들 수 있는데 이 중에서 계면중합법을 이용한 복합막의 제조가 가장 실용적인 방법으로 인정되고 있고 현재 실용화되어 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.56-63
• /
• 2016

This experiment was compared and analyzed between the original surface paint through chloride penetration, neutralization, freeze-thaw and chemical corrosion resistance measuring internal structure and volume of voids in order to evaluate the effect of increase in durability of the newly modeled nano synthesized polymer paint painted on concrete surface which results improvement on air permeability to increase the durability of concrete structures. The test result of measuring volume of void and inner structure, concrete, spreaded with nano synthesized polymer paint, showed decreasing trend of pore volume in the range of less than $0.1{\mu}m$ and more than $0.3{\mu}m$. Also, using an electron microscope inside showed tightness of hydration texture. Chloride penetration depth of concrete, painted with nano synthesized polymer paint, was decreased more than 92% compared to non-painted concrete and 70% with water-based epoxy painted concrete. Especially, chemical corrosion resistance test set with aqueous solution of 5% sulfuric acid, non-painted concrete and water-based epoxy painted concrete showed weight loss of 4% after dipping for 12 days. On the other hand, concrete painted with nano synthesized polymer paint showed 1.7% weight loss under the same condition. Also, it showed great result of appearance under the criteria of Tsivilis et al.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.195-202
• /
• 2006

Deterioration of sewer concrete is representative that biochemical corrosion according to the $H_2S$ has growth by inhabit sulfur-oxidzing bacteria because of special environment in sewer. But in case of domestic, fundamentally, sulfur-oxidzing bacteria could moderate development of repair material method is need because of corrosion prevent method is inconsideration with carry out to improve project. In this paper, after development of spread type antibiotic with antibio-metal, antibacterial performance about sulfur-oxidzing bacteria of antibiotic and tested to estimate fundamental properties of bonding strength, abrasion contents, contents of water absorption, contents of air permeability, carbonation depth, chloride ion penetration depth and chemical resistance of spread with antibiotic restorative mortar.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.567-578
• /
• 2001

To investigate the difference of Texture exhibited on interproximal enamel surface with each different stripping method and the susceptibility of proximal enamel to demineralization after stripping and the application of a topical fluoride go] and sealant, one hundred human premolars, which were Previously extracted for orthodontic reasons were evaluated by means of Scanning electron microscopy and laser fluorescence. The results were as follows : 1. No matter what the initial stripping instrument was the furrows that resulted from all the stripping methods were not completely removed by careful polishing. 2. Among the enamel surfaces that were treated with three different initial abrasive instruments, followed by the same polishing method (Sof-$Lex^{(r)}$ disks), the enamel surfaces that were treated with 700 crosscut carbide bur showed the smoothest surfaces. 3. The stripped teeth, no matter what the initial stripping instrument was, were less resistant to initial demineralization than untreated teeth. But no difference in caries susceptibility according to differently stripped methods was found (p<(0.001). 4. Teeth treated with APF-gel or sealant were mote resistant to demineralization than those treated without other treatment after stripping (p<0.001). 5. Comparing groups treated with APF-gel to groups treated with sealant, the former was more resistant to demineralization than the tatter (p<0.05). In conclusion, enamel surfaces that were stripped jnterproximally were less resistant to demineralization even though various attempts were made to produce smooth, self-cleaning enamel surfaces. Therefore, additional treatment-sealant or calcifying/ fluoridating solution To the stripped enamel surfaces is recommended.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.265-272
• /
• 2011

Even though concrete is the most important material for building structures, its intrinsic gray color degrades urban esthetics. In order to improve this problem, coloring methods of mixing pigment in concrete batch and painting the surface of concrete surface have been tried. However, applications of the coloring methods in construction field are difficult due to high cost and low durability. Recently, acid stain agent is emerging as a new coloring method for concrete. It is able to apply a remarkably thin colored layer on a concrete surface from chemical reaction between acid and alkaline solutions. This study has examined the changes and variations of the surface layer of mortar specimen from chemical reaction of acid stained agents. The colors were changed into natural irregular stains according to aging. After the staining, no shape change was found from visible inspections. Microstructure of the colored surface applied with acid stained agent was much rougher than that of original mortar. When the colored layer was compared to original surface, crystals of hydrate such as $Ca(OH)_2$ and C-S-H gel were observed. Surface hardness was same or slightly higher in the colored layer. The value of pH was reduced by approximately 10%, weight contents of elements such as Ca, Si, and Al were low. In the chemical composition of the colored layer, the non-cement based elements of Mn, Cr, and Cu increased. Also, Fe and alkali elements of K and Na increased.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.83-88
• /
• 2001

A methodology for enhancing the bond strength of a coating layer with a support has been established in preparing low-pressure reverse osmosis mO) hollow fiber which would experience shear badly in flowing feed un it. Prior to coating process, the support membrane, ultrafiltratiun polysulfone(PS) hollow fibers was pretreated with a reaction solution containing glutaraldehyde (GAl which has a good affinity to the suppurt membrane material as well as a reactivity to some of the cunstituents of cuating layer subsequently formed on the support by interfacial polymerization. Therefore, the reactant GA distributed unifonnly over the support layer through the pretreatment could provide a strong adhesive bond between the coating layer and the support, sticking fast to the support membrane through physical bond and, at the same time, connecting its functional group with the coating laycr by chemical bonding. Due to the strong adhesive bond, the resulting hollow fiber membrane showed an excellent long-tcnn stability in pcnneation.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.2
• /
• pp.434-440
• /
• 2021

This study aimed to understand the effects on the improvement of hair texture by producing a hair texture improvement agent with milk thistle oil, and then applying it to the damaged hair. Each sample before and after application was measured. To understand the effects on the improvement of hair texture, the tensile strength, absorbance with the use of methylene blue, and gloss were measured. In the results of measuring the tensile strength to understand the effects on the improvement of hair texture, In the results of analyzing the absorbance with the use of methylene blue, the value after application was decreased than the value before application. In the results of measuring the gloss, none of the samples showed huge differences. In the results of this study, the milk thistle oil showed the effects on the texture improvement of damaged hair.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.194-198
• /
• 2007

Veneer plate was painted by the treatment with ammonium salts such as ammonium chloride (AMCR), ammonium sulfate (AMSF), monoammonium phosphate (MAPP), and diammonium phosphate (DAPP) at room temperature. The physical property and flammability of painted veneer plate were investigated. In order to evaluate flammability of the treated veneer with ammonium salts, heat release rate (HRR) of the veneer was measured by a cone calorimeter according to ISO 5660-1 standard. The flammability painted veneener plate with ammonium salts was reduced compared to virgin veneer plate. The flashover possibility of veneer plates treated with these ammonium salts was examined by R. V. Petrella's classification using time to ignition and peak heat release rate. The specific gravities of veneer plates treated with only ammonium sulfate were higher than that of virgin veneer plate. Also, the veneer plates treated with ammonium salts showed lower equilibrium moisture contents over virgin veneer.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.249-259
• /
• 2016

Effect of the flame retardants on Dancheong is studied in the present work. Two kinds of flame retardants were applied on Dancheong specimens and compared with control groups on which distilled water was applied instead of the flame retardants. The flame retardants enhanced the hygroscopic property of the surface of Dancheong. Furthermore, the added flame retardants reacted with oyster shell white($CaCO_3$) and lead red($Pb_3O_4$), producing new chemical compounds like Calcium phosphate tribasic and Lead Phosphates which make the painted layer of Dancheong dissolving and whitening over certain period of time. When applied in excessive amount and exposed in repetitive wet and dry condition, especially, they aggravate the surface problems significantly. These results will provide a good reference on the study of the discoloring/whitening effect of Dancheong layers at many traditional wooden building in Korea.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.111-115
• /
• 2005

광 도파관 제작을 위한 마스터를 (100), (110) 실리콘 웨이퍼를 이용하여 제작하였다. DRIE와 화학적 습식 식각을 이용하여 사각형 모양의 부드러운 표면을 가진 마스터를 구현하였다. 식각된 패턴의 거칠기는 광 도파관을 제작할 수 있을 정도로 충분히 작았다. 마스터와 광 도파관의 분리를 용이하게 하기 위하여 마스터에 산화막을 형성하고 PFAS를 도포함으로써 HIBRIMERs 광 도파관을 성공적으로 제작할 수 있었다.