• Composites Research
• /
• v.28 no.5
• /
• pp.265-269
• /
• 2015

Development of simple and efficient method for large-scale production of mechanically strong and electrically conductive graphene fiber is highly desirable for practical applications, such as fiber-reinforced composites, wearable electronics, and electromagnetic irradiation shielding. Here, we present a facile approach for the preparation of amine-functionalized graphene fibers by simple wet-spinning of diamine-functionalized graphene oxide (GO-$NH_2$), which is used because of its synthetic convenience, good dispersity, and scalable production with low cost. The amine-functionalized graphene fiber shows high electrical and mechanical properties compared to pristine graphene oxide fiber due to the electrostatic interaction between amine groups and electronegative functional groups of graphene oxide.

• Clean Technology
• /
• v.24 no.4
• /
• pp.293-300
• /
• 2018

Sulfamethoxazole (SMX) is sulfaamide-based synthetic antibiotics, which are widely prescribed pharmaceutical compound to treat bacterial infections in both human and animals. Most of them are not completely decomposed as refractory substances. The environmental impact of pharmaceuticals as emerging contaminants has generated severe concerns. In this study, catalytic wet peroxide oxidation (CWPO) of SMX was carried out with $Cu/Al_2O_3$ catalyst and investigated the optimum reaction conditions of temperature, dosage of catalyst and concentration of $H_2O_2$ to completely decompose the SMX. It was observed that SMX was completely decomposed within 20 min using 0.79 mM $H_2O_2$ and 6 g $Cu/Al_2O_3$ catalyst at 1 atm and $40^{\circ}C$, but SMX was not fully mineralized and converted to intermediates as hydroylated-SMX, sulfanilic acid, 4-aminobenzenesulfinic acid and nitrobenzene. After that these are completely mineralized through organic acid. We proposed the decomposition reaction path ways of SMX by analyzing the behavior of these intermediates. To investigate the durability of heterogeneous catalyst, decomposition of SMX was observed by continuously recycling catalysts. When the heterogeneous catalyst of 10 wt% $Cu/Al_2O_3$ was continuously reused 5 times, decomposition of SMX was a little lowered, but the activity of catalyst was overall very stable.

• Clean Technology
• /
• v.28 no.4
• /
• pp.293-300
• /
• 2022

The remarkable mechanical, electrical, and thermal properties of graphene have recently sparked tremendous interest in various research fields. One of the most promising methods to produce large quantities of graphene dispersion is liquid-phase exfoliation (LPE) which utilizes ultrasonic waves or shear stresses to exfoliate bulk graphite into graphene flakes that are a few layers thick. Graphene dispersion produced via LPE can be transformed into graphene ink to further boost graphene's applications, but producing high-quality graphene more economically remains a challenge. To overcome this shortcoming, an advanced LPE process should be developed that uses relatively cheap natural graphite as a graphene source. In this study, a flow-LPE process was used to exfoliate natural graphite to produce graphene that was three times cheaper and seven times larger than synthetic graphite. The optimal exfoliation conditions in the flow-LPE process were determined in order to produce high-quality graphene flakes. In addition, the structural and electrical properties of the flakes were characterized. The electrical properties of the exfoliated graphene were investigated by carrying out an ink formulation process to prepare graphene ink suitable for inkjet printing, and fabricating a printed graphene pattern. By utilizing natural graphite, this study offers a potential protocol for graphene production, ink formulation, and printed graphene devices in a more industrial-comparable manner.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.764-768
• /
• 2011

The process of $CO_2$ capture using aqueous Monoethanolamine(MEA) has been considered as one of the leading technologies for intermediate-term strategy to reduce the $CO_2$ emission. This MEA process, however, consumes relatively a large amount of energy in the stripper for absorbent regeneration. For this reason, various process alternatives are recently established to reduce the regeneration energy. This paper suggests a flue gas split configuration as one of MEA process alternatives and then simulates this process using commercial simulator. This flue gas splitting has an effect on reducing the temperature of the lower section of absorber as well as decreasing the absorbent flow rate. Compared to the base model, this optimized flue gas split process provides 6.4% reduction of solvent flow rate and 5.8% reduction of absorbent regeneration energy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.250.1-250.1
• /
• 2015

광학적 특성 중 광 포집 (Light trapping)을 향상시키기 위해 표면의 거칠기 및 형태를 변화시킬 수 있는 방법으로 유리 텍스쳐 방법을 적용시키는 연구가 최근에 많이 진행되고 있다. 본 연구에서 광 포집 및 전류밀도 향상을 위해 페로브스카이트 태양전지의 상부전극에 적용 하였다. 본 연구에서 FTO 기판 후면의 유리 부분을 희석된 HF 용액을 사용하여 습식화학공정을 진행 하였다. 이때 텍스쳐 시간을 조절하여 실험을 진행하였으며, 박막의 광 산란 및 포집 특성을 조절 하였습니다. 텍스쳐된 유리기판을 페로브스카이트 태양전지에 적용 하였을 때, 광 산란 및 포집 효과로 인하여 전류밀도와 효율이 증가됨을 확인하였다. 이러한 유리 텍스처 처리는 다양한 태양전지 구조에 이용될 수 있다.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.294-299
• /
• 1994

CHF$_{3}$/CH$_{4}$Ar 플라즈마에 의해 형성된 산화막 식각 잔류물의 화학구조와 이 잔류물의 제거를 위한 세정방법을 x-ray photoelectron spectroscopy를 이용하여 조사하였다. 잔류무르이 구조는 CF$_{x}$-polymer와 Si-C, Si-O 결합으로 이루어진 SiO$_{y}$ C$_{z}$ 이었다. CF$_{4}$O$_{2}$ 플라즈마에 의한 silicon light etch는 산화막 식각 잔류물인 SiO$_{y}$ C$_{z}$ 층과 손상된 실리콘 표면을 제거하엿으며 NH$_{4}$OH-H$_{2}$O$_{2}$과 HF용액으로 완전히 제거되는 CF$_{x}$-polymer/SiO$_{x}$층을 남겼다. 100.angs.정도의 silicon light etch는 minority carrier life time과 thermal wave signal값을 초기 웨이퍼 수준까지 회복시켰으며 접합누설 전류도 거의 습식 식각 공정수준까지 감소시켰다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.286.2-286.2
• /
• 2013

기존의 이온성 고분자-금속 복합체(IPMC)는 백금(Pt)전극을 이온성 전기활성 고분자(Ionic electroactive polymer)인 나피온에 무전해 도금으로 만들어졌다. 본 연구는 백금전극을 그래핀으로 대체하여 투명 이온성 고분자-그래핀 복합체(IPGC)를 제작하였다. 그래핀은 근적외선 화학기상증착법(NIR-CVD)으로 전이금속 (Cu, Ni) 위에 탄화수소 가스(CH4)를 이용하여 성장하였다. 전이 금속위에 성장된 그래핀을 나피온 양쪽면에 van der Waals 결합력을 이용하는 습식 전이공정으로 전극을 형성하였다. IPGC는 면 저항(4-point probe), 투과도(UV/Vis spectrometer) 및 라만 분광법(Micro Raman spectroscopy)의 측정으로 그래핀 전극의 특성평가를 하였고, 전계방사 주사전자현미경(Field Emisson Scanning Electron Microscope; FE-SEM)을 사용하여 IPGC의 구조적 특성을 확인하였다. 제작된 IPGC의 성능은 백금전극을 이용한 IPMC의 변위(displacement), 힘(force), 작동 주파수(Operating frequency) 분석을 통해 비교 평가하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.273-281
• /
• 2010

Nickel recovery method was studied by the wet process from the catalyst used in hydrogenation process. Nickel content in waste catalyst was about 16%. At the waste catalyst leaching system by the alkaline solution, selective leaching of nickel was possible by amine complex formation reaction from ammonia water and ammonium chloride mixed leachate. The best leaching condition of nickel from mixed leachate was acquired at the condition of pH 8. LIX65N as chelating solvent extractant was used to recover nickel from alkaline leachate. The purity of recovered nickel was higher than 99.5%, and the whole quantity of nickel was recovered from amine complex.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.626-626
• /
• 2009

외부의 전기적인 에너지원 없이 기계적인 힘에 의해 구동되는 투명하고, 유연한 에너지 발생 압력센서를 제작하기 위하여 일차원 산화아연 나노선 기반의 압전소자를 제작하였다1). 산화아연 나노선은 유연한 플라스틱 기판에 습식화학 방법을 이용하여 성장시켰다. 이 방법은 간단한 공정과, 저온 성장공정, 대면적 성장, 대량생산이 가능한 방법이다. 산화아연 나노선의 끝 부분과의 접촉을 위한 상부 전극으로는 PdAu 와 ITO가 증착된 유연한 플라스틱 기판을 사용하였다. 90 % 이상의 높은 투과율을 가진 산화아연 나노선과 ITO 상부전극을 이용하여 투명하고 유연한 에너지 발생소자를 제작하였다. 이를 이용하여 외부에서 작용하는 힘,상부전극의 형상 및 일함수와 나노발전소자의 출력과의 상관관계를 조사하였다. 제작된 투명하고 유연한 나노발전소자의 경우 0.9 kgf에서 1A/$cm^2$ 의 전류가 발생한 것을 확인하였다.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.17-23
• /
• 2015

Flue gas desulfurization(FGD) is the technique to remove $SO_2$ gas from stack gases of coal-fired plants. Many researcher have studied to replace the desulfurizing agent because FGD systems use a lot of limestone and energy. In this study, we use the limestone sludge which is a by-product of steel industry in order to replace desulfurizing agent of FGD system by control the particle size of limestone sludge. And desulfurization performance test is implemented by investigating $SO_2$ gas removal properties upon the characteristic of the limestone sludge with various particle size.